Inactive Total Small Business Set-Aside (FAR 19.5)

Please see attached RFQ for all details about this opportunity. AMENDMENT 0001: 10/02/2025 Solicitation amended to answer industry questions. QUESTION: We need to know the INLET pressure of the compre... Please see attached RFQ for all details about this opportunity. AMENDMENT 0001: 10/02/2025 Solicitation amended to answer industry questions. QUESTION: We need to know the INLET pressure of the compressed air. We can mount a pressure regulator so you can control it to your required pressure; Outlet Pressure Range: 5–15 PSIG. ANSWER: The units produce the pressure, there is not a specification for an inlet pressure. We need a minimum output of 15PSI with 4 ports. QUESTION: Is there a technical contact / requestor I could communicate with to better understand the application? ANSWER: All questions may be send to maria.d.diaz-sotomayor.civ@us.navy.mil QUESTION: Is there a specific process to submit these (quotes)? ANSWER: Quotes shall be submitted via email to maria.d.diaz-sotomayor.civ@us.navy.mil AMENDMENT 0002: 10/06/2025 Solicitation amended to answer industry questions. QUESTION: The greatly varying Output capacity, listed as 350-550 SCFD. Usually capacities for compressed air are listed as CFM or SCFM, so I do not know if this was a typo or not. Also, if the spec is for SCFM, the capacity figures of 350-550 SFCM covers 3 different size models. ANSWER: Normal 350 SCFD, or 0.24 SCFM. QUESTION: What is the dewpoint requirement? -40 or -100F ANSWER: No dewpoint requirement, so either is acceptable. QUESTION: What is the Hz on the electrical 50 or 60hz? ANSWER: 60 Hz