Inactive Total Small Business Set-Aside (FAR 19.5)

HOSE ASSEMBLY, STEAM, 2" 2" INSIDE DIAMETER x 2.625" OUTSIDE DIAMETER x 25 FEET LONG* (+/- 12" length tolerance prior to attachment of end fittings) • TEMPERATURE RATING TO BE 450 DEGREE FAHRENHEIT • ... HOSE ASSEMBLY, STEAM, 2" 2" INSIDE DIAMETER x 2.625" OUTSIDE DIAMETER x 25 FEET LONG* (+/- 12" length tolerance prior to attachment of end fittings) • TEMPERATURE RATING TO BE 450 DEGREE FAHRENHEIT • MINIMUM OPERATING PRESSURE TO BE 250.0 POUNDS PER SQ. INCH • BURST TEST PRESSURE TO BE 2500.0 POUNDS PER SQ. INCH • INNER CONVEYING TUBE MATERIAL TO BE EITHER BUTYL, CHLOROBUTYL, BROMOBUTYL, OR ETHYLENE-PROPYLENE-DIENE-TERPOLYMER. • INSIDE SURFACE CONDITION TO BE SMOOTH • OUTER COVERING ENVIRONMENTAL PROTECTION TO BE ABRASION, OZONE AND STEAM RESISTANT • FIRST LAYER TO BE BRAIDED STEEL WIRE • SECOND LAYER TO BE MOLDED RUBBER • THIRD LAYER TO BE BRAIDED STEEL WIRE • OUTER LAYER TO BE MOLDED RUBBER 2 • STAINLESS STEEL LINER TO BE 1.75" INSIDE DIAMETER x 0.015" THICK. THE METAL LINER SHALL BE TYPE 302, 304, 316, OR 321 STAINLESS STEEL. • STAINLESS STEEL LINER TO BE PERMINENTLY/MECHANICALLY ATTACHED TO HOSE END FITTINGS • EACH ASSEMBLY TO BE COUPLED, MALE x FEMALE BOSS AND SPUD WITH POLYMER SEAT. MALE BOSS AND POLYMER SPUD TO BE PERMANENTLY ASSEMBLED AND READY FOR USE. MALE END WILL BE A MNPT X HOSE STEM WITH A FEMALE SPUD ON THE END (DIXON MS26 AND B28). THE FEMALE END WILL BE A STEM WITH WING NUT (DIXON GB26 AND B27) • EACH COMPLETED HOSE ASSEMBLY SHALL BE HYDROSTATICALLY TESTED TO 250 PSI AND HELD FOR 10 MINUTES WITH ZERO LEAKS AND/OR BULGES ALLOWED. • SUPPLIER MUST PROVIDE WRITTEN CERTIFICATION THAT HOSE ASSEMBLIES (HOSE AND FITTINGS) HAVE BEEN HYDROSTATICALLY TESTED TO 250 P.S.I. FOR 10 MINUTES WITH ZERO LEAKS AND/OR BULGES. A COPY OF THIS CERTIFICATION IS TO BE SENT TO CODE 135, BUILDING 276, AND A COPY IS TO BE SENT TO CODE 532 TO BE FILED WITH THE CONTRACT. • AT NO COST TO THE GOVERNMENT, NORFOLK NAVAL SHIPYARD RESERVES THE RIGHT TO REQUEST A SAMPLE ASSEMBLY FOR TESTING AND EVALUATION PURPOSES FROM ANY OR ALL OFFERORS DURING THE EVALUATION PROCESS. • EACH HOSE ASSEMBLY SHALL BE PERMANENTLY MARKED, AT A MINIMUM, WITH REQUISITION NUMBER, WORKING PRESSURE AND MANUFACTURER'S NAME. ATTACHING TAGS ARE NOT ACCEPTABLE • HOSES MUST BE PALLETIZED

Inactive Total Small Business Set-Aside (FAR 19.5)

SYNOPSIS: The Defense Logistics Agency (DLA) Maritime Norfolk at Norfolk Naval Shipyard (NNSY) intends to award a Firm Fixed Price (FFP) Single Award Contract for the items listed below. The required ... SYNOPSIS: The Defense Logistics Agency (DLA) Maritime Norfolk at Norfolk Naval Shipyard (NNSY) intends to award a Firm Fixed Price (FFP) Single Award Contract for the items listed below. The required items are for commercial items prepared in accordance with the information in FAR Part 13 and FAR Subpart 12.6, as supplemented with the additional information included in this notice. The Contract Line Items (CLINs) are as follows: CLIN 0001- HOSE ASSEMBLY, STEAM, 2" COPY OF CERTIFICATION REQUIRED ORDERING DATA: • 2" INSIDE DIAMETER x 2.625" OUTSIDE DIAMETER x 25 FEET LONG* (+/- 12" length tolerance prior to attachment of end fittings) • TEMPERATURE RATING TO BE 450 DEGREE FAHRENHEIT • MINIMUM OPERATING PRESSURE TO BE 250.0 POUNDS PER SQ. INCH • BURST TEST PRESSURE TO BE 2500.0 POUNDS PER SQ. INCH • INNER CONVEYING TUBE MATERIAL TO BE EITHER BUTYL, CHLOROBUTYL, BROMOBUTYL, OR ETHYLENE-PROPYLENE-DIENE-TERPOLYMER. • INSIDE SURFACE CONDITION TO BE SMOOTH • OUTER COVERING ENVIRONMENTAL PROTECTION TO BE ABRASION, OZONE AND STEAM RESISTANT • FIRST LAYER TO BE BRAIDED STEEL WIRE • SECOND LAYER TO BE MOLDED RUBBER • THIRD LAYER TO BE BRAIDED STEEL WIRE • OUTER LAYER TO BE MOLDED RUBBER • STAINLESS STEEL LINER TO BE 1.75" INSIDE DIAMETER x 0.015" THICK. THE METAL LINER SHALL BE TYPE 302, 304, 316, OR 321 STAINLESS STEEL. • STAINLESS STEEL LINER TO BE PERMINENTLY/MECHANICALLY ATTACHED TO HOSE END FITTINGS • EACH ASSEMBLY TO BE COUPLED, MALE x FEMALE BOSS AND SPUD WITH POLYMER SEAT. MALE BOSS AND POLYMER SPUD TO BE PERMANENTLY ASSEMBLED AND READY FOR USE. MALE END WILL BE A MNPT X HOSE STEM WITH A FEMALE SPUD ON THE END (DIXON MS26 AND B28). THE FEMALE END WILL BE A STEM WITH WING NUT (DIXON GB26 AND B27) • EACH COMPLETED HOSE ASSEMBLY SHALL BE HYDROSTATICALLY TESTED TO 250 PSI AND HELD FOR 10 MINUTES WITH ZERO LEAKS AND/OR BULGES ALLOWED. • SUPPLIER MUST PROVIDE WRITTEN CERTIFICATION THAT HOSE ASSEMBLIES (HOSE AND FITTINGS) HAVE BEEN HYDROSTATICALLY TESTED TO 250 P.S.I. FOR 10 MINUTES WITH ZERO LEAKS AND/OR BULGES. A COPY OF THIS CERTIFICATION IS TO BE SENT TO CODE 135, BUILDING 276, AND A COPY IS TO BE SENT TO CODE 532 TO BE FILED WITH THE CONTRACT. • AT NO COST TO THE GOVERNMENT, NORFOLK NAVAL SHIPYARD RESERVES THE RIGHT TO REQUEST A SAMPLE ASSEMBLY FOR TESTING AND EVALUATION PURPOSES FROM ANY OR ALL OFFERORS DURING THE EVALUATION PROCESS. • EACH HOSE ASSEMBLY SHALL BE PERMANENTLY MARKED, AT A MINIMUM, WITH REQUISITION NUMBER, WORKING PRESSURE AND MANUFACTURER'S NAME. ATTACHING TAGS ARE NOT ACCEPTABLE • HOSES MUST BE PALLETIZED The requirement will be solicited as a total small business set aside. The NAICS code applicable to this procurement is 326220, Rubber and Plastics Hoses and Belting Manufacturing with a size standard of 500. The Product Service Code is 4720, Rubber and Plastics Hoses and Belting Manufacturing. The anticipated delivery date for this acquisition is 30 days after contract award. The solicitation, any documents related to this procurement, and all amendments issued will be in electronic form only. THE SOLICITATION IS NOT YET AVAILABLE. The solicitation number is SPMYM123Q0008, and it is expected to be available on or about 09 NOVENBER 2023 and posted to SAM.gov, https://sam.gov/ Quotes will be due by 1:00 PM EST on 21 NOVEMBER 2023. Responses to the solicitation notice shall be emailed to the attention of Sheree McDonnell at sheree.mcdonnell@dla/mil. Please make sure that the solicitation number (SPMYM123Q0008) is included in the subject line of any email correspondence. Emails without subject lines will not be read because of security issues. Potential offerors are hereby notified that the solicitation and any subsequent amendments will only be available by downloading the documents at www.SAM.gov (Contracting Opportunities). The Government is not responsible for inability of the Offeror's to access solicitation documents posted. No telephone or FAX requests will be accepted, and no hardcopy solicitation/amendment will be mailed or faxed. All responsible sources may submit a proposal which may be considered by the Government. By submitting a quote, the offeror will be self-certifying that neither the principal corporate officials nor owners are currently suspended, debarred, or otherwise ineligible to receive contracts from any federal agency. Failure to do so may represent grounds for refusing to accept the proposal. By submission of a proposal, the offeror acknowledges the requirement that a prospective awardee must be registered in the System for Award Management (SAM) database prior to award, during performance, and through final payment of any contract resulting from the solicitation, except for awards to foreign vendors for work to be performed outside the United States. Lack of registration in the SAM database will make an offeror ineligible for award. Offerors may obtain information on registration and annual confirmation requirements by calling 1-866-606-8220, or via the Internet at https://www.sam.gov. All questions shall be submitted in accordance with the solicitation, dates, and procedures. Please direct all questions regarding this requirement to Sheree McDonnell at sheree.mcdonnell@dla/mil..