Inactive Total Small Business Set-Aside (FAR 19.5)

The contractor shall procure material and fabricate: Twenty (20) each custom shipping containers referenced in Section 2.0 Applicable Documents - DWG_0096D PC-1A Shipping & Storage Container REV D. Tw... The contractor shall procure material and fabricate: Twenty (20) each custom shipping containers referenced in Section 2.0 Applicable Documents - DWG_0096D PC-1A Shipping & Storage Container REV D. Twenty (20) units 1A Tip Strong back referenced in Section 2.0 Applicable Documents - DWG_0107A_SSN-774PC-1A Post Tooling Tab Tip Support Strong Back Rev A. The contractor shall not deviate from the required parts list. The fabrication shall be in accordance with requirements annotated within the general notes, fabrication notes, welding notes, CAD notes and assembly notes. The contractor shall not deviate from the drawing specifications. The contractor shall deliver shipping crates and tip strong backs on or before August 1, 2020. *Both drawings are Distribution D and shall only be distributed to contractors that are able to receive Distribution D data. Contractors shall have a Joint Certification Program (JCP) certification to be able to receive Distribution D data. Contractors shall request drawings with the Contracting Office by emailing sean.m.mccolgan@navy.mil and including the JCP certification. Amendment 0001: Answer vendor question concerning the type of steel specified in the drawing and update the SOW based on the question. (See attached for additional information)