Inactive
Notice ID:N4008422T0404
The work includes, but is not limited to, all labor, management, supervision, tools, material, and equipment required to perform removal and replacement for NAVFAC FE owned Frequency Synchronous Conde...
The work includes, but is not limited to, all labor, management, supervision, tools, material, and equipment required to perform removal and replacement for NAVFAC FE owned Frequency Synchronous Condenser and related system components located at Building 3029 on Yokosuka Naval Base. The work shall be performed in accordance with OEM Standards and regulation. The Contractor shall replace the current Synchronous Condenser and its Control Panel plus all related auxiliary equipment with the new one. The new Synchronous Condenser and control panel shall have the same capacity as the current one, and Contractor shall ensure it is fully functional and in normal working condition. The OEM for Synchronous Condenser conducted an inspection of the current unit to determine the cause of problems that have rendered it inoperable. Items 1 and 2 below were identified during the inspection by the OEM and recommended replacement or overhaul repairs. The Government operator also has concerns about the related auxiliary equipment that were not part of the OEM’s inspection. When Synchronous Condenser, control panel and other related auxiliary equipment is replaced, or otherwise maintained, work must be performed in a manner compatible to Supervisory Control and Data Acquisition (SCADA) system functionality. Existing SCADA system is Toshiba. General scope of work*: 1. Replacement of Synchronous Condenser: Remove the current Ideal Electric Synchronous Condenser model GV60K25B, related capacity (15000KVA, 0.02PF, 900RPM, 3P, 60HZ, 13,200V), Serial #63GIS11. Replace this Synchronous Condenser above with a new one. The new Synchronous Condenser shall be the same capacity as the existing one The new Synchronous Condenser shall be compatible to Supervisory Control and Data Acquisition (SCADA) system functionality. Existing SCADA system is Toshiba 2. Replacement Work for Synchronous Condenser Control panel: Remove the current Ideal Electric Synchronous Condenser Control panel composed of parts made by Ideal Electric and EATON Inverter panel (Serial number: 071009-04 &5). Replace the Synchronous Condenser Control Panel with the new one. The new Control panel shall be same and compatible to the new Synchronous Condenser. The new Synchronous Condenser Control panel shall be compatible to Supervisory Control and Data Acquisition (SCADA) system functionality. Existing SCADA system is Toshiba. *This list is not all-inclusive and may or may not include additional work by the Contractor. The North American Industry Classification System (NAICS) is 237130, Power and Communication Line and Related Structures Construction. This U.S. industry comprises establishments primarily engaged in repairing and maintaining (without retailing) electronic and precision equipment (except consumer electronics, computers and office machines, and communications equipment). Establishments in this industry repair and maintain equipment, such as primarily related to power and communication line and related structures construction. A Firm Fixed-Price (FFP) type contract is anticipated. The work shall be completed within 700 calendar days after the date of award. General Information for Synchronous Condenser (SC) unit is as follows: SC was manufactured in 2008 (14 years old). Converting Frequency: 50Hz to 60Hz. Voltage Conversion: 6.6KV to 13.2KV. OEM: Ideal Electric Company Model: GV-60K25B Related Capacity: 72KV/800A/25KA Serial Number: #63GIS11 Equipment SN: 071009-01 This SC is compatible to Toshiba SCADA system General Information for Synchronous Condenser Control panel system related equipment units are as follows: The Control panel was manufactured in 2008 (14 years old) OEM: Ideal Electric Company and Eaton Serial Number: 071009-04 &5 This Control panel is compatible to Toshiba SCADA system.
