Inactive Total Small Business Set-Aside (FAR 19.5)

Purchase and install of electronic sign. See Statement of Work and Brand Name Justification. Outdoor LED Sign: Single sided display. Brand: Daktronics, with no substitutions allowed Model: Graphics an... Purchase and install of electronic sign. See Statement of Work and Brand Name Justification. Outdoor LED Sign: Single sided display. Brand: Daktronics, with no substitutions allowed Model: Graphics and Animation Capable Galaxy GT6X Series, 10MM LED RGB, and supporting hardware such as modem and electrical wiring Cabinet Size: 2’-11” tall x 6’-3” wide Cabinet and Pole Color: Black Viewing Area: 2.5’ x 6’ Electrical Requirements: 120V, 15.76 Amps for the display Software: Daktronics Web Based Application with Verizon cellular service for the lifetime of the display. Temperature Sensor: Shall include temperature sensor Installation: Installation required of sign and all supporting structure such as Auger hole, Culvert Pipe, Steel Support Pole, Concrete and all labor to install LED sign. Distance from top of display to the ground shall be approximately 76” to match height of adjacent signage on the other side of the walkway. Installation of display to allow addition of decorative stucco and brick encasement in future if desired. One Time Training: on Venus Control Suite Software Web based software application used to produce graphics and messages. Training on CD will also be provided. Warranties and Service: Five-year parts warranty and a Two-year maintenance service, Service maintenance may not be subcontracted out. Ability for the vendor to appear onsite at NSWC PCD within 12 – 24 hours after a service call is initiated is required. Documentation: Documentation of sign compliance to local, state, and federal requirements is required. Schedule: Installation and billing shall occur no later than 9 SEP 2020. All Shipping and Delivery Charges must be Included. This acquisition will be conducted using simplified acquisition procedures with a total estimated value of $23,000. The Government's minimum needs have been verified by the certifying technical and requirements personnel. This memo does not authorize acquisition for other requirements. This purchase will be funded with FY20 Navy Working Capital funds. Installation and billing shall be completed no later than 9 September 2020.