Inactive
Notice ID:N4008522R2691
THIS IS A SOURCES SOUGHT NOTICE ONLY. THIS IS NOT A REQUEST FOR PROPOSAL. THERE WILL NOT BE A SOLICITATION, SPECIFICATIONS, OR DRAWINGS AVAILABLE AT THIS TIME. This notice does NOT constitute a reques...
THIS IS A SOURCES SOUGHT NOTICE ONLY. THIS IS NOT A REQUEST FOR PROPOSAL. THERE WILL NOT BE A SOLICITATION, SPECIFICATIONS, OR DRAWINGS AVAILABLE AT THIS TIME. This notice does NOT constitute a request for proposal, request for quote, or invitation for bid. The intent of this notice is to conduct market. Naval Facilities Engineering Command, Mid-Atlantic is seeking eligible small business firms capable of performing construction services for design-bid-build - Construction of P828 NSGL Smart Energy, Great Lakes, Illinios. All service-disabled veteran-owned small businesses (SDVOSB), certified HUB-Zone, certified 8(a), women-owned small businesses (WOSB), and small businesses are encouraged to respond. Upon review of industry response to this sources sought notice, the Government will determine whether set-aside procurement in lieu of full and open competition is in the Government’s best interest. Large business submittals will not be considered. The Government is not obligated to and will not pay for any information received from potential sources as a result of this synopsis. The information provided in this notice is subject to change and in no way binds the Government to solicit for or award a contract. The Government will not provide debriefs on the results of this research, but feedback regarding the decision to set aside or not set aside the procurement will be accomplished via pre-solicitation synopsis or solicitation for these services, as applicable. All information submitted will be held in a confidential manner and will only be used for the purpose intended. Description of work: This project creates an Installation ICS Operations Center as well as install a new Installation-wide (at NAVSTA Great Lakes) ICS network consisting of a high bandwidth backbone switching, network, and distribution fiber to connect building and Installation SCADA assets to the communications backbone and build an integrated ICS network. The project will focus on 17 buildings Eleven (11) of the 17 buildings will undergo work as hub facilities in order to accommodate the fiber backbone and distribution networks as necessary. eROI score is 1.6 and SIR score is 1.4. The project can be broken down into the following five (5) key components. Control Center - Renovating 400-500 SF (maximum 1384 SF) in Building 68 at NAVSTA Great Lakes to serve as an integrated industrial control system (ICS) control center for ICS operators, and ICS data center, and a data analysis center for NAVSTA Great Lakes. Stand-alone ICS (such as SCADA, DDC, and AMI) will be fully integrated and collocated allowing seamless monitoring and operations of the utility and facility energy systems using a common communications network. Access to the new ICS network will be provided in the Regional Operating Center (ROC) allowing access of key building and utility systems in the event of a base or regional emergency. Backbone Fiber Network - Install approximately 38,000 LF of overhead (on existing utility poles)of new Installation-wide ICS network consisting of high bandwidth backbone switching and network fiber ring. Distribution Fiber - Install approximately 43,000 LF of underground fiber lines (in existing ducts)to connect building and Installation SCADA assets and newly commissioned AMI metering to the communications fiber network as necessary. Retro-commissioning (RCx) - Conduct retro commissioning in one facility (building 1506) totaling approximately 27,500 GSF). Direct Digital Control (DDC) System Network Connectivity - Install network control panels and connect the existing DDC system in the buildings to the site-wide ICS network backbone. This will provide necessary network connectivity to the DDC system server in Building 68 for remote control and monitoring capabilities and more efficient utilization of existing DDC system. The existing DDC system in the buildings are primarily being used for HVAC systems (6 buildings (190, 236, 3540, 7101/02, 7111/12 and 7260). Direct Digital Control (DDC) System Replacement – Replace the existing DDC system with new in one (1) of the 17 buildings, Building 1506. The existing system in Building 1506 is obsolete, legacy Siemens product with some pneumatically operated end devices. The new DDC system will be the latest version of Siemens product and will be connected to and integrated into the DDC system server in Building 68. This will provide remote control and monitoring capabilities and allow the existing HVAC system operate more efficiently (Building 1506, approximately 27,500 GSF). Supervisory Control and Data Acquisition (SCADA) system Network Connectivity - Install network control panels and connect the existing SCADA system in the buildings to the site-wide ICS network backbone. This will provide necessary network connectivity to the SCADA system server in Building 11 for remote control and monitoring capabilities and more efficient utilization of existing SCADA system. The existing SCADA system in the buildings are primarily being used for water treatment and distribution, water storage tank and power distribution throughout the installation (9 buildings (A450, F10, R20, 1912, 2018, 3114A, 3303, 7811 and VA Tank). The appropriate Northern American Industry Classification System (NAICS) code for this procurement is 236220 – Commercial and Institutional Building Construction, with a size standard of $36,500,000. In accordance with FAR 36.0204(g), the magnitude of construction for this project is between $5,000,000 and $10,000,000. If the resulting solicitation is set aside for small businesses firms, it will include FAR clause 52.219-14, Limitations on Subcontracting, which states, “The concern will perform at least 15 percent of the cost of the contract, not including the cost of materials, with its own employees.” This office anticipates award of a contract for these services around September 2022. Interested sources are invited to respond to this sources sought announcement by using the forms provided under separate files titled Sources Sought Contractor Information Form (form attached) and Project Data Form (form attached). These forms are required. Information not provided may prohibit your firm from consideration. If you are submitting as a mentor-protégé joint venture under the 8(a) program, you must provide SBA approval of the mentor-protégé agreement to be considered as small for this procurement. For more information on the definitions or requirements for these small business programs refer to http://www.sba.gov/. Responses must include identification and verification of the firm’s small business status. For each of the submitted relevant projects (a maximum of five projects), ensure that the form is completed in its entirety for each project and limited to two page per project. Ensure that the description of the project clearly identifies whether the project is new construction or renovation, the square footage and final construction cost, and addresses how the project meets the scope/complexity requirements. Submit a minimum of three (3) and a maximum of five (5) relevant construction projects completed within the last 7 years for your firm that best demonstrate your experience on projects that are similar in size, scope, and complexity to this project. Relevancy is further defined as: Size: Final Construction Cost for Electrical-related work of at least $3,000,000 for a facility that is at least 2,000 sq. ft. Scope/Complexity: - New Construction or Renovation of a facility to include installation or repair of related electrical work (e.g. Industrial Control System, SCADA, DDC, AMI, installation of fiber underground fiber lines, network control panels, etc.) Ensure that the project description clearly identifies whether the project is new construction or renovation, provides the square footage and final electrical work related cost, and addresses how the project meets the scope/complexity requirements. This notice is a market research tool being used to determine the availability and adequacy of potential small business sources prior to determining the method of acquisition and ultimate issuance of a solicitation. Upon review of industry response to this sources sought notice, the Government will determine whether set-aside procurement in lieu of full and open competition is in the Government’s best interest. Large business submittals will not be considered. The Government is not obligated to and will not pay for any information received from potential sources as a result of this notice. The information provided in this notice is subject to change and in no way binds the Government to solicit for or award a contract. The Government will not provide debriefs on the results of this research, but feedback regarding the decision to set aside or not set aside the procurement will be accomplished via pre-solicitation synopsis or solicitation for these services, as applicable. All information submitted will be held in a confidential manner and will only be used for the purpose intended. Points of contact listed may be contacted for the purpose of verifying performance. Interested parties should respond no later than 9 May 2022 by 1400 local time. The submission package shall ONLY be submitted electronically to Michelle Corsino via email at michelle.a.corsino.civ@us.navy.mil. Packages shall not exceed 15 pages and MUST be limited to a 4MB attachment. You are encouraged to request a "read receipt." Responses received after the deadline or without the required information will not be considered.
