Inactive

This survey is published in compliance with Federal Acquisition Regulation (FAR) Part 10, (Market Research). The purpose of this survey is to locate potential sources to provide sustainment services f... This survey is published in compliance with Federal Acquisition Regulation (FAR) Part 10, (Market Research). The purpose of this survey is to locate potential sources to provide sustainment services for the Joint Tactical Terminal-Senior (JTT-Sr), AN/USC-62A(V)14, all of the JTT-SR variances, and components. There is no solicitation at this time. This request for capability information does not constitute a request for proposals. Submission of any information in response to this market survey is purely voluntary. The Government assumes no financial responsibility for any costs incurred in responding or in any subsequent exchange of information. Requirements Description: This is a market survey to locate potential sources to provide sustainment services for the JTT-Sr, AN/USC-62A(V)14, all of the JTT-SR variances, and components. The JTT-Sr was developed by Raytheon Systems Company, the current owner of the JTT-Sr hardware and components is BAE Systems, Fort Wayne, IN. BAE Systems possesses detailed and complete technical data for the JTT-Sr. The Government does not have nor own the JTT-Sr Technical Data Package. The services covered under the projected contractual requirement includes: depot level sustainment (repair/maintenance) of JTT Sr and JTT Sr Upgrade, to include assemblies and subassemblies, along with associated storage and shipment activities; in addition to, technical support, and Diminishing Manufacturing Sources and Material Shortages monitoring. The period of performance of the projected contractual requirement is 5 years. Test and Inspection and repair services are required for the following items: * NSN 5996-01-460-1484, Power Amplifier, PN 01-01673-001 * NSN 6110-01-504-6694, Power Conditioner, PN 1-01701-002 * NSN 5975-01-467-5849, Mounting Tray, PN 69-00760-002 * NSN 5998-01-498-9183, Receiver Assembly, PN 03-07318-003 * NSN 5998-01-498-9543, Black Power Supply Assembly, PN 03-07321-004 * NSN 5998-01-498-9538, Demodulators Assembly, PN 03-08126-001 * NSN 5998-01-512-6215, Dual Modulator, PN 03-08127-001 * NSN 5998-01-498-9545, Red Power Supply Assembly, PN 03-07343-003 * NSN 5998-01-504-2350, Black COMSEC Interface Module, PN 0N656601-3 * NSN 5998-01-498-9544, Chassis Assembly, PN 03-07509-002 * NSN 5997-01-578-0448, COMSEC Circuit Card, PN 0N717994 Contractors who believe they possess the requisite experience and expertise to meet these requirements should respond by indicating their interest and provide sufficient information or documentation to indicate hoe the requirements would be met. Response may include a capability statement, evidence of having developed and support of similar systems. The source must also complete the following questions. If a question does not apply, please enter N/A or non-applicable. 1) Provide a brief summary of the company and its core competencies. 2) Please provide the following Point of Contact information on all responses: Company: Address: Point of Contact: Phone Number: Fax Numbers: Email Address: CAGE Code: DUNS Number: 3) Describe your Company’s past performance, experience and the qualifications of the engineering staff regarding JTT-Sr, AN/USC-62A(V)14. . 4) Describe your company’s experience in managing obsolescence issues. 5) Does your company maintain a Program and Assessment Tool to monitor and analyze the availability of components to allow clear and precise tracking of all obsolescence issues? If so, please elaborate on the Program and Assessment tool(s). 6) Describe your company’s experience in identifying the alternatives for the unavailability of obsolete materials or components to mitigate obsolescence issues. 7) Discuss your company’s capability in meeting US Government contracting delivery requirements. 8) Do you have product/s or keep products in stock? If you do, please provide Part Number(s) and National Stock Numbers (NSNs). Notice, Response due Date, and Points of Contact: This is NOT a Request for Quote or Proposal. The Government does not intend to award a contract on the basis of this Sources Sought Announcement (SSA) or reimburse any costs associated with the preparation of responses to this SSA. This SSA is for planning and market research purposes only, and shall not be construed as a commitment by the Government. The information gathered from this announcement will be used to determine if responsible sources exist, and to assist in determining if this effort can be competitive and/or set aside for Small Business. Furthermore, the Government will use the information, in part, to determine the best acquisition strategy for a potential services, test and inspection services, and repair services actions and/or to assist in making acquisition strategy decisions in the future. All SSA responses should be emailed to the Technical Points of Contact at the email addresses listed below. No phone inquiries will be accepted, either as a response to this action or for information requests. The response is not to exceed 10 pages in length. Acceptable file formats for the response include Microsoft Word, text, rich text, or Adobe Acrobat. All requests for information must be submitted via email to the Technical Point of Contact. Technical Points of Contact: PRIMARY POINT OF CONTACT: Raymond Lo Electronics Engineer raymond.c.lo.civ@army.milv technical data for the JTT-Sr. The Government does not have nor own the JTT-Sr Technical Data Package. The services covered under the projected contractual requirement includes: depot level sustainment (repair/maintenance) of JTT Sr and JTT Sr Upgrade, to include assemblies and subassemblies, along with associated storage and shipment activities; in addition to, technical support, and Diminishing Manufacturing Sources and Material Shortages monitoring. The period of performance of the projected contractual requirement is 5 years. Test and Inspection and repair services are required for the following items: * NSN 5996-01-460-1484, Power Amplifier, PN 01-01673-001 * NSN 6110-01-504-6694, Power Conditioner, PN 1-01701-002 * NSN 5975-01-467-5849, Mounting Tray, PN 69-00760-002 * NSN 5998-01-498-9183, Receiver Assembly, PN 03-07318-003 * NSN 5998-01-498-9543, Black Power Supply Assembly, PN 03-07321-004 * NSN 5998-01-498-9538, Demodulators Assembly, PN 03-08126-001 * NSN 5998-01-512-6215, Dual Modulator, PN 03-08127-001 * NSN 5998-01-498-9545, Red Power Supply Assembly, PN 03-07343-003 * NSN 5998-01-504-2350, Black COMSEC Interface Module, PN 0N656601-3 * NSN 5998-01-498-9544, Chassis Assembly, PN 03-07509-002 * NSN 5997-01-578-0448, COMSEC Circuit Card, PN 0N717994 Contractors who believe they possess the requisite experience and expertise to meet these requirements should respond by indicating their interest and provide sufficient information or documentation to indicate hoe the requirements would be met. Response may include a capability statement, evidence of having developed and support of similar systems. The source must also complete the following questions. If a question does not apply, please enter N/A or non-applicable. 1) Provide a brief summary of the company and its core competencies. 2) Please provide the following Point of Contact information on all responses: Company: Address: Point of Contact: Phone Number: Fax Numbers: Email Address: CAGE Code: DUNS Number: 3) Describe your Company’s past performance, experience and the qualifications of the engineering staff regarding JTT-Sr, AN/USC-62A(V)14. . 4) Describe your company’s experience in managing obsolescence issues. 5) Does your company maintain a Program and Assessment Tool to monitor and analyze the availability of components to allow clear and precise tracking of all obsolescence issues? If so, please elaborate on the Program and Assessment tool(s). 6) Describe your company’s experience in identifying the alternatives for the unavailability of obsolete materials or components to mitigate obsolescence issues. 7) Discuss your company’s capability in meeting US Government contracting delivery requirements. 8) Do you have product/s or keep products in stock? If you do, please provide Part Number(s) and National Stock Numbers (NSNs). Notice, Response due Date, and Points of Contact: This is NOT a Request for Quote or Proposal. The Government does not intend to award a contract on the basis of this Sources Sought Announcement (SSA) or reimburse any costs associated with the preparation of responses to this SSA. This SSA is for planning and market research purposes only, and shall not be construed as a commitment by the Government. The information gathered from this announcement will be used to determine if responsible sources exist, and to assist in determining if this effort can be competitive and/or set aside for Small Business. Furthermore, the Government will use the information, in part, to determine the best acquisition strategy for a potential services, test and inspection services, and repair services actions and/or to assist in making acquisition strategy decisions in the future. All SSA responses should be emailed to the Technical Points of Contact at the email addresses listed below. No phone inquiries will be accepted, either as a response to this action or for information requests. The response is not to exceed 10 pages in length. Acceptable file formats for the response include Microsoft Word, text, rich text, or Adobe Acrobat. All requests for information must be submitted via email to the Technical Point of Contact. Technical Points of Contact: PRIMARY POINT OF CONTACT: Raymond Lo Electronics Engineer raymond.c.lo.civ@army.milv