Inactive

Military Sealift Command Combined Synopsis and Solicitation Notice Information 1. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12... Military Sealift Command Combined Synopsis and Solicitation Notice Information 1. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotations are being requested and a written solicitation will not be issued. 2. Solicitation number is N3220523Q0009 and is being issued as a Request for Quotes (RFQ). 3. The solicitation document and incorporated provisions and clauses are those in effect through: a. Federal Acquisition Circular (FAC) 2022-08, effective 10/28/2022, located on https://www.acquisition.gov/browse/index/far b. DFARS Publication Notice 20221028, effective 10/28/2022 located at https://www.acq.osd.mil/dpap/dars/dfarspgi/current/ 4. The associated NAICS code is 333912 and the associated PSC/FSC code is 2090 for this procurement: NOTE: A Class Waiver is not applicable to a procurement unless the NAICS code, PSC/FSC, and NAICS Code Descriptor currently in effect, match the item(s) being procured. 1 is not being set-aside for small businesses. 0 is being set-aside for small business. The small business size standard is 1000. 5. The table below lists the Contract Line Item Number(s) (CLIN(s)) and items, quantities and units of measure, inclusive of any applicable options: CLIN DESCRIPTION QUANTITY UNIT OF MEASURE 0001 Sperre, DRIVE COUPLING, Part Number: 1374-42 3 EA 0002 Sperre, DRIVE COUPLING, Part Number 1376-42 4 EA 0003 Sperre, GAGE, Part Number 1481 6 EA 0004 Sperre, CYLINDER, HP, Part Number 1532MK 6 EA 0005 Sperre, CYLINDER, LP, Part Number 1538MK 6 EA 0006 Sperre, CYLINDER HEAD LP, Part Number 1651 2 EA 0007 Sperre, CYLINDER HEAD HP, Part Number 1653 2 EA 0008 Sperre, DRIVEN COUPLING, COMPRESSOR, Part Number 1983 4 EA 0009 Sperre, VALVE, Part Number 3038 12 EA 0010 Sperre, VALVE OPENER, COMPLETE, Part Number 3245 6 EA 0011 Sperre, GUIDE RING HP 77-1-5, Part Number 3298 16 EA 0012 Sperre, GUIDE RING LP 140-160, Part Number 3300 16 EA 0013 Sperre, MAIN SWITCH 40A 3P SMALL, Part Number 66110 2 EA 0014 Sperre, FLEXTUBE VENTILATOR KIT, Part Number 3565 6 EA 0015 Sperre, VALVE GASKET KIT, LP, Part Number 3567 12 EA 0016 Sperre, VALVE GASKET KIT, HP, Part Number 3569 12 EA 0017 Sperre, SOLENOID DRAIN VALVE KIT, Part Number 3578 6 EA 0018 Sperre, VALVE KIT LP, Part Number 3597 12 EA 0019 Sperre, VALVE KIT HP, Part Number 3598 12 EA 0020 Sperre, INSPECTION GLASS, Part Number 3634 8 EA 0021 Sperre, INTERCOOLER, COMPLETE, Part Number 3659 3 EA 0022 Sperre, AFTER COOLER, COMPLETE, Part Number 3660 3 EA 0023 Sperre, AIR COOLER, COMPLETE, Part Number 3661 3 EA 0024 Sperre, AIR COOLER, COMPLETE, Part Number 3664 3 EA 0025 Sperre, AIR FILTER HL/LL77A-105A, Part Number 3672 4 EA 0026 Sperre, BREATHER VALVE 85-300, Part Number 3700 12 EA 0027 Sperre, AIR FILTER 120-160, 200-219, Part Number 3715 24 EA 0028 Sperre, AIR FILTER, INSERT HL2/77-105A, Part Number 3720 24 EA 0029 Sperre, PRESSURE GAGE 6 BAR + MPA, Part Number 3770 6 EA 0030 Sperre, PRESSURE GAGE 0-10 BAR, Part Number 3771 6 EA 0031 Sperre, PRESSURE GAGE 0-16 BAT, Part Number 3772 6 EA 0032 Sperre, PRESSURE GAGE, HP 0-60 BAR, Part Number 3773 6 EA 0033 Sperre, VALVE GASKET, Part Number 3916 32 EA 0034 Sperre, VALVE GASKET, Part Number 3917 32 EA 0035 Sperre, GASKETS, Part Number 4077 12 EA 0036 Sperre, GASKETS, Part Number 4100 8 EA 0037 Sperre, SOLENOID DRAIN VALVE, Part Number 9710 6 EA 0038 Sperre, OIL LEVEL SWITCH, Part Number 4356 10 EA 0039 Sperre, SAFETY VALVE, HP, Part Number, 4420 6 EA 0040 Sperre, SAFETY VALVE, Part Number 4421 10 EA 0041 Sperre, NON RETURN VALVE, Part Number 4491 6 EA 0042 Sperre, FLEXIBLE COUPLING INSERT, Part Number 4515 3 EA 0043 Sperre, COUPLING INSERT, COMPLETE, Part Number 4516 4 EA 0044 Sperre, VIBRATION DAMPER, Part Number 4546 12 EA 0045 Sperre, VIBRATION DAMPER, Part Number 4606 12 EA 0046 Sperre, FERREL, Part Number 7881 6 EA 0047 Sperre, NUT, Part Number 7883 6 EA 0048 Sperre, FERREL, Part Number 7885 6 EA 0049 Sperre, LP KIT OVERHAUL, Part Number 7919 16 EA 0050 Sperre, OVERHAUL KIT 5,000 Part Number 7930 6 EA 0051 Sperre, OVERHAUL KIT 10,000 Part Number 7960 3 EA 0052 Sperre, OVERHAUL KIT HL2/105A Part Number 7989 6 EA 0053 Sperre, OVERHAUL KIT HL2/105A Part Number 7992 3 EA 0054 Sperre, SAFETY VALVE, HP, Part Number, 40642 6 EA 0055 Sperre, VALVE KITS 3038MK2, Part Number 3038MK2 16 EA 0056 Sperre, SPHERRE HMI 7" LCD DISPLAY, Part Number 67031-A-RS 2 EA 0057 Sperre, EMERGENCY START SWITCH, Part Number 67060 2 EA 0058 Sperre, EMERGENCY STOP BUTTON, Part Number 67040 2 EA Wood Packaging / DOD unique identification / Shipping Not separately priced Service air compressors Sperre HL2/105A. Serial numbers: STBD OUTBOARD - 106840 STBD INBOARD - 106841 PORT OUTBOARD - 106839 PORT INBOARD - 106838 STEERING OUTBOARD - 106848 STEERING INBOARD – 106849 Service air compressors Sperre LL2/120 Serial numbers: STBD - 125214 PORT - 125230 FWD - 125229 6. It is anticipated one firm-fixed price purchase order will be issued in response to this RFQ. No commercial financing. Sperre Air Power AS Original Equipment Manufacturer (OEM) parts are required for the Start Air Compressor. Any offer for other than OEM parts will not be considered. 7. The required delivery is FOB Destination and acceptance date is 15 January 2022. Delivery and acceptance will occur at MSC BATS San Diego, 9284 Balboa Ave. San Diego, CA 92123. 8. The provision at FAR 52.212-1, Instructions to Offerors – Commercial applies to this acquisition and is incorporated by reference. The provision is amended as follows: 52.212-1 (ADDENDUM) ADDITIONAL INSTRUCTIONS TO OFFERORS--COMMERCIAL ITEMS a. Any inconsistency between FAR Provision 52.212-1 and the Addendum to FAR 52.212-1 shall be solved by giving precedence to the Addendum to FAR 52.212-1. b. After receipt of quotes the Government may, with or without notice, negotiate with and, if desired, seek quote revisions from as many or as few quoters as it, in its discretion, deems appropriate. c. The term “offeror” or “offer” as used in FAR 52.212-1 shall be understood to mean “quoter” and “quote,” respectively. Further, the term “award” shall be understood to describe the Government’s issuance of an order. d. The Government will consider all quotes that are timely received and may consider late quotes in accordance with 52.212-1. Failure of a quote to address any items listed in the attached submission package may make a quote unacceptable. e. Paragraph (b) of FAR Provision 52.212-1, Submission of Offers, is amended as follows: In addition to the quote submission requirements stated in FAR provision 52.212-1, quoters shall provide the following, as part of the quote submission package, no later than the required time and date for quote submission: Responsible sources shall provide the following: 1. Price quote which identifies the requested item(s), unit price inclusive of shipping (if any), and extended price 2. Total Firm Fixed price 3. Any Discount Terms 4. Estimated time of delivery 5. Technical Submission Requirements a. For Parts/Supply buy, the quote shall contain a description including part number and title for each item listed in the solicitation to allow the Government to verify that the quoted parts match the requirements listed in the requirements schedule. b. For a Services buy, the quote shall contain all pre-award submission/certification requirements as defined in the statement of work (SOW). 6. Indicate principal place of performance and country of product origin. 7. Responses to the solicitation are due 07 December 2022 at 2:00 pm Easter Standard Time. Quotes may be e-mailed to Samuel.n.queen2civ@us.navy.mil. To be considered timely, an E-mail quote must be received in its entirety in the designated E-mail inbox by the due date and time for quote submission. Quotes received after that time will be considered at the Government’s sole discretion. Please reference the solicitation number on your quote. Primary Point of Contact: Samuel.n.queen2civ@us.navy.mil Secondary Point of Contact:

Inactive

THIS IS A SOURCES SOUGHT NOTICE ONLY. This is not a solicitation of Request for Quote/Proposal/Bid and no contract or purchase order will be awarded as a result of this notice. There is no solicitatio... THIS IS A SOURCES SOUGHT NOTICE ONLY. This is not a solicitation of Request for Quote/Proposal/Bid and no contract or purchase order will be awarded as a result of this notice. There is no solicitation, specifications, or drawings available at this time. The Government is not obligated to and will not pay for any information received from potential sources as a result of this synopsis. The Military Sealift Command has a requirement for authorized original equipment manufacturer Sperre Air Power AS brand name parts on the Air Compressor Parts on board Expeditionary Mobile Base USNS JOHN L. CANLEY (T-ESB 6) Class of MSC vessels. MSC has identified Sperre Air Power AS as a known source that have parts compatible with the existing Sperre Air Power AS. The Air Compressor Parts in meeting MSC identified requirements including maintaining functionality, performance, and any existing warranty on the units. Respondents shall provide a full description of their capability to meet the anticipated requirement including other possible solutions. Feedback on this requirement is encouraged. The delivery of the material will be MSC SSU BATS, 9284 Balboa Ave, San Diego, CA, 92123 on January 01, 2023. All Small businesses, Service-Disabled Veteran-Owned Small Business, Certified HUBZone and Certified Section 8(a) Small Businesses are encouraged to respond. The Government will determine whether a set-aside acquisition in lieu of full and open competition in the Government’s best interest. The NAICS code for this procurement is 333912 Air and Gas Compressor Manufacturing which has a size standard of 1,000 employees. This is a market research tool used to determine market capability and solutions as well as the availability and adequacy of potential small business sources prior to determining the method of acquisition and issuance of award. The Government is not obligated to and will not pay for any information received from potential sources as a result of the sources sought. Is it requested that the interested firms submit to MSC-Norfolk contracting office a brief capabilities package demonstrating ability to provide the requested items or alternative solutions. This document shall address, at a minimum the following: (1) Company Profile to include number of employees, office location(s), DUNS number, CAGE code, and a statement regarding small business designation and status; (2) The solution proposed, including product literature; (3) Lead time for delivery of the solution(s); (4) Any suggestions or comments about the NAICS code selection, contract type, or effort in general. Submission of a capabilities statement is not a prerequisite to any potential future offerings, but participation will assist the Government in tailoring requirement to be consistent with industry. Submission of a capabilities statement is not a prerequisite to any potential future offerings, but participation will assist the Government in tailoring requirement to be consistent with industry. RESPONSES ARE DUE on October 27, 2022 by 02:00 pm Norfolk, VA local time. Email submissions of the capabilities packages WILL be accepted, please submit to Samuel Queen at samuel.n.queen2.civ@us.navy.mil. Fax submissions of the capabilities packages WILL NOT be accepted. Questions or comments regarding this notice may be addressed to Samuel Queen at the above address or via the above email address.