Inactive Total Small Business Set-Aside (FAR 19.5)

The Regional Maintenance Center at Puget Sound Naval Shipyard and Intermediate Maintenance Facility (PSNS & IMF), Bremerton, Washington intends to award a stand-alone Firm-Fixed-Price contract to acco... The Regional Maintenance Center at Puget Sound Naval Shipyard and Intermediate Maintenance Facility (PSNS & IMF), Bremerton, Washington intends to award a stand-alone Firm-Fixed-Price contract to accomplish maintenance, repair and preservation on UF 116 & 127. The UF-116 & UF-127 equipment characteristics can be found in section 1.1 of the attached Statement of Works (SOWs). The contractor’s facility must possess the capability of accommodating the UF’s with the characteristics as found in the SOWs. Coordinate with the Contracting Officer, via the Contracting Officer’s Representative (COR) to deliver the vessel to the Contractor’s facility. Upon docking vessel, wash and clean vessel. Remove existing rubber fenders and associated hardware; retain hardware and fasteners. for installation after sweep-blast cleaning. Remove existing and install new zinc anodes. Preserve interior and exterior of tank covers, replace all gaskets. Blast and preserve main deck, hull, freeboard and components. Apply new non-skid and coating system to the main deck. Undock the vessel. Arrange and coordinate the delivery of the vessel back to the Government with the Contracting Officer via the COR. The Period of Performance (PoP) is scheduled to be from 2 Aug 2022 through 27 Oct 2022. This is a total small business set-aside under the North American Industry Classification System (NAICS) 336611, small business size standard 1,250 employees. The Government intends award a Firm-Fixed Price, stand-alone contract in June 2022 to the responsible contractor on a lowest price, technically acceptable basis in accordance with but not limited to the Federal Acquisition Regulation (FAR) 15.101-2. Offerors can view and/or download the draft notional work specifications for review at https://www.sam.gov. All offerors must be registered with the System for Award Management (SAM) to receive award of Government contracts. Offerors are advised also that SAM representations and certifications can be completed electronically via the System for Award Management website at https://www.sam.gov.

Inactive Total Small Business Set-Aside (FAR 19.5)

The Regional Maintenance Center at Puget Sound Naval Shipyard and Intermediate Maintenance Facility (PSNS & IMF), Bremerton, Washington intends to award a stand-alone Firm-Fixed Price contract to acco... The Regional Maintenance Center at Puget Sound Naval Shipyard and Intermediate Maintenance Facility (PSNS & IMF), Bremerton, Washington intends to award a stand-alone Firm-Fixed Price contract to accomplish docking and maintenance of Utility Float (UF) 116 and 127. The characteristics of each vessel can be found in section 1.1 of the attached draft Statement of Work (SOW) documents. The Contractor’s facility must possess the capability of accommodating the Utility Floats with the characteristics as found in the SOWs. Coordinate with the Contracting Officer, via the Contracting Officer’s Representative (COR) to deliver the vessels to the Contractor’s facility. Dock, wash, and clean the exterior surfaces of the vessels upon docking. Remove all fendering. Blast and preserve all exterior surfaces of the vessel. Replace zinc anodes. Preserve Hull and Freeboard exterior. Touch up preservation in tanks/void. Hull and main deck require ultrasonic measurement of plating thickness. Open, clean, inspect and test tanks. Vessels require inspection for damage and deterioration (hull, main deck, tanks and voids). Apply new nonskid system to main deck. Undock the vessels. Arrange and coordinate the delivery of the vessels back to the Government with the Contracting Officer via the COR. The expected Period of Performance (PoP) is scheduled to be from 2 August 2022 through 27 October 2022. The Government is contemplating a total small business set-aside under the North American Industry Classification System (NAICS) 336611, size 1,250 employees. The Government intends to post a request for proposals in April 2022 and anticipates award of the Firm-Fixed Price, stand-alone contract in June 2022 to the responsible Contractor on a lowest price, technically acceptable basis in accordance with but not limited to the Federal Acquisition Regulation (FAR) 15.101-2. Offerors can view and/or download the draft notional work specifications for review at https://sam.gov. All offerors must be registered with the System for Award Management (SAM) to receive award of Government contracts. Offerors are advised also that SAM representations and certifications can be completed electronically via the System for Award Management website at https://www.sam.gov. Notice Regarding Pre-Solicitation Synopsis: Information provided shall be treated as Business Sensitive or Confidential to the responder, exempt from public release under the Freedom of Information Act. PSNS & IMF may request further information regarding the capabilities of respondents to meet the requirements set forth in the announcement. This pre-solicitation announcement is released in accordance with FAR 5.2. Information provided in response to this pre-solicitation announcement is for informational and planning purposes only, will not be considered an offer by the responding contractor and cannot be accepted by the Government to form a binding contract.

Inactive

The Regional Maintenance Center at Puget Sound Naval Shipyard & Intermediate Maintenance Facility (PSNS & IMF) is conducting market research to determine industry capability and interest in performing... The Regional Maintenance Center at Puget Sound Naval Shipyard & Intermediate Maintenance Facility (PSNS & IMF) is conducting market research to determine industry capability and interest in performing docking and maintenance for Utility Floats (UF) 116 and 127. The vessel characteristics can be found in section 1.1 of the attached draft Statement of Works (SOW). The Contractor’s facility must possess the capability of accommodating the UF 116 and 127 with the characteristics as found in the SOWs. Coordinate with the Contracting Officer, via the Contracting Officer’s Representative (COR) to deliver the vessel to the Contractor’s facility. Dock, wash, and clean the exterior surfaces of the vessel upon docking. Remove all fendering. Blast and preserve all exterior surfaces of the vessel. Replace zinc anodes. Preserve Hull and Freeboard exterior. Touch up preservation in tanks/void. Hull and main deck require ultrasonic measurement of plating thickness. Open, clean, inspect and test tanks. Vessel requires inspection for damage and deterioration (Hull, main deck, tanks and voids. Apply new nonskid system to main deck. Undock the vessel. Arrange and coordinate the delivery of the vessel back to the Government with the Contracting Officer via the COR. The notional schedule is listed below is provided for planning purposes only. The Government is not obligated to pursue this schedule or a future solicitation because of this Sources Sought. Period of Performance: August 2022 through October 2022 What/Where to Submit: Interested companies should submit, on company letterhead, a notice of interest including the name, telephone number, mailing address, and e-mail address of one point of contact. Please hand or digitally sign your letter of interest and e-mail it to the Government contacts listed below, with "N4523A22R1055 Sources Sought Response" in the subject field. The notice of interest should include a brief description of your company and its capabilities as they relate to the requirements set forth in the description shown above, and answers to the following specific questions. Please limit your response to no more than 5 pages. 1. Is your company a small or large business as defined by the Small Business Administration (SBA) under NAICS code 336611 (a small business must have 1,250 or less employees)? 2. Does your company have a satisfactory performance record for the type of work required? Please provide examples of relevant and recent (within three years) past performance. 3. Does your company have the necessary organization, experience, accounting and operational controls, and technical skills, or the ability to obtain them (including, as appropriate, such elements as production control procedures, property control systems, quality assurance measures, and safety programs applicable to materials to be produced or services to be performed by the prospective contractor and subcontractors)? 4. Given the work described in this announcement, does your company plan to submit a proposal in response to the anticipated solicitation?