Inactive

RESPONSES TO THIS NOTICE ARE DUE BY 2:00:00 PM Pacific, WHICH SUPERSEDES THE 11:59pm EASTERN RESPONSE TIME SHOWN IN THE GENERAL INFORMATION SECTION ABOVE. As a reminder, the response time identified i... RESPONSES TO THIS NOTICE ARE DUE BY 2:00:00 PM Pacific, WHICH SUPERSEDES THE 11:59pm EASTERN RESPONSE TIME SHOWN IN THE GENERAL INFORMATION SECTION ABOVE. As a reminder, the response time identified in the Solicitation Instruction to offerors is the final authority of when responses are due. _____________________________________________________________________ This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Federal Acquisition Regulation (FAR) Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes only the solicitation; quotes are being requested and a separate written solicitation will not be issued. Competitive quotes are being requested under Request for Quote (RFQ) # N66001-20-Q-6063. For information regarding this solicitation, contact Morgan Darnell by phone at 619-553-5283 or by e-mail at morgan.darnell2@navy.mil. Please use the subject line "N66001-19-Q-6063" on your e-mail messages. Questions and quotes must be uploaded on the NIWC e-Commerce website at https://e- commerce.sscno.nmci.navy.mil, under NIWC Pacific/Simplified Acquisitions/N66001-20-Q-6063. E-mail quotes or offers may not be accepted. For e-Commerce technical issues, contact the NIWC Paperless Initiatives Help Desk at 858-537-0644 or paperless.spawar@navy.mil. THIS IS A BRAND NAME, SIEMEN'S SOLID EDGE, DO NOT SUBSTITUTE REQUIREMENT. To be considered acceptable and eligible for award, quotes must provide all of the items and quantities listed below. The Government will not consider quotes or offers for partial items or quantities. Anticipated contract line items are as follows: Item 0001 Software Maintenance on Solid Edge Classic-Floating-ME&S Install ID: 1003034 MFG: Siemen's P/N: SE290 QTY: 32 Each Period of Performance: 01 Jan 2020 – 31 Dec 2020 Item 0002 Software Maintenance on Solid Edge Classic-Node Locked-ME&S Install ID: 1101247 MFG: Siemen's P/N: SE289 QTY: 1 Each Period of Performance: 01 Jan 2020 – 31 Dec 2020 Item 0003 Software Maintenance on Solid Edge Classic-Node Locked-ME&S Install ID: 1002957 MFG: Siemen's P/N: SE289 QTY: 6 Period of Performance: 01 Jan 2020 – 31 Dec 2020 Item 0004 Maintenance on Solid Edge Simulation-Floating-ME&S Install ID: 1003034 MFG: Siemen's P/N: SE385F QTY: 2 Period of Performance: 01 Jan 2020 – 31 Dec 2020 Item 0005 Maintenance on Solid Edge Wire Harness Design Floating-ME&S Install ID: 1003034 MFG: Siemen's P/N: SE361 QTY: 2 Period of Performance: 01 Jan 2020 – 31 Dec 2020 OPTION YEAR 1 Item 1001 Software Maintenance on Solid Edge Classic-Floating-ME&S Install ID: 1003034 MFG: Siemen's P/N: SE290 QTY: 32 Each Period of Performance: 01 Jan 2021 – 31 Dec 2021 Item 1002 Software Maintenance on Solid Edge Classic-Node Locked-ME&S Install ID: 1101247 MFG: Siemen's P/N: SE289 QTY: 1 Each Period of Performance: 01 Jan 2021 – 31 Dec 2021 Item 1003 Software Maintenance on Solid Edge Classic-Node Locked-ME&S Install ID: 1002957 MFG: Siemen's P/N: SE289 QTY: 6 Period of Performance: 01 Jan 2021 – 31 Dec 2021 Item 1004 Maintenance on Solid Edge Simulation-Floating-ME&S Install ID: 1003034 MFG: Siemen's P/N: SE385F QTY: 2 Period of Performance: 01 Jan 2021 – 31 Dec 2021 Item 1005 Maintenance on Solid Edge Wire Harness Design Floating-ME&S Install ID: 1003034 MFG: Siemen's P/N: SE361 QTY: 2 Period of Performance: 01 Jan 2021 – 31 Dec 2021 OPTION YEAR 2 Item 2001 Software Maintenance on Solid Edge Classic-Floating-ME&S Install ID: 1003034 MFG: Siemen's P/N: SE290 QTY: 32 Each Period of Performance: 01 Jan 2022 – 31 Dec 2022 Item 2002 Software Maintenance on Solid Edge Classic-Node Locked-ME&S Install ID: 1101247 MFG: Siemen's P/N: SE289 QTY: 1 Each Period of Performance: 01 Jan 2022 – 31 Dec 2022 Item 2003 Software Maintenance on Solid Edge Classic-Node Locked-ME&S Install ID: 1002957 MFG: Siemen's P/N: SE289 QTY: 6 Period of Performance: 01 Jan 2022 – 31 Dec 2022 Item 2004 Maintenance on Solid Edge Simulation-Floating-ME&S Install ID: 1003034 MFG: Siemen's P/N: SE385F QTY: 2 Period of Performance: 01 Jan 2022 – 31 Dec 2022 Item 2005 Maintenance on Solid Edge Wire Harness Design Floating-ME&S Install ID: 1003034 MFG: Siemen's P/N: SE361 QTY: 2 Period of Performance: 01 Jan 2022 – 31 Dec 2022 NOTE: IUID Labels are required on all items with a unit cost of $5,000.00 or more per DFARS 252.211- 7003, Item Unique Identification & Valuation. If charging for labels, they must be listed on your quote as a separate line item. Delivery Date: 30 Days or sooner ARO Free on Board (FOB) Destination Shipping Address for Delivery and Acceptance: NAVAL INFORMAITON WARFARE CENTER PACIFIC 4297 Pacific Highway San Diego, CA 92110 The provision at FAR 52.212-1, Instruction to Offerors – Commercial Items (Aug 2018) (Deviation 2018- O00018), applies to this acquisition. The following addendum replaces the text of this provision in its entirety: Addendum to FAR 52.212-1 INSTRUCTIONS TO QUOTERS – COMMERCIAL ITEMS (a) North American Industry Classification System (NAICS) code and small business size standard. The applicable NAICS code is 67,. The small business size standard is $41,500,000.00. (b) Submission of quotations. You must submit your quotation electronically by uploading it to the NIWC e-commerce website at https://e-commerce.sscno.nmci.navy.mil under NIWC Pacific/Simplified Acquisitions/N66001-20-Q-6063. As a minimum, your quotation must show- (1) The solicitation number; (2) The time specified in the solicitation for receipt of quotations; (3) The name, address, and telephone number of the quoter; (4) A technical description of the items being quoted in sufficient detail to evaluate compliance with the requirements in the solicitation. This may include product literature, or other documents, if necessary; (5) Terms of any express warranty; (6) Price and any discount terms; (7) "Remit to" address, if different than mailing address; (8) A completed copy of the provision at FAR 52.212-3, Offeror Representations and Certifications— Commercial Items (Oct 2018)—Alternate I (Oct 2014) (see paragraph (b) of the provision for those representations and certifications that you must complete electronically); and (9) Acknowledgment of solicitation amendments. (c) Reserved. (d) Product samples. Not applicable. (e) Multiple quotations. You are encouraged to submit multiple quotations presenting alternative terms and conditions or commercial items for satisfying the requirements of this solicitation. We will evaluate each quotation that you submit separately. (f) Submission Deadline. (1) You are responsible for submitting your quotation by 4:00 PM Pacific Time on December, 10 2019 (submission deadline). (2) We will consider your quotation if we receive it by the submission deadline. If we receive your quotation after this time, we will not consider it unless we receive it before we issue the purchase order and we determine that considering it would not unduly delay the acquisition. (3) In the event that an emergency or unanticipated event interrupts our normal processes so that we cannot receive your quotation prior to the submission deadline, the submission deadline is automatically extended to the same time of day specified in the solicitation on the first workday on which our normal processes resume. (g) Issuance of purchase order. Award will be made to the responsible vendor, whose quote conforming to the RFQ is most advantageous to the Government, price and other factors considered. Price and past performance will be used to evaluate quotes. However, we may issue a purchase order to a vendor who did not submit a quotation in response to this solicitation. After the evaluation of quotations, we may negotiate final terms with one or more quoters of our choosing before issuing a purchase order. We will not negotiate with any quoters other than those of our choosing and we will not use the formal source selection procedures described in FAR part 15. (h) Multiple purchase orders. We may issue a purchase order for any item or group of items in your quotation, unless you qualify the quotation by specific limitations. Unless otherwise provided in the Schedule, you may not submit a quotation for quantities less than those specified. We reserve the right to issue a purchase order for a quantity less than the quantity quoted, at the unit prices quoted, unless you specify otherwise in the quotation. (i) Availability of requirements documents cited in the solicitation. (1) You may obtain the GSA Index of Federal Specifications, Standards and Commercial Item Descriptions, FPMR Part 101-29, and copies of specifications, standards, and commercial item descriptions cited in this solicitation for a fee by submitting a request to: GSA Federal Supply Service Specifications Section Suite 8100 470 East L'Enfant Plaza, SW Washington, DC 20407 Telephone (202) 619-8925 Facsimile (202) 619-8978. (2) You may download most unclassified Defense specifications and standards from the following ASSIST websites: (i) ASSIST (https://assist.dla.mil/online/start/). (ii) Quick Search (http://quicksearch.dla.mil/). (iii) ASSISTdocs.com (http://assistdocs.com). (3) You may order documents not available from ASSIST from the Department of Defense Single Stock Point (DoDSSP) by- (i) Using the ASSIST Shopping Wizard (https://assist.dla.mil/wizard/index.cfm); (ii) Phoning the DoDSSP Customer Service Desk (215) 697-2179, Mon-Fri, 0730 to 1600 EST; or (iii) Ordering from DoDSSP, Building 4, Section D, 700 Robbins Avenue, Philadelphia, PA 19111-5094, Telephone (215) 697-2667/2179, Facsimile (215) 697-1462. (4) You must obtain nongovernment (voluntary) standards from the organization responsible for their preparation, publication, or maintenance. (j) Data Universal Numbering System (DUNS) Number. (Applies to all quotations exceeding the micro- purchase threshold and quotations of any dollar value if the solicitation requires the Contractor to be registered in the System for Award Management (SAM) database.) You must enter, in the block with your name and address on the cover page of your quotation, the annotation "DUNS" or "DUNS+4" followed by the DUNS or DUNS+4 number that identifies your name and address. The DUNS+4 is the DUNS number plus a 4-character suffix that you may assign at your discretion to establish additional SAM records for identifying additional Electronic Funds Transfer (EFT) accounts (see FAR Subpart 32.11). If you do not have a DUNS number, you should contact Dun and Bradstreet directly to obtain one. If you are located inside the United States, you may contact Dun and Bradstreet by calling 1-866-705-5711 or via the internet at http://fedgov.dnb.com/webform. If you are outside the United States, you must contact the local Dun and Bradstreet office for a DUNS number. You should indicate that you are a quoter for a Government contract when contacting the local Dun and Bradstreet office. (k) System for Award Management. By submission of your quotation, you acknowledge the requirement to register in the SAM database prior to purchase order issuance, during performance, and through final payment of any contract resulting from this solicitation. If you are not registered in the SAM database in the time that we prescribe, we will proceed to issue the purchase order to the next otherwise successful registered quoter. You may obtain information on registration and annual confirmation requirements via the SAM database accessed through https://www.acquisition.gov. (l) Requests for information. We will not notify unsuccessful quoters that responded to this solicitation. You may request information on purchase order(s) resulting from this solicitation from the contracting officer. (m) Solicitation Provisions Incorporated by Reference. (1) Subparagraph (m)(2) below incorporates solicitation provisions by reference, with the same force and effect as if they appeared in full text. Upon your request, we will make their full text available. These provisions may include blocks that you must complete and submit with your quotation. In lieu of submitting the full text of these provisions, you may identify the provision by paragraph identifier and provide the appropriate information with your quotation. Also, you may access the full text of a solicitation provision electronically at this/these address(es): Federal Acquisition Regulation: www.acquisition.gov Defense FAR Supplement: https://www.acq.osd.mil/dpap/ Class Deviations: https://www.acq.osd.mil/dpap/dars/class_deviations.html (2) The following solicitation provisions are incorporated by reference: (i) FAR 52.204-7, System for Award Management (Oct 2018) (ii) FAR 52.204-16, Commercial and Government Entity Code Reporting (Jul 2016) (iii) DFARS 252.203-7005, Representation Relating to Compensation of Former DoD Officials (Nov 2011) (iv) DFARS 252.213-7000, Notice to Prospective Suppliers on Use of Supplier Performance Risk System in Past Performance Evaluations (Mar 2018) (v) DFARS 252.225-7050, Disclosure of Ownership or Control by the Government of a Country that is a State Sponsor of Terrorism (Jan 2018) (n) Authorized Deviations in Provisions. (1) The use in this solicitation of any Federal Acquisition Regulation (48 CFR Chapter 1) provision with an authorized deviation is indicated by the addition of "(DEVIATION)" after the date of the provision. (2) The use in this solicitation of any Defense Federal Acquisition Regulation Supplement (48 CFR Chapter 2) provision with an authorized deviation is indicated by the addition of "(DEVIATION)" after the name of the regulation. (End of addendum) Addendum to FAR 52.212-2 EVALUATION – COMMERCIAL ITEMS (a) The Government intends to award a purchase order to the responsible vendor whose quote, conforming to the RFQ, is most advantageous to the Government, price and other factors considered. Price and past performance will be used to evaluate quotes. The Government reserves the right to award no contract at all, depending on the quality of quotes submitted and availability of funds. Factor I – Technical Acceptability: This requirement contains supplies that are Brand Name pursuant to FAR 11.105, Items Peculiar to One Manufacturer. To be considered for award, the quoter is required to certify that they are an authorized reseller and the products being offered is an original, new Solid Edge Software License Maintenance Renewals. Factor II- Price: The Government will evaluate the total price to determine if it is fair and reasonable. Factor III- Past Performance: The Government will consider data available in the statistical reporting module of the Federal Awardee Performance and Integrity Information System (FAPIIS) regarding the supplier's past performance history. The Government reserves the right to award to the supplies whose quotation represents the best value to the Government. Notice: Any offer rated "Unacceptable" under any one of the above factors may be determined to be ineligible for contract award. (End of addendum) The clause at FAR 52.212-4, Contract Terms and Conditions—Commercial Items (Oct 2018), applies to this acquisition. An addendum to the clause adding paragraphs (w) and (v) is shown below. Addendum to FAR 52.212-4 CONTRACT TERMS AND CONDITIONS—COMMERCIAL ITEMS (w) Clauses Incorporated by Reference. (1) Subparagraph (w)(2) below incorporates one or more clauses by reference, with the same force and effect as if they appeared in full text. Upon your request, we will make their full text available. Also, you may access the full text of a clause electronically at these addresses: Federal Acquisition Regulation: www.acquisition.gov Defense FAR Supplement: https://www.acq.osd.mil/dpap/ Class Deviations: https://www.acq.osd.mil/dpap/dars/class_deviations.html (2) The following clauses are incorporated by reference: (i) FAR 52.204-13, System for Award Management Maintenance (Oct 2018) (ii) FAR 52.204-18, Commercial and Government Entity Code Maintenance (Jul 2016) (iii) FAR 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (Dec 2013) (iv) DFARS 252.203-7000, Requirements Relating to Compensation of Former DoD Officials (Sep 2011) (v) DFARS 252.204-7015, Notice of Authorized Disclosure of Information for Litigation Support (May 2016) (vi) DFARS 252.211-7003, Item Unique Identification and Valuation (Mar 2016) (vii) DFARS 252.223-7008, Prohibition of Hexavalent Chromium (Jun 2013) (viii) DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports (Jun 2012) (ix) DFARS 252.232-7006, Wide Area Workflow Payment Instructions (May 2013) (x) DFARS 252.232-7010, Levies on Contract Payments (Dec 2006) (xi) DFARS 252.244-7000, Subcontracts for Commercial Items (Jun 2013) (xii) DFARS 252.246-7008, Sources of Electronic Parts (May 2018) (xiii) DFARS 252.247-7023, Transportation of Supplies by Sea—Basic (Apr 2014) (v) Authorized Deviations in Clauses. (1) The use in this solicitation or contract of any Federal Acquisition Regulation (48 CFR Chapter 1) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the date of the clause. (2) The use in this solicitation or contract of any Defense Federal Acquisition Regulation Supplement (48 CFR Chapter 2) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the name of the regulation. (End of addendum) The clause at FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes Or Executive Orders—Commercial Items (Oct 2018), applies to this acquisition. The following clauses cited in the clause are incorporated by reference: FAR 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Oct 2018) FAR 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment (Oct 2015) FAR 52.219-6, Notice of Total Small Business Aside (Nov 2011)—Alternate I (Nov 2011) FAR 52.219-28, Post Award Small Business Program Representation (Jul 2013) FAR 52.222-3, Convict Labor (June 2003) FAR 52.222-19, Child Labor—Cooperation with Authorities and Remedies (Jan 2018) FAR 52.222-21, Prohibition of Segregated Facilities (Apr 2015) FAR 52.222-26, Equal Opportunity (Sep 2016) FAR 52.222-35, Equal Opportunity for Veterans (Oct 2015) FAR 52.222-36, Equal Opportunity for Workers with Disabilities (Jul 2014) FAR 52.222-37, Employment Reports on Veterans (Feb 2016) FAR 52.222-50, Combating Trafficking in Persons (Mar 2015) FAR 52.223-18, Encouraging Contractor Policies to Ban Text Messaging while Driving (Aug 2011) FAR 52.225-13, Restrictions on Certain Foreign Purchases (Jun 2008) FAR 52.232-33, Payment by Electronic Funds Transfer— System for Award Management (Oct 2018)