Inactive 8(a) Set-Aside (FAR 19.8)

This Project involves: Contractor shall demolish 69 pole mounted 1500-watt metal halide light fixtures and the mounting hardware. All electrical junction boxes at the top of the light pole shall be de... This Project involves: Contractor shall demolish 69 pole mounted 1500-watt metal halide light fixtures and the mounting hardware. All electrical junction boxes at the top of the light pole shall be demolished and replaced if not in good useable condition. Contractor shall replace all cross members and mounting hardware that are not safe and usable to support the new light fixtures. Contractor shall demolish existing start/stop switch on outside of enclosure #1. Contractor shall provide and install new start/stop switch to properly control lighting contactor. Contractor shall demolish existing timed relay and terminal block that is currently inside enclosure #1. Contractor shall provide and install 69 new LED equivalent to existing light fixtures and hardware. Contractor shall provide and install new electrical junction boxes at top of pole if not in good usable condition. Contractor shall provide and install new on/off switch on outside of enclosure #1, new terminal block and timed relay mounted inside enclosure. These components shall be rewired to energize existing lighting contactor for a complete, usable and finished product. Timing function shall be off delay with adjustable timing range of 0.1-10.0 HRS. Contractor shall demolish enclosure #2 and all electrical components inside. Contractor shall provide and install new enclosure and all electrical components to control existing light poles for a complete, usable and finished product. New on/off switch shall be located on outside of enclosure #2. ONLY CONTRACTORS ON THIS MACC CAN SUBMIT A PROPOSAL.