Inactive
Total Small Business Set-Aside (FAR 19.5)
Notice ID:N4523A21R1060
The Regional Maintenance Center at Puget Sound Naval Shipyard & Intermediate Maintenance Facility (PSNS & IMF) is conducting market research to determine industry capability and interest in performing...
The Regional Maintenance Center at Puget Sound Naval Shipyard & Intermediate Maintenance Facility (PSNS & IMF) is conducting market research to determine industry capability and interest in performing maintenance, repair, and preservation in support of one (1) Dive Boat 65SC8801. Work will be accomplished at the Contractor's facility. The Government is seeking responses from sources that can perform the following work: Dive Boat 65SC8801 Characteristics: 65 FT Dive Boat MK-1 Built by: Swift Ships Length: 64 FT - 6 IN Width: 18 FT - 10 IN Age: 32 YRS Hull type: Aluminum Draft: 3 FT - 10 IN Full Displacement: 42 L Tons Light Load: 35 L Tons Scope Overview: Coordinate with the Contracting Officer (KO), via the Contracting Officer’s Representative (COR) to deliver the vessel to the Contractor’s facility. Upon docking vessel, wash and clean vessel. Dock, wash, and clean the exterior surfaces of the vessel upon docking. Remove all fendering and sweep blast clean. Perform visual inspection of hull and freeboard, tanks and main decks surfaces. Apply new Non-skid preservation system to the main-deck. Accomplish repairs on AFT Lazzerette hatch, Aft Port Stanchion and base, Main Cabin window, Port, STBD, and AFT doors, Drip pan, lagging, Fuel piping manifold, Grey water overboard, MPDE Overboad discharge, and Generator Supply Valves. Replace decking in Pilot house, Galley, Diver Prep Room, WC and Shower Area, and Berthing Compartment. Blast and preserve underwater hull, body, appendages, and freeboard surfaces, pilothouse exterior. Inspect and repair shafts and rudders and associated seals, bearings, bushings and test for operability after repairs. Perform inspections on the propellers, pitch, and balance and test for operability. Open, clean, inspect, disinfect, certify, and preserve various tanks and voids including the fresh water system. Remove existing and install new zincs and associated hardware. Conduct air test of tanks and voids. Perform seatrials after completion of repairs and full cure time of preservation. Undock the vessel. Arrange and coordinate the delivery of the vessel back to the Government with the KO via the COR. The notional schedule listed below is provided for planning purposes only. The Government is not obligated to pursue this schedule for a future solicitation because of this Sources Sought. Dive Boat 65SC8801 Period of Performance (POP): August 2021 through October 2021 What/Where to submit: Interested companies should submit, on company letterhead, a notice of interest including the name, telephone number, mailing address, and e-mail address of one point of contact for the company. Please hand or digitally sign your letter of interest and e-mail it to the Government contacts listed below, with "Dive Boat 65SC8801 Sources Sought Response" in the subject field. The notice of interest should include a brief description of your company and its capabilities as they relate to the requirements set forth in the description above, and answers to the following specific questions. Please limit your response to no more than 5 pages. 1. Is your company a small or large business as defined by the Small Business Administration (SBA) under NAICS code 336611 (a small business must have 1,250 or less employees)? 2. Does your company have a satisfactory performance record for the type of work required? Please provide examples of relevant and recent (within three years) past performance. 3. Does your company have the necessary organization, experience, accounting and operational controls, and technical skills, or the ability to obtain them (including, as appropriate, such elements as production control procedures, property control systems, quality assurance measures, and safety programs applicable to materials to be produced or services to be performed by the prospective contractor and subcontractors)? 4. Given the work described in this announcement, does your company plan to submit a proposal in response to the anticipated solicitation for the Dive Boat 65SC8801 package? When to Submit: Responses are requested no later than 10:00AM PST, on 05 February 2021. Notice Regarding Sources Sought: This sources sought is issued solely for information and planning purposes - it does not constitute a Request for Proposal (RFP) or a promise to issue an RFP in the future. This sources sought does not commit the Government to contract for any supply or service whatsoever. Further, the Navy is not seeking proposals at this time, nor accepting unsolicited proposals. Responders are advised that the U.S. Government will not pay for any information or administrative costs incurred in response to this source sought; all costs associated with responding to this source sought will be solely at the interested party's expense. Not responding to this sources sought does not preclude participation in any future RFP, if any is issued. If a solicitation is released, it will be synopsized on the Beta SAM website (beta.sam.gov). It is the responsibility of the potential offerors to monitor these sites for additional information pertaining to this requirement. Information provided shall be treated as Business Sensitive or Confidential to the responder, exempt from public release under the Freedom of Information Act. PSNS&IMF may request further information regarding the capabilities of respondents to meet the requirements set forth in the announcement. This sources sought announcement is released in accordance with FAR 15.201. Information provided in response to this sources sought announcement will not be considered an offer by the responding contractor and cannot be accepted by the Government to form a binding contract.
