Inactive

Synopsis for solicitation N6449826R0508. This requirement is for a 5 year Contract for supplies for cable cutter and reel machine components. The Naval Surface Warfare Center Philadelphia Division (NS... Synopsis for solicitation N6449826R0508. This requirement is for a 5 year Contract for supplies for cable cutter and reel machine components. The Naval Surface Warfare Center Philadelphia Division (NSWCPD), intends to solicit offers for a firm fixed price, Indefinite Delivery Indefinite Quantity (IDIQ) Contract for the supply of specific components used in cable cutters and reel machines. A Request for Information (RFI) was issued for this requirement under solicitation N6449825R0503. This solicitation being issued for this requirement is N6449826R0508. All materials must meet or exceed requirements as specified in the applicable documents in the solicitation. All materials identified as All materials identified as "Material to be installed in a SUBSAFE Boundary" must conform to SUBSAFE requirements as identified in NAVSEA S9510-AB-PRC-010/SUB and the 100% material traceability requirements as identified in paragraph 3.7.4 of the same document. All materials identified as "LEVEL I Material" must conform to Level I requirements as identified in NAVSEA S9510-AB-PRC-010/SUB. The contract will have a five-year period of performance, commencing on or about 30 May 2026. The components to be supplied under this contract are as follows: ITEM NO. 1: Drum Shaft SK/DWG Number: 8713889 Rev A Applicable Document Reference: 2.1 Part Number: 8713889-001 Estimated Annual Quantity: [Calculate from Total Quantity of 12 over 5 years, or provide an estimate] Unit of Measure: Each Special Requirements: LEVEL I Material/Material to be installed in a SUBSAFE Boundary ITEM NO. 2: Retention Nut SK/DWG Number: 8713950 Rev - Applicable Document Reference: 2.2 Part Number: 8713950-001 Estimated Annual Quantity: [Calculate from Total Quantity of 12 over 5 years, or provide an estimate] Unit of Measure: Each Special Requirements: Material to be installed in SUBSAFE Boundary ITEM NO. 3: Push Rod SK/DWG Number: 8714013 Rev B Applicable Document Reference: 2.3 Part Number: 8714013-001 Estimated Annual Quantity: [Calculate from Total Quantity of 10 over 5 years, or provide an estimate] Unit of Measure: Each Special Requirements: LEVEL I Material/Material to be installed in a SUBSAFE Boundary ITEM NO. 4: Blade Base SK/DWG Number: 8628147 Rev - Applicable Document Reference: 2.4 Part Number: 8628147-001 Estimated Annual Quantity: [Calculate from Total Quantity of 10 over 5 years, or provide an estimate] Unit of Measure: Each Special Requirements: Material to be installed in a SUBSAFE Boundary ITEM NO. 5: Blade Pin SK/DWG Number: 8628334 Rev A Applicable Document Reference: 2.5 Part Number: 8628334-001 Estimated Annual Quantity: [Calculate from Total Quantity of 10 over 5 years, or provide an estimate] Unit of Measure: Each Special Requirements: Material to be installed in a SUBSAFE Boundary ITEM NO. 6: Socket Head Cap Screw (Item 30) SK/DWG Number: 8714000 Rev - Applicable Document Reference: 2.6 Part Number: M1222SN6C336SCNN Estimated Annual Quantity: [Calculate from Total Quantity of 10 over 5 years, or provide an estimate] Unit of Measure: Each Special Requirements: Material to be installed in a SUBSAFE Boundary ITEM NO. 7: Nut Self Locking (Item 43) SK/DWG Number: 8714000 Rev - Applicable Document Reference: 2.6 Part Number: MS17830-6C316 Estimated Annual Quantity: [Calculate from Total Quantity of 10 over 5 years, or provide an estimate] Unit of Measure: Each Special Requirements: Material to be installed in a SUBSAFE Boundary ITEM NO. 8: Plain Washer (Item 39) SK/DWG Number: 8714000 Rev - Applicable Document Reference: 2.6 Part Number: J2655FBR0375S2 Estimated Annual Quantity: [Calculate from Total Quantity of 20 over 5 years, or provide an estimate] Unit of Measure: Each Special Requirements: Material to be installed in a SUBSAFE Boundary For details on the CLIN specifications, structure and quantities per year, see CLIN structure attachment. Detailed specifications, drawings, and other relevant technical information, including SUBSAFE requirements as identified in NAVSEA S9510-AB-PRC-010/SUB, will be included in the full solicitation.