Inactive Total Small Business Set-Aside (FAR 19.5)

AMENDMENT NOTICE: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this... AMENDMENT NOTICE: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is N6278620T0009 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2021-01. The associated North American Industrial Classification System (NAICS) code for this procurement is 337121 with a small business size standard of 1,000.00 employees. This requirement is a Small Business Set-Aside and only qualified offerors may submit quotes. The solicitation pricing on www.UnisonMarketplace.com will start on the date this solicitation is posted, and, unless otherwise displayed at www.UnisonMarketplace.com, will end on: 2020-10-16 17:00:00.0 Eastern Time. This time supersedes the Offers Due Time listed above. FOB Destination shall be Brunswick, ME 04011 The NAVSEA SUPSHIP - Bath requires the following items, Purchase Description Determined by Line Item, to the following: LI 001: Mess Deck Table Cover Fabric: Naugahyde vinyl or equivalent material Color: Imperial Blue (top and sides); stitching to match Measurement Estimate: 27 ¼ inches wide x 42 ¼ inches long with sewn a 4 inch overhang Design: - Top: To include full color screen printed, etching sublimation, heat press vinyl, or heat press plastisol transfers of Ship’s Crest o Ship’s Crest to be 10 inches high - crest image to be proportionally adjusted widthwise to maintain the integrity of the design - Round Corners - Overhang: To include gold color text screen printed, etching sublimation, heat press vinyl, or heat press plastisol transfers and centered on all four sides o Text – GO FOR BROKE ? All capital letters and 2.5 inches high, 14, EA; LI 002: Mess Deck Table Cover Fabric: Naugahyde vinyl or equivalent material Color: Imperial Blue (top and sides) ; stitching to match Measurement Estimate: 27 ¼ inches wide x 62 ¼ inches long with sewn on 4 inch overhang Design: - Top: To include full color screen printed, etching sublimation, heat press vinyl, or heat press plastisol transfers of Ship’s Crest o Ship’s Crest to be 10 inches high – crest image to be proportionally adjusted widthwise to maintain the integrity of the design - Round Corners - Overhang: To include gold color text screen printed, etching sublimation, heat press vinyl, or heat press plastisol transfers and centered on all four sides o Text – GO FOR BROKE ? All capital letters and 2.5 inches high, 6, EA; LI 003: Mess Deck Table Cover Fabric: Naugahyde vinyl or equivalent material Color: Imperial Blue (top and sides); stitching to match Measurement Estimate: 27 ¼ inches wide x 46 ¼ inches long with sewn on 4 inch overhang Design: - Top: To include full color screen printed, etching sublimation, heat press vinyl, or heat press plastisol transfers of Ship’s Crest o Ship’s Crest to be 10 inches high – crest image to be proportionally adjusted widthwise to maintain the integrity of the design - Round Corners - Overhang: To include gold color text screen printed, etching sublimation, heat press vinyl, or heat press plastisol transfers and centered on all four sides o Text – GO FOR BROKE ? All capital letters and 2.5 inches high, 1, EA; LI 004: Mess Deck Table Cover Fabric: Naugahyde vinyl or equivalent material Color: Imperial Blue (top and sides); stitching to match Measurement Estimate: 27 ¼ inches wide x 24 ¼ inches long with sewn on 4 inch overhang Design: - Top: To include full color screen printed, etching sublimation, heat press vinyl, or heat press plastisol transfers of Ship’s Crest o Ship’s Crest to be 10 inches high – crest image to be proportionally adjusted widthwise to maintain the integrity of the design - Round Corners - Overhang: To include gold color text screen printed, etching sublimation, heat press vinyl, or heat press plastisol transfers and centered on all four sides o Text – GO FOR BROKE ? All capital letters and 2.5 inches high, 3, EA; LI 005: CPO Mess Table Cover Fabric: Naugahyde vinyl or equivalent material Color: Imperial Blue (top and sides); stitching to match Measurement Estimate: 30 ¼ inches wide x 72 ¼ inches long with sewn on 4 inch overhang Design: - Top: To include full color screen printed, etching sublimation, heat press vinyl, or heat press plastisol transfers of USS DANIEL INOUYE DDG 118 CPO Anchors design centered on middle of table o Design to be 10 inches high and proportionally adjusted widthwise to maintain the integrity of the design - Overhang: To have USS DANIEL INOUYE DDG 118 CPO Anchor Design in each corner; two per side – 8 total in full color screen printed, etching sublimation, heat press vinyl, or heat press plastisol transfers - Round Corners, 3, EA; LI 006: CPO Mess Table Cover Fabric: Naugahyde vinyl or equivalent material Color: Imperial Blue (top and sides); stitching to match Measurement Estimate: 30 ¼ inches wide x 48 ¼ inches long with sewn on 4 inch overhang Design: - Top: To include full color screen printed, etching sublimation, heat press vinyl, or heat press plastisol transfers of USS DANIEL INOUYE DDG 118 CPO Anchors design centered on middle of table o Design to be 10 inches high and proportionally adjusted widthwise to maintain the integrity of the design - Overhang: To have USS DANIEL INOUYE DDG 118 CPO Anchor Design in each corner; two per side – 8 total in full color screen printed, etching sublimation, heat press vinyl, or heat press plastisol transfers - Round Corners, 1, EA; LI 007: Wardroom Table Cover Fabric: Naugahyde vinyl or equivalent material Color: Imperial Blue (top and sides); stitching to match Measurement Estimate: 48 ¼ inches wide x 168 ¼ inches long with sewn on 4 inch overhang Design: - Top: To include full color screen printed, etching sublimation, heat press vinyl, or heat press plastisol transfers of Ship’s Crest o Ship’s Crest to be 10 inches high – crest image to be proportionally adjusted widthwise to maintain the integrity of the design - Overhang: To have SWO pins in each corner; two per side – 8 total in gold color screen printed, etching sublimation, heat press vinyl, or heat press plastisol transfers - Round Corners, 1, EA; LI 008: Wardroom Table Cover Fabric: Naugahyde vinyl or equivalent material Color: Imperial Blue (top and sides); stitching to match Measurement Estimate: 27 ¼ inches wide x 96 ¼ inches long with sewn on 4 inch overhang Design: - Top: To include full color screen printed, etching sublimation, heat press vinyl, or heat press plastisol transfers of Ship’s Crest o Ship’s Crest to be 10 inches high – crest image to be proportionally adjusted widthwise to maintain the integrity of the design - Overhang: To have SWO pins in each corner; two per side – 8 total in gold color screen printed, etching sublimation, heat press vinyl, or heat press plastisol transfers - Round Corners, 1, EA; LI 009: Wardroom Seat Cover Fabric: Naugahyde vinyl or equivalent material Color: Imperial Blue; stitching to match Dimensions: attached (Chair w/ Arms) Design: Back of Chair will have a large embroidered Surface Warfare Officer (SWO) pin, gold in color, 26, EA; LI 010: CO Wardroom Seat Cover Fabric: Naugahyde vinyl or equivalent material Color: Imperial Blue; stitching to match Dimensions: attached (Chair w/ Arms) Design: - Back of Chair: o Will have a large embroidered Command at Sea pin and the letters “CO” above the pin, gold in color., 2, EA; LI 011: XO Wardroom Seat Cover Fabric: Naugahyde vinyl or equivalent material Color: Imperial Blue; stitching to match Dimensions: attached (Chair w/ Arms) Design: - Back of Chair: o Will have an embroidered SWO pin and the letters “XO” above the pin, gold in color., 2, EA; LI 012: CPO Seat Cover Fabric: Naugahyde vinyl or equivalent material Color: Imperial Blue; stitching to match Dimensions: attached (L-shape chair with no arms) Design: - Back of Chair Cover: To include full color screen printed, etching sublimation, heat press vinyl, or heat press plastisol transfers of USS DANIEL INOUYE DDG 118 CPO Anchors design centered on back of chair cover, 20, EA; LI 013: Serving Line Awning Fabric: Nonporous material Color: Imperial Blue with white trim; stitching to match Measurements Estimate: 33 feet in length Design: - Scalloped Awning - To include, four (4) full color screen printed, etching sublimation, heat press vinyl, or heat press plastisol transfers of Ship’s Crest o Ship’s Crest to be 6-8 inches high - crest image to be proportionally adjusted widthwise to maintain the integrity of the design o Placement of crest ? One each on both ends; two total ? Two each centered between text and end on front of awning - To include gold color text screen printed, etching sublimation, heat press vinyl, or heat press plastisol transfers and centered on the awning o Text – ONO KINE GRINDZ ? All capital letters and 6-8 inches high o Mounting – 15 inch strips of Velcro from end to end and evenly spaced with the soft side sewn onto the awning. The Velcro hard side with adhesive should be shipped with the awning for installation., 1, EA; LI 014: Digitization fee – if required - USS DANIEL INOUYE DDG 118 Ship’s Crest - Vendor to create - USS DANIEL INOUYE DDG 118 Chief Petty Officer (CPO) Anchors o Chief anchor on the left, Master Chief anchor in the center, Senior Chief anchor on the right. o Anchors are gold in color with silver stars on top of the Senior Chief and Master Chief anchor. The letters “USN” on each anchor will be silver in color o Arched above the anchors is the text “USS DANIEL INOUYE DDG 118” gold in color - Surface Warfare Officer (SWO) pin, if required - Command at Sea pin, if required, 1, LT; LI 015: Conduct site visit to take measurements for all covers and provide samples of materials, prior to manufacturing., 1, LT; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.UnisonMarketplace.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, NAVSEA SUPSHIP - Bath intends to document quotes online to be facilitated by the third-party Marketplace, Unison, Inc. Unison Marketplace has developed an online, anonymous, browser based application to document pricing. Offerors may submit quotes during the specified period of time. NAVSEA SUPSHIP - Bath is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time quotes. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their quote using the online exchange located at www.UnisonMarketplace.com. There is no cost to register, review procurement data or make a quote on www.UnisonMarketplace.com. Offerors that are not currently registered to use www.UnisonMarketplace.com should proceed to www.UnisonMarketplace.com to complete their free registration. Offerors that require special considerations or assistance may contact Marketplace Support at 1.877.933.3243 or via email at marketplacesupport@unisonglobal.com. Offerors may not artificially manipulate the price of a transaction on www.UnisonMarketplace.com by any means. It is unacceptable to place bad faith quotes, to use decoys in the www.UnisonMarketplace.com process or to collude with the intent or effect of hampering the competitive www.UnisonMarketplace.com process. Should offerors require additional clarification, notify the point of contact or Marketplace Support at 1.877.933.3243 or marketplacesupport@unisonglobal.com. Use of Unison Marketplace: Buyers and Sellers agree to conduct this transaction through Unison Marketplace in compliance with the Unison Marketplace Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. In addition to providing pricing at www.FedBid.com for this solicitation, each Offeror must provide any required, NON-PRICING responses (e.g. technical proposal, representations and certifications, etc.) so that they are received no later than the closing date and time for this solicitation. Submissions can be sent to clientservices@fedbid.com. This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to FAR 4.1102 and other applicable regulations and guidelines. Information can be found at www.sam.gov. Registration must be "ACTIVE" at the time of award. All Bids must be valid for 30 days from the closing date for this solicitation. No exceptions or qualifications. New equipment ONLY, NO grey market or refurbished products. Items must be in original packaging, never used, and not altered in any way. Components of the requested equipment, to include memory, must be manufacturer-approved and may not be compatible, remanufactured, or refurbished equipment. All items must be covered by manufacturer’s warranty and procured through a manufacturer approved distribution channel. Sellers must be able to document their ability to provide items through manufacturer approved distribution channels upon request. The Seller confirms to have sourced all products submitted in this Bid from manufacturer-approved channels for Federal sales, in accordance with all applicable laws and manufacturer’s current applicable policies at the time of purchase. Seller must be able to support both the product sale and product pricing, in accordance with applicable manufacturer certification / specialization requirements. If software is provided or included, Seller shall, upon request, provide Buyer with a copy of the End User License Agreement. Seller certifies that all software is licensed originally to Buyer as the original licensee authorized to use the software. All bid prices must include shipping FOB Destination CONUS (CONtinental U.S.). No partial shipments are permitted, unless otherwise specified by Contracting Officer at time of award. The selected Offeror must comply with the following commercial item terms and conditions. FAR 52.212-1, Instructions to Offerors - Commercial, applies to this acquisition. The selected Offeror must submit a completed copy of the provision at 52.212-3, Offeror Representations and Certifications - Commercial Items. FAR 52.212-4, Contract Terms and Conditions - Commercial Items, applies to this acquisition. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, will apply: 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of a FAR clause may be accessed electronically at http://www.acquisition.gov/far/