Inactive Total Small Business Set-Aside (FAR 19.5)

This solicitation is a small business set aside for a single award IDIQ contract for Regional Lead, Asbestos, Toxic Characteristic Leaching Procedure (TCLP), and Polychlorinated Biphenyls (PCB) Sampli... This solicitation is a small business set aside for a single award IDIQ contract for Regional Lead, Asbestos, Toxic Characteristic Leaching Procedure (TCLP), and Polychlorinated Biphenyls (PCB) Sampling, Field Testing, Laboratory Services, and Oil and Hazardous Substance Spill Containment.

Inactive Total Small Business Set-Aside (FAR 19.5)

PRESOLICITATION SYNOPSIS FOR SOLICITATION N40085-22-R-2635 This is not a request for either a quote or proposal, or an invitation to bid. The intent of this pre-solicitation synopsis is to notify pote... PRESOLICITATION SYNOPSIS FOR SOLICITATION N40085-22-R-2635 This is not a request for either a quote or proposal, or an invitation to bid. The intent of this pre-solicitation synopsis is to notify potential offerors of a Facility Support, Indefinite Delivery / Indefinite Quantity contract with non-recurring services only to provide Facility Investment and Facilities Management services for Regional Lead, Asbestos, TCLP and PCB Sampling and Testing for the Hampton Roads, Virginia Area General Work Requirements: The Contractor shall furnish all labor, supervision, management, tools, materials, equipment, facilities, transportation, incidental engineering and other items necessary to provide the following: Regional Lead, Asbestos, Toxic Characteristic Leaching Procedure (TCLP), and Polychlorinated Biphenyls (PCB) Sampling, Field Testing and Laboratory Services and Oil and Hazardous Substance Spill Containment. The work is identified as a Facility Support, Indefinite Delivery / Indefinite Quantity Performance-Based contract with non-recurring services only. Source Selection procedures will be used to select the proposal that provides the lowest price and is technically acceptable to the Government. Offerors will be evaluated using the Lowest Priced Technically Acceptable (LPTA) Method. In order to permit efficient competition, the Navy will utilize the following methodology: Proposals will initially be screened for price and placed in order of price (lowest price to highest price). The Navy will then evaluate the technical factors of the lowest priced proposal. The Navy will make award to the lowest priced technically acceptable proposal. However, if the lowest priced proposal is not found to be technically acceptable, the Navy at its sole discretion, reserves the right to increase the number of proposals it will review, until the Government identifies a technical acceptable proposal. Accordingly, under this methodology, the technical factors of some proposals may not be evaluated by the Navy. If discussions are deemed necessary by the Contracting Officer, all proposals will be evaluated (both non-price and price) for the purpose of establishing a competitive range. Proposers are advised that the Government intends to evaluate proposals and award without discussions or any contact concerning the proposals received. Therefore, proposals should be submitted initially on the most FAVORABLE terms. Proposers should not assume that they will be contacted or afforded an opportunity to qualify, discuss or revise their proposals. The solicitation and resulting contract award will be a performance-based service acquisition made to the responsible offeror whose proposal, conforming to the Request for Proposals (RFP), will be advantageous to the Government price and other evaluation factors considered. The offeror’s proposal shall contain a response to each of the evaluation factors and shall be in the form prescribed by the solicitation. The solicitation requires the evaluation of price and the following non-price factors: Factor 1 – Technical Approach/Management, Factor 2 – Corporate Experience, Factor 3 – Safety and Factor 4 – Past Performance. NOTE: Offerors MUST be evaluated as technically ACCEPTABLE under factors 1, 2, 3 and 4 in order to be considered technically acceptable overall. For Factor 2 Corporate Experience and Factor 4 Past Performance, the solicitation requires the offeror to submit projects that are similar in size, scope and complexity to the following: Size: Lead, Asbestos, Toxic Characteristic Leaching Procedure (TCLP), and Polychlorinated Biphenyls (PCB) Sampling Testing Services contract with a yearly value of at least $450,000.00 for nonrecurring services. If an Offeror intends to submit completed work issued off an Indefinite Quantity/Indefinite Delivery (IDIQ) contract as a qualifying Project, the Offeror is limited to submitting the IDIQ contract itself. The board will not consider or evaluate task orders whether submitted individually or collectively. Scope: Demonstrate the ability to provide all labor, supervision, management, tools, materials, equipment, facilities, transportation, incidental engineering Contractor must demonstrate the ability to provide all labor, management, supervision, tools, material, and equipment and other items necessary to provide Lead, Asbestos, Toxic Characteristic Leaching Procedure (TCLP), and Polychlorinated Biphenyls (PCB) Sampling, Field Testing and Laboratory Services and Oil and Hazardous Substance Spill Containment services as defined by the RFP. Complexity: Demonstrate the ability to respond simultaneously to requirements for various locations and buildings throughout the installation and supporting annexes. Demonstrate the ability to manage competing priorities in order to support customer demands. Offers shall be submitted for the performance of work for a period of one year. However, the initial term of the contract may be for a period of less than one year. The Government has the option to extend the term of the contract services for additional periods of one to twelve months. The contract will be for a base period with 4 one-year option periods, which, cumulatively, will not exceed sixty months. The proposed procurement will be issued as a NAVFAC Mid-Atlantic Electronic Facilities Support Contract with online ordering capability using FedMall for the Non-Recurring Exhibit Line Item Numbers (ELINs). Acceptance of Government Purchase Credit Cards is required along with the purchase of FedMall Encrypted software. The North American Classification System (NAICS) is 541380, the size standard is $16.5M. The proposed procurement listed herein is a Total Small Business Set-Aside procurement. The RFP will be made available in electronic format only (Adobe Acrobat (.pdf)) and will be posted on the SAM.gov website around 20 May 2022. The estimated proposal due date shall be at least 30 days after the RFP is posted. (Contractors - Technical inquiries must be submitted in writing to Matthew Collins, (matthew.a.collins51.civ@us.navy.mil ) 10 days prior to the RFP due date. The SAM site address is https://sam.gov. Notifications of any updates or amendments to the solicitation will be posted on the website only. Contractors are encouraged to register on the Beta SAM website. Only registered contractors will be notified by e-mail when amendments to the solicitation are issued. IT IS THE SOLE RESPONISBILITY OF THE OFFEROR TO CONTINUALLY VIEW THE WEBSITE FOR CHANGES. All prospective contractors are required to be registered in the System for Award Management (SAM) database (www.sam.gov), in accordance with FAR 52.204-7. Failure to have an active registration in the SAM database at time of proposal, bid or quotation submission will result in the contractor being ineligible for award. SAM registration shall be maintained until time of award, during performance and through final payment. Offerors and contractors may obtain information on registration and annual confirmation requirements via the Internet at https://www.sam.gov/.

Inactive

THIS IS A SOURCES SOUGHT NOTICE ONLY. This is not a request for proposal and no contract will be awarded from this notice. There will not be a solicitation, specifications, or drawings available at th... THIS IS A SOURCES SOUGHT NOTICE ONLY. This is not a request for proposal and no contract will be awarded from this notice. There will not be a solicitation, specifications, or drawings available at this time. This notice is a market research tool used for planning purposes only to determine the availability and capability of businesses. Naval Facilities Engineering Systems Command, (NAVFAC) Mid-Atlantic is seeking Small Business, Small Disadvantaged Business, Women Owned Small Business, Service-Disabled Veteran-Owned Small Business, certified HUBZone Small Business, and certified 8(a) Businesses with current relevant qualifications, experience, personnel and capability are encouraged to respond. Upon review of industry response to this Sources Sought Notice, the Government will determine whether a set-aside acquisition in lieu of full and open competition is in the best interest of the Government. A Facility Support, Indefinite Delivery/Indefinite Quantity (IDIQ) contract with non-recurring services is anticipated. The total contract term including the exercise of any options, shall not exceed 60 months. Source Selection procedures will be used to evaluate and select the proposal that is most advantageous to the Government. The Contractor shall furnish all labor, supervision, management, tools, materials, equipment, facilities, transportation, incidental engineering and other items necessary to provide Regional Lead, Asbestos, TCLP and PCB Sampling Testing at the following: Portsmouth Site including - Norfolk Naval Ship Yard, Portsmouth; Little Creek Site including - Naval Amphibious Base Little Creek, Norfolk; Sewells Point Site including – Naval Station and Chambers Field, Norfolk; Oceana Site including– Naval Air Station, Fleet Training Center Damn Neck and, Fentress Airfield, Virginia Beach; Peninsula Site including – Naval Weapons Station, Yorktown and Cheatham Annex, Williamsburg. Also included are various locations within a 50-mile radius of the above. General Work Requirements: The Contractor shall furnish all labor, supervision, management, tools, materials, equipment, facilities, transportation, incidental engineering and other items necessary to provide the following: Regional Lead, Asbestos, Toxic Characteristic Leaching Procedure (TCLP), and Polychlorinated Biphenyls (PCB) Sampling, Field Testing, Laboratory Services, and Oil and Hazardous Substance Spill Containment. All Small Business, Small Disadvantaged Business, Women Owned Small Business, Service-Disabled Veteran-Owned Small Business, certified HUBZone Small Business, and certified 8(a) Businesses are encouraged to respond. The Government will not pay for any information solicited. Respondents will not be notified of the results of the evaluation. All qualified firms are encouraged to respond. The appropriate NAICS Code is 541380, size standard $16.5 million. It is requested that interested parties submit a brief capabilities package not to exceed 5 pages. This capabilities package shall address, at a minimum the following: (1) Examples of projects worked within the last five years of similar size, scope and complexity as the work indicated. Knowledge of the state regulations within the AOR. Indicate whether your firm worked as a prime or subcontractor, contract value, brief description of how the referenced contract relates to the work described, and a Government / Agency point of contact. Size: Lead, Asbestos, Toxic Characteristic Leaching Procedure (TCLP), and Polychlorinated Biphenyls (PCB) Sampling Testing Services contract with a yearly value of at least $450,000.00 for recurring services. Indefinite Quantity/Indefinite Delivery values for non-recurring work will be considered. Scope: Demonstrate the ability to provide all labor, supervision, management, tools, materials, equipment, facilities, transportation, incidental engineering Contractor must demonstrate the ability to provide all labor, management, supervision, tools, material, and equipment and other items necessary to provide Lead, Asbestos, Toxic Characteristic Leaching Procedure (TCLP), and Polychlorinated Biphenyls (PCB) Sampling, Field Testing and Laboratory Services and Oil and Hazardous Substance Spill Containment services as defined by the RFP. Complexity: Demonstrate the ability to respond simultaneously to requirements for various locations and buildings throughout the installation and supporting annexes. Demonstrate the ability to manage competing priorities in order to support customer demands. (2) Company profile, to include number of offices and number of employees per office, annual receipts, office location(s), available bonding capacity, DUNS number, and CAGE Code. (3) Please indicate if you are a Small Business, Small Disadvantaged Business, Women Owned Small Business, Service-Disabled Veteran-Owned Small Business, certified HUBZone Small Business, and certified 8(a) Business. (4) In order to assist us in determining the geographic boundaries of the contract(s) necessary to cover the services of the proposed requirement within our AOR, please identify the geographic area in which you can operate in an efficient and economical manner. The capabilities package for this sources sought notice is not expected to be a proposal, but rather a short statement regarding the company’s ability to demonstrate existing, or developed, expertise and experience in relation to this contract. Any commercial brochures or currently existing marketing material may also be submitted with the capabilities package. Submission of a capabilities package is not a prerequisite to any potential future offerings, but participation will assist the Navy in tailoring requirements to be consistent with industry capabilities. Responses to this Sources Sought Notice shall be submitted electronically to matthew.a.collins1@navy.mil. Responses must be received no later than 2:00 PM Eastern Standard Time on 28 February 2022. Questions regarding this sources sought notice may be emailed to Matthew Collins at matthew.a.collins1@navy.mil, or via telephone at (757) 341-0090.