Inactive Total Small Business Set-Aside (FAR 19.5)

Requirements: ALL BIDS MUST BE SUBMITTED THROUGH THE ATTACHED PDF TO THE LISTED CONTACT Bid submittals will include the make and model of the machine being quoted, a checklist of each item in the unit... Requirements: ALL BIDS MUST BE SUBMITTED THROUGH THE ATTACHED PDF TO THE LISTED CONTACT Bid submittals will include the make and model of the machine being quoted, a checklist of each item in the unit specifications section below denoting whether the unit meets the requirement, and the actual dimension for any item with a specific measurement requirement. If supporting information includes multiple models, the vendor shall clearly state the model number of proposed unit and redact all information not applicable to proposed unit. Unit Specifications: Capacity/type: 5.5K# to 8K# IC, Pneumatic, Counterbalanced, Rider Power type: Diesel Shall be no older than 5 years Minimum lift height: 120” Max collapsed height: 96” Max outside turning radius: 90” Forks: 42” - 48” long forks, not to exceed 2” thickness or 5” width Pneumatic or solid pneumatic tires Cab enclosure or rain canopy A minimum of one air circulating fan will be installed in enclosed cabs if air-conditioning is not included. The carriage will be equipped with side-shift. Hydraulic fork positioners are preferred, but not required. Light package to include a minimum of front and rear working lights. Unit will be equipped with an audible backup alarm. Will have manufacturer’s capacity data plate containing safe working load and maximum reach height at a minimum. Safe working load and forklift weight will be clearly labeled in view of operator, normally on the mast crossbar or uprights, using the largest lettering size that fits (Labeling tape is acceptable) Operator controls shall be properly and clearly marked An operator’s manual will be in the machine