N66001-24-Q-6286 - Brand Name Aerostat
RFQ No. N66001-24-Q-6286 Issue Date: 23 July 2024 1 Combined Synopsis/Solicitation Template This is a combined synopsis/solicitation for commercial products and commercial services prepared in accorda... RFQ No. N66001-24-Q-6286 Issue Date: 23 July 2024 1 Combined Synopsis/Solicitation Template This is a combined synopsis/solicitation for commercial products and commercial services prepared in accordance with the format in Federal Acquisition Regulation (FAR) Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a separate written solicitation will not be issued. This enclosure is an addendum to FAR provision 52.212-1, Instructions to Offerors – Commercial Products and Commercial Services, which applies to this acquisition. Competitive quotes are being requested under Request for Quote (RFQ) Number N66001- 24-Q-6286. The North American Industry Classification System (NAICS) code applicable to this acquisition is 334511 - Aeronautical systems and instruments manufacturing and the small business size standard is 1,350 employees. This procurement is a Small Business Set-Aside. Only quotes submitted by Small Business Concerns will be accepted by the Government. Any quote that is submitted by a non-Small Business Concern will not be considered for award. DESCRIPTION OF REQUIREMENTS The Government is seeking to acquire commercial off the shelf, brand name only Allsopp Helikites, Ltd., Aerostat. To be considered acceptable and eligible for award, quotes must provide all of the items and quantities listed below. The Government will not consider quotes or offers for partial items or quantities. Anticipated contract line items are as follows: CLIN MANUFACTURER DESCRIPTION Part Number QUANTITY UNIT OF MEASURE 0001 Allsopp Helikites Ltd. Camera Payload attachment CPATS 2 EACH 0002 Allsopp Helikites Ltd. 1710 kg Dyneema Line 3 mm 7.1 g/m (300 m) Line1710 600 EACH 0003 Allsopp Helikites Ltd. Barometric Auto Balloon -Cut-Down Device BARO 2 EACH 0004 Allsopp Helikites Ltd. Sheaveblock SHBL 4 EACH 0005 Allsopp Helikites Ltd. Pelicase for shipping and storage PELIC 2 EACH 0006 Allsopp Helikites Ltd. 15 ft Helibase milspec incl air inflator HELB15 2 EACH 0007 Allsopp Helikites Ltd. 34 m3 Skyhook Helikite w/6 mil balloon grey kite, white balloon, incl. webbing straps for radar SKyh34 2 EACH 0008 Allsopp Helikites Ltd. Freight - shipping LOT The expected delivery date is no later than 6 weeks ARO After Receipt of Order (ARO). The Government is seeking Free on Board (FOB) Destination pricing to the following shipping address: San Diego, 92110 (full address will be disclosed at award). OFFEROR INSTRUCTIONS The Government intends to award a Firm Fixed Price (FFP) contract resulting from this solicitation to the responsible offeror whose quotation conforming to the solicitation represents the Lowest Price Technically RFQ No. N66001-24-Q-6286 Issue Date: 23 July 2024 2 Acceptable (LPTA) offer as defined in the "EVALUATION FACTORS FOR AWARD" Section below. A complete quote must be received for consideration. Respond to each item listed below, if the response is "None" or "Not applicable," explicitly state and explain. The Government may consider quotes that fail to address or follow all instructions to be non- responsive and ineligible for contract award. A complete quote includes a response and submission to each of the following: 1. General Information: Offeror Business Name, Address, Cage and DUNS Codes (ensure Representation and Certifications are up to date in SAM.gov), Business Size and Type of Small Business based on applicable NAICS Code as provided above, Federal Tax ID, Primary Point of Contract (to include telephone and e-mail address) and provide a GSA contract number if some or all items proposed are on the GSA schedule. FAR provision 52.212-3, Alternate I, Offeror Representations and Certifications – Commercial Products and Commercial Services, applies to this acquisition. Offerors must include a completed copy of this provision with offer. 2. Technical Documentation: a. Technical Approach or Specifications: Offerors are encouraged to submit product manufacturer specifications, pictures, brochures, or and other pertinent technical information of the quoted brand name engines to facilitate the evaluation. The quote must address and meet the requirements/specifications as defined under Technical Factor I below. b. Sustainable Acquisitions Information and Certification: The contractor shall comply with all sustainable acquisition policies in an effort to minimize the Government's environmental impact and deliver community benefits through better selection and improved usage of products and services. In accordance FAR Part 23, sustainable acquisition policies apply to both contracts for products and services that require the delivery, use, or furnishing of products/services to the Government. Indicate if any the following sustainable acquisition categories apply to any products or services proposed: Energy Efficient, Water Efficient, Recycled, Bio-Based, Environmentally Preferable, Non- ozone depleting substances, Less Toxic and/or Less GHGs. c. Authorized Source Confirmation: The following product certification statement below applies to all line items and each offeror must submit supporting documentation, as needed: To be considered for award, the offeror/contractor is required to submit documentation confirming that they are an authorized source. An "Authorized Source" is defined as the original manufacturer, a source with the express written authority of the original manufacturer or current design activity, or an authorized aftermarket manufacturer. 3. Price Quote: Submit complete pricing for each individual item listed in the "DESCRIPTION OF REQUIREMENTS" Section above to include the unit of issue, the extended price for each line item and a total price in US Dollars ($). Note: Ensure FOB Destination shipping costs are included in the pricing. 4. Commercial Warranty: If available, provide the terms and length of the Workmanship and/or Manufacturer Warranty on the product(s) and/or services proposed included in the proposed purchase price. EVALUATION FACTORS FOR AWARD: Basis for Award: The Government intends to award a contract to the lowest priced, technically acceptable offeror, who is registered in the System for Award Management (SAM); however, the Government reserves the right to award no contract at all, depending on the quality of quotes submitted and availability of funds. A quote will be considered non-responsive if technical acceptability is not met. Technical Acceptability is defined in Factor I below. RFQ No. N66001-24-Q-6286 Issue Date: 23 July 2024 3 Factor I – Technical: The Government will evaluate the quote and verify if the following specification requirements are met to include all information required for a complete quote as defined in paragraph 2 above: This requirement contains supplies that are Brand Name pursuant to FAR 11.105, Items Peculiar to One Manufacturer. To be considered for award, the offeror is required to certify that the product being offered is an original, new, and Trade Agreements Act (TAA) compliant (reference 2(c) above) Allsopp Helikite products. The Government will only accept the required brand name product as specified above. Factor II – Price: The Government will evaluate the total price to determine if it is fair and reasonable. The price quote shall include a unit price for each item and a total firm- fixed-price for all line items. The total firm-fixed-price shall include all applicable taxes, shipping, and handling costs to the shipping address listed above as outlined in paragraph 3 above. Factor III – Past Performance: The Government will evaluate past performance, beginning with the lowest priced quote, by reviewing sources that may include, but are not limited to, information from Government personnel and information from sources such as the offeror's Responsibility/Qualification (R/Q) documentation in System for Award Management (SAM). The Government will consider supplier risk to assess the risk of unsuccessful performance and supply chain risk using the past performance data in the Supplier Performance Risk System (SPRS) to include quality, delivery, and other contractor performance information. DUE DATE AND SUBMISSION INFORMATION Eligible Offerors: All offerors must have a completed registration in the System for Award Management (SAM) website prior to award of contract. Information can be found at https://www.sam.gov/. Complete SAM registration means offerors shall have registered CAGE and DUNS Codes. Page Limitations: Ensure to stay within the page limitations as follows: None Formatting Requirements: Submit quotes in electronic PDF or Excel format; and text shall be formatted on an 8 ½ by 11 inch page in 12 point Times New Roman font. Questions Due Date and Submission Requirements: All questions must be received before 31 July 2024 1500 Pacific Time. Questions must be uploaded on the NAVWAR e-Commerce website at https://e-commerce.DC3N.navy.mil, under NIWC Pacific/Simplified Acquisitions/N66001-24-Q-6286. Include RFQ# N66001-24-Q-6286 on all inquiries. Questions may be addressed at the discretion of the Government. RFQ Due Date and Submission Requirements: This RFQ closes on 1 August 2024 1500 Pacific Time. Quotes must be uploaded on the NAVWAR e-Commerce website at https://e-commerce.DC3N.navy.mil, under NIWC Pacific/Simplified Acquisitions/N66001- 24-Q-6286. E-mail quotes or offers will not be accepted and late quotes will not be accepted. NAVWAR e-Commerce website Assistance: For e-Commerce technical issues, contact the NAVWAR Paperless Help Desk at 858-537-0644 or ebusiness.navwar.fct@navy.mil. Government RFQ Point of Contract: The point of contact for this solicitation is Name of Zachary Pilkington at zachary.t.pilkington.civ@us.navy.mil. Reference RFQ# N66001-24- Q-6286 on all email exchanges regarding this acquisition. RFQ ATTACHMENTS 1. C1.5 Attachment (00) RFQ (Final) RFQ No. N66001-24-Q-6286 Issue Date: 23 July 2024 4 2. C1.5 Attachment (01) FAR & DFARS Reps And Certs 2023-04-05 3. C1.5 Attachment (02) JNCP (Redacted) APPLICABLE PROVISIONS AND CLAUSES This solicitation document incorporates provisions and clauses in effect through Federal Acquisition Circular (FAC) 2024-05 dated 22 May 2024 and Defense Federal Acquisition Regulation Supplement (DFARS) Change Number 05/30/2024. It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The FAR provisions, clauses and deviations can be accessed in full text at https://acquistion.gov/far/ and https://www.acquisition.gov/dfars. The following FAR and DFARS Provisions, incorporated by reference, apply to this acquisition: 52.204-7, System for Award Management 52.204-16, Commercial and Government Entity Code Reporting 52.204-24, Representation Regarding Certain Telecommunications and Video Surveillance Services or Equipment 52.204-26, Covered Telecommunications Equipment or Services-Representation 52.204-29, Federal Acquisition Supply Chain Security Act Orders—Representation and Disclosures 252.203-7005, Representation Relating to Compensation of Former DoD Officials 252.204-7016, Covered Defense Telecommunications Equipment or Services—Representation 252.204-7017, Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services—Representation 252.204-7024, Notice on the Use of the Supplier Performance Risk System 252.213-7000, Notice to Prospective Suppliers on Use of Supplier Performance Risk System in Past Performance Evaluations 252.225-7000, Buy American—Balance of Payments Program Certificate 252.225-7055, Representation Regarding Business Operations with the Maduro Regime 252.225-7059, Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region–Representation. FAR Clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders—Commercial Products and Commercial Services, applies to this acquisition and includes the following clauses by reference: 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards 52.204-27, Prohibition on a ByteDance Covered Application 52.204-30, Federal Acquisition Supply Chain Security Act Orders--Prohibition 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment 52.219-6, Notice of Total Small Business Set-Aside 52.219-28, Post-Award Small Business Program Representation 52.222-3, Convict Labor 52.222-19, Child Labor-Cooperation with Authorities and Remedies 52.222-21, Prohibition of Segregated Facilities 52.222-26, Equal Opportunity 52.222-36, Equal Opportunity for Workers with Disabilities 52.222-50, Combating Trafficking in Persons 52.225-13, Restrictions on Certain Foreign Purchases 52.226-8, Encouraging Contractor Policies to Ban Text Messaging While Driving 52.232-33, Payment by Electronic Funds Transfer—System for Award Management RFQ No. N66001-24-Q-6286 Issue Date: 23 July 2024 5 The following FAR and DFARS Clauses, incorporated by reference, apply to this acquisition: 52.204-13, System for Award Management Maintenance 52.204-18, Commercial and Government Entity Code 52.212-4 , Contract Terms and Conditions—Commercial Items 52.225-13, Restrictions on Certain Foreign Purchases 52.232-39, Unenforceability of Unauthorized Obligations 252.203-7000, Requirements Relating to Compensation of Former DoD Officials 252.203-7002, Requirement to Inform Employees of Whistleblower Rights 252.204-7015, Notice of Authorized Disclosure of Information for Litigation Support 252.204-7018, Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Service 252.204-7022, Expediting Contract Closeout 252.211-7008, Use of Government- Assigned Serial Numbers 252.223-7008, Prohibition of Hexavalent Chromium 252.225-7001, Buy American and Balance of Payments Program—Basic 252.225-7012, Preference for Certain Domestic Commodities 252.225-7056, Prohibition Regarding Business Operations with the Maduro Regime 252.225-7060, Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports 252.232-7006, Wide Area WorkFlow Payment Instructions 252.232-7010, Levies on Contract Payments 252.244-7000, Subcontracts for Commercial Items 252.246-7008, Sources of Electronic Parts 252.247-7023, Transportation of Supplies by Sea—Basic The following FAR and DFARS Provisions and Clauses, incorporated by full text, apply to this acquisition: 52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998) This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es): The FAR provisions, clauses and deviations can be accessed in full text at https://www.acquisition.gov/browse/index/far (FAR clauses and deviations) and https://www.acq.osd.mil/dpap/dars/dfarspgi/current/ (DFARS clauses). (End of clause) 52.252-1, SOLICITATION PROVISIONS INCORPORATED BY REFERENCE This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es): https://www.acquisition.gov/browse/index/far (FAR provisions and deviations) and https://www.acq.osd.mil/dpap/dars/dfarspgi/current/ (DFARS provisions) RFQ No. N66001-24-Q-6286 Issue Date: 23 July 2024 6 (End of provision) 52.252-6 AUTHORIZED DEVIATIONS IN CLAUSES (NOV 2020) (a) The use in this solicitation or contract of any Federal Acquisition Regulation (48 CFR Chapter 1) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the date of the clause. (b) The use in this solicitation or contract of any Defense Acquisition Regulation Supplement (48 CFR Chapter 2) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the name of the regulation. (End of clause) 252.211-7003 ITEM UNIQUE IDENTIFICATION AND VALUATION (MAR 2022) (a) Definitions. As used in this clause- Automatic identification device means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media. Concatenated unique item identifier means-- (1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or (2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number; and serial number within the original part, lot, or batch number. Data Matrix means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards Organization (ISO)/International Electrotechnical Commission (IEC) 16022. Data qualifier means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows. DoD recognized unique identification equivalent means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at https://www.acq.osd.mil/asda/dpc/ce/ds/unique- id.html. DoD item unique identification means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number. Enterprise means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items. Enterprise identifier means a code that is uniquely assigned to an enterprise by an issuing agency. RFQ No. N66001-24-Q-6286 Issue Date: 23 July 2024 7 Government's unit acquisition cost means-- (1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery; (2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery; and (3) For items produced under a time-and-materials contract, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery. Issuing agency means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.aimglobal.org/?Reg_Authority15459. Issuing agency code means a code that designates the registration (or controlling) authority for the enterprise identifier. Item means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts. Lot or batch number means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions. Machine-readable means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards. Original part number means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface. Parent item means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent. Serial number within the enterprise identifier means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise. Serial number within the part, lot, or batch number means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment. Serialization within the enterprise identifier means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier. Serialization within the part, lot, or batch number means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier. Type designation means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto. Unique item identifier means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent. RFQ No. N66001-24-Q-6286 Issue Date: 23 July 2024 8 Unique item identifier type means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html. (b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item. (c) Unique item identifier. (1) The Contractor shall provide a unique item identifier for the following: (i) Delivered items for which the Government's unit acquisition cost is $5,000 or more, except for the following line items: ------------------------------------------------------------------------ Contract line, subline, or exhibit line item No. Item description ------------------------------------------------------------------------ N/A ------------------------------------------------------------------------ (ii) Items for which the Government's unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table: ------------------------------------------------------------------------ Contract line, subline, or exhibit line item No. Item description ------------------------------------------------------------------------ N/A ------------------------------------------------------------------------ (If items are identified in the Schedule, insert ``See Schedule'' in this table.) (iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number ----. (iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment Number ----. (v) Any item not included in paragraphs (c)(1)(i), (ii), (iii), or (iv) of this clause for which the contractor creates and marks a unique item identifier for traceability. (2) The unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the DoD Item Unique Identification Registry by the contractor. (3) The unique item identifier component data elements shall be marked on an item using two dimensional data matrix symbology that complies with ISO/IEC International Standard 16022, Information technology--International symbology specification--Data matrix; ECC200 data matrix specification. (4) Data syntax and semantics of unique item identifiers. The Contractor shall ensure that-- (i) The data elements (except issuing agency code) of the unique item identifier are encoded within the data matrix symbol that is marked on the item using one of the following three types of data qualifiers, as determined by the Contractor: RFQ No. N66001-24-Q-6286 Issue Date: 23 July 2024 9 (A) Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology--EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard. (B) Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology--EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard. (C) Text Element Identifiers (TEIs) (Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with the Air Transport Association Common Support Data Dictionary; and (ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology-Transfer Syntax for High Capacity Automatic Data Capture Media. (5) Unique item identifier. (i) The Contractor shall-- (A) Determine whether to-- (1) Serialize within the enterprise identifier; (2) Serialize within the part, lot, or batch number; or (3) Use a DoD recognized unique identification equivalent (e.g. Vehicle Identification Number); and (B) Place the data elements of the unique item identifier (enterprise identifier; serial number; DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: Original part, lot, or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in MIL-STD- 130, Identification Marking of U.S. Military Property, latest version; (C) Label shipments, storage containers and packages that contain uniquely identified items in accordance with the requirements of MIL-STD-129, Military Marking for Shipment and Storage, latest version; and (D) Verify that the marks on items and labels on shipments, storage containers, and packages are machine readable and conform to the applicable standards. The contractor shall use an automatic identification technology device for this verification that has been programmed to the requirements of Appendix A, MIL-STD-130, latest version. (ii) The issuing agency code-- (A) Shall not be placed on the item; and (B) Shall be derived from the data qualifier for the enterprise identifier. (d) For each item that requires item unique identification under paragraph (c)(1)(i), (ii), or (iv) of this clause or when item unique identification is provided under paragraph (c)(1) (v), in addition to the information provided as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, as part of the Material Inspection and Receiving Report, the following information: (1) Unique item identifier. (2) Unique item identifier type. (3) Issuing agency code (if concatenated unique item identifier is used). RFQ No. N66001-24-Q-6286 Issue Date: 23 July 2024 10 (4) Enterprise identifier (if concatenated unique item identifier is used). (5) Original part number (if there is serialization within the original part number). (6) Lot or batch number (if there is serialization within the lot or batch number). (7) Current part number (optional and only if not the same as the original part number). (8) Current part number effective date (optional and only if current part number is used). (9) Serial number (if concatenated unique item identifier is used). (10) Government's unit acquisition cost. (11) Unit of measure. (12) Type designation of the item as specified in the contract schedule, if any. (13) Whether the item is an item of Special Tooling or Special Test Equipment. (14) Whether the item is covered by a warranty. (e) For embedded subassemblies, components, and parts that require DoD unique item identification under paragraph (c)(1)(iii) of this clause, the Contractor shall report as part of, or associated with, the Material Inspection and Receiving Report specified elsewhere in this contract, the following information: (1) Unique item identifier of the parent item under paragraph (c)(1) of this clause that contains the embedded subassembly, component, or part. (2) Unique item identifier of the embedded subassembly, component, or part. (3) Unique item identifier type.** (4) Issuing agency code (if concatenated unique item identifier is used).** (5) Enterprise identifier (if concatenated unique item identifier is used).** (6) Original part number (if there is serialization within the original part number).** (7) Lot or batch number (if there is serialization within the lot or batch number).** (8) Current part number (optional and only if not the same as the original part number).** (9) Current part number effective date (optional and only if current part number is used).** (10) Serial number (if concatenated unique item identifier is used).** (11) Description. ** Once per item. (f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows: (1) End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at 252.232-7003. If WAWF is not required by this contract, and the RFQ No. N66001-24-Q-6286 Issue Date: 23 July 2024 11 contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site/uidregistry/. (2) Embedded items shall be reported by one of the following methods-- (i) Use of the embedded items capability in WAWF; (ii) Direct data submission to the IUID Registry following the procedures and formats at http://dodprocurementtoolbox.com/site/uidregistry/; or (iii) Via WAWF as a deliverable attachment for exhibit line item number (fill in) ----, Unique Item Identifier Report for Embedded Items, Contract Data Requirements List, DD Form 1423. (g) Subcontracts. If the Contractor acquires by subcontract any items for which item unique identification is required in accordance with paragraph (c)(1) of this clause, the Contractor shall include this clause, including this paragraph (g), in the applicable subcontract(s), including subcontracts for commercial items. (End of clause) H-3 LIMITED RELEASE OF CONTRACTOR CONFIDENTIAL BUSINESS INFORMATION (a) Definition. "Confidential Business ...
Data sourced from SAM.gov.
View Official Posting »