Inactive

Amendment 007: The purpose of Amendment 007 is to revise Section L 2.0 PASS/FAIL FACTORS as follows: - Delete: (iv) The Laboratory scope of accreditation shall include the ranges and uncertainties for... Amendment 007: The purpose of Amendment 007 is to revise Section L 2.0 PASS/FAIL FACTORS as follows: - Delete: (iv) The Laboratory scope of accreditation shall include the ranges and uncertainties for the measurement areas required to perform the calibrations with the equipment identified in the total instrument inventory, provided as Attachment 1 to this solicitation. Please see attachment N6660422Q0136P0003. As a result the closing date and time of this solicitation is extended. All other terms and conditions of this solicitation remain unchanged. ___________________________________________________________________ Amendment 006: The purpose of Amendment 006 is to revise the Statement of Work (SOW) Section 4.0 as follows: - Delete: The contractor shall provide valid ISO/IEC 17025 or ANSI Z540.3 Certificates of Laboratory Accreditation upon arrival to each facility. Every calibration shall be an accredited calibration. The accredited calibration shall include a Report of Calibration, before and after measurement data for each measurement, and the uncertainty associated with each measurement. The certificate shall include a statement of compliance that states each calibration measurement meets or exceeds a 4:1 test uncertainty ratio (TUR), or ? 2% Probability of False Accept (PFA) and ? 15% Probability of False Reject (PFR). - Insert: The contractor shall provide valid ISO/IEC 17025 or ANSI Z540.3 Certificates of Laboratory Accreditation upon arrival to each facility. Every calibration shall be an accredited calibration. The accredited calibration shall include a Report of Calibration, before and after measurement data for each measurement, and the uncertainty associated with each measurement. The certificate shall include a statement of compliance that states each calibration measurement meets or exceeds a 4:1 test uncertainty ratio (TUR), or ? 2% Probability of False Accept (PFA) and ? 15% Probability of False Reject (PFR). When a measurement does not meet either a Test Uncertainty Ratio (TUR) ? 4:1 or provide a Probability of False Acceptance (PFA) ? 2% and Probability of False Reject (PFR) ? 15%, it shall be annotated on the calibration report for that measurement. Please see attachment N6660422Q0136P0002. As a result the closing time and date of this solicitation is extended. All other terms and conditions of this solicitation remain unchanged. __________________________________________________________________ Amendment 005: The purpose of Amendment 005 is to provide responses to industry questions and extend the solicitation closing date. Please see attached "Industry Q and A" document. Solicitation closing date is extended to 6 July 2022 at 4 pm EST. All other terms and conditions of the solicitation remain unchanged. _____________________________________________________________________ Amendment 004: The purpose of Amendment 004 is to extend the solicitation closing date to 5 July 2022 at 4 pm EST. All other terms and conditions of the solicitation remain unchanged. ______________________________________________________________________ Amendment 003: The purpose of Amendment 003 is to provide equipment list. Please see attched 'SESEF Active Test Equipment All Sites' document. All other terms and conditions of the solicitation remain unchanged. ________________________________________________________________________ Amendment 002: The purpose of Amendment 002 is to update language provided in Sections L and M. Please see attachment N6660422Q0136P0001. All other terms and conditions of the solicitation remain unchanged. ______________________________________________________________________________ Amendment 001: The purpose of Amendment 001 is to provide responses to industry questions. Please see attached 'Industry Q and A' document. All other terms and conditions of the solicitation remain unchanged. ________________________________________________________________________________ The Naval Undersea Warfare Center Division, Newport (NUWCDIVNPT) intends to award a Firm-Fixed-Price (FFP) Blanket Purchase Agreement (BPA) contract for calibration services in accordance with Solicitation N66604-22-Q-0136 (attached) and the BPA information below. This requirement is being solicited on an unrestricted basis as concurred with by the NUWCDIVNPT Office of Small Business Programs (OSBP). The North American Industry Classification Code (NAICS) for this requirement is 811219. The small business size standard is $22 million. BLANKET PURCHASE AGREEMENT INFORMATION (REQUIRED PER FAR 13.303-3 “PREPERATION OF BPAs”) (1) Description of Agreement. The supplier shall provide calibration repair service as described in the Statement of Work (SOW) located in Section C, if and when requested by the individuals identified in section 4 below. (2) Extent of obligation. The Government is obligated only to the extent of authorized purchases actually made under the BPA. (3) Purchase limitation. The dollar limitation for each individual purchase under the BPA is the Simplified Acquisition Threshold. (4) Individuals authorized to purchase under the BPA. The individuals authorized to purchase under the BPA are as follows: a. For all Orders of any value a warranted Contracting Officer at the Naval Undersea Warfare Center Division, Newport within the limitation of each individuals specified warrant is authorized to purchase under this BPA. b. This BPA permits only the Government employees specifically authorized, to place calls against it. THIS MUST BE STRICTLY ADHERED TO. c. Any services rendered pursuant to a call by an unauthorized person are performed at the contractor’s risk and may result in non-payment and possible cancellation of this agreement. (5) Delivery tickets. All submissions under the agreement shall contain the following minimum information: a. Name of Supplier b. BPA number c. Date of order call d. Order call number e. Itemized list of services furnished f. Unit price of the services g. Date of completion (6) Invoices. Invoices shall be submitted for each individual Calibration and Repair service provided to the Government. No third party billing is allowed (i.e., PaypalTM) a. For all purchases, the invoice shall be submitted in accordance with the appropriate clause in Section G. Attachments: Solicitation N66604-22-Q-0136 Attachment 1 Sample Calibration Items Attachment 2 Wage Determinations Exhibit A CDRLs - Contract Data Requirements List

Inactive

This presolicitation notice is prepared in accordance with FAR 5.2. Proposals are not being requested at this time, and a written solicitation will be issued. The presolicitation notice shall be poste... This presolicitation notice is prepared in accordance with FAR 5.2. Proposals are not being requested at this time, and a written solicitation will be issued. The presolicitation notice shall be posted for a period shorted than 15 days, in accordance with FAR 5.203(a)(1). The solicitation, when posted, will be open for less than 30 days, in accordance with FAR 5.203(b). The Naval Undersea Warfare Center Division, Newport (NUWCDIVNPT) intends to award a Firm-Fixed-Price (FFP) Blanket Purchase Agreement (BPA) contract for calibration services in accordance with the Statement of Work (Attachment 1) and the BPA information below. This requirement is being solicited on an unrestricted basis as concurred with by the NUWCDIVNPT Office of Small Business Programs (OSBP). The North American Industry Classification Code (NAICS) for this requirement is 811219. The small business size standard is $22 million. BLANKET PURCHASE AGREEMENT INFORMATION (REQUIRED PER FAR 13.303-3 “PREPERATION OF BPAs”) (1) Description of Agreement. The supplier shall provide calibration repair service as described in the Statement of Work (SOW) located in Section C, if and when requested by the individuals identified in section 4 below. (2) Extent of obligation. The Government is obligated only to the extent of authorized purchases actually made under the BPA. (3) Purchase limitation. The dollar limitation for each individual purchase under the BPA is the Simplified Acquisition Threshold. (4) Individuals authorized to purchase under the BPA. The individuals authorized to purchase under the BPA are as follows: a. For all Orders of any value a warranted Contracting Officer at the Naval Undersea Warfare Center Division, Newport within the limitation of each individuals specified warrant is authorized to purchase under this BPA. b. This BPA permits only the Government employees specifically authorized, to place calls against it. THIS MUST BE STRICTLY ADHERED TO. c. Any services rendered pursuant to a call by an unauthorized person are performed at the contractor’s risk and may result in non-payment and possible cancellation of this agreement. (5) Delivery tickets. All submissions under the agreement shall contain the following minimum information: a. Name of Supplier b. BPA number c. Date of order call d. Order call number e. Itemized list of services furnished f. Unit price of the services g. Date of completion (6) Invoices. Invoices shall be submitted for each individual Calibration and Repair service provided to the Government. No third party billing is allowed (i.e., PaypalTM) a. For all purchases, the invoice shall be submitted in accordance with the appropriate clause in Section G. Attachments: Attachment 1: Statement of Work