Inactive Total Small Business Set-Aside (FAR 19.5)

Contractor is to install steel tube and clamp type staging for Ship Force use in accordance with 29 CFR PART 1915, SAFETY AND HEALTH STANDARDS in locations (01-26-0-X) No 1 Ram Launcher ; (03-96-0-X) ... Contractor is to install steel tube and clamp type staging for Ship Force use in accordance with 29 CFR PART 1915, SAFETY AND HEALTH STANDARDS in locations (01-26-0-X) No 1 Ram Launcher ; (03-96-0-X) No 2 Ram Launcher; AFT AEMS Antenna (03-96-0-X); and Food Service / Package Dumbwaiter (6-61-1-Q). Contractor shall inspect and certify staging listed on the attached SAP for Ship force Staging. Government to provide for interference removal and installation, isolating and tagging out of system, rigging and transporting of equipment. Contractor shall install and remove staging once all work is completed. The staging shall be installed on all four sides of each RAM Launcher located in 01 level and 03 level, extending 4 feet around the Launchers and 12 feet above the deck so that personnel can walk around the entire area of the RAM weapon system. Staging is also required for outside of the AFT AEMS MAST 03 level FWD bulkhead 12 feet tall and 30 feet under exterior AFT Mast to access platform. Staging for the Food Service Dumbwaiter (6-61-1-Q) is required in the Dumbwaiter Trunk from inner bottom to the 01 level. Remove staging upon completion of work and when directed by SUPERVISOR.