Inactive
Notice ID:N3220521R4190
THIS IS A SOURCES SOUGHT NOTICE ONLY. This is not a solicitation or request for quotes and no contract or purchase order will be awarded from this notice. There is no solicitation, specifications or d...
THIS IS A SOURCES SOUGHT NOTICE ONLY. This is not a solicitation or request for quotes and no contract or purchase order will be awarded from this notice. There is no solicitation, specifications or drawings available at this time. The Government is not obligated to and will not pay for any information received from potential sources as a result of this synopsis. The Military Sealift Command has a requirement for the upcoming Regular Overhaul/ Dry Dock (ROH/DD) for the USNS BURLINGTON (T-EPF 10) commencing on or about 01 November 2021 for 66 calendar days. The USNS BURLINGTON (T-EPF 10) has a length of 337.9 ft., a Beam of 93.5 ft., a Draft of 12 ft. 8.5 in, and is 2,500 tons. Work to be performed at Contractor's facility on or about the above mentioned date. Area of consideration is East Coast/ Gulf Coast. Estimated issue date of this solicitation is on/about 03 May 2021. After issuance, solicitation may be obtained by accessing https://beta.Sam.gov/. While the finalized list of work items are still under development, a list of the notional work package items is as follows: • Ride Control System Modification • Fire Doors and Shutters • Flight Deck Preservation • Flight Deck Tie- Downs Replacement • Structural Inspections • Reverse Osmosis Unit and Potable System Maintenance • Clean Transformers • Gauge Calibration • Range Hood Fire Extinguishing System • Underwater Hull Cleaning and Painting • Fuel Tank Repair • Reduction Gear Service • Annual Radar Service • Stern Ramp Maintenance • HVAC and Refrigeration System Maintenance ***NOTES OF CONSIDERATION*** Aluminum welding is a skill that requires specialized expertise that differs from traditional steel welding. The contractor needs to be able to provide ABS and approved material certs, ABS approved aluminum welder certs, and ABS approved aluminum welding procedures to MSC rep and ABS Surveyor. All welds shall include Non-destructive testing (NDT) to the satisfactory of the MSC rep and ABS surveyor. As a minimum, PT, UT, (where possible) and 5X visual shall be conducted on all welds. Contractor shall use protective enclosures for a moisture and draft free environment while welding. Pulse Gas Metal Arc Welding (GMAW) shall be used on repairs and install where deck plate is 6mm and below. All Small businesses, Service-Disabled Veteran-Owned Small Business, Certified HUBZone and Certified 8(a) Small Businesses are encouraged to respond. The Government will determine whether a set-aside acquisition in lieu of full and open competition is in the Government’s best interest. This office anticipated award of a contract no later than 15 September 2021. The appropriate NAICS Code is 336611. THIS IS NOT A REQUEST FOR QUOTE OR PROPOSAL. It is a market research tool used to determine the availability and adequacy of potential small business sources prior to determining the method of acquisition and issuance of an award. The Government is not obligated to and will not pay for any information received from potential sources as a result of this synopsis. It is requested that interested small businesses submit to the contracting office a brief capabilities package demonstrating ability to provide the requested items. This document shall address, as a minimum the following: (1) Company Profile to include number of employees, office location(s), DUNS number, CAGE Code and a statement regarding small business designation and status; (2) The facility where the work will be performed; (3) Partnership, teaming, joint ventures, or mentor-protégé agreements with any large businesses. Submission of a capabilities statement is not a prerequisite to any potential future offerings, but participation will assist the Government in tailoring requirement to be consistent with industry. RESPONSES ARE DUE on Tuesday, 03 May 2021 by 3:00 PM Eastern Standard Time. Responses shall be sent via mail to the following address: Military Sealift Command, Code N104-B3 (Attn: James Greene; Alvinia Jenkins), 471 East C Street, Norfolk, VA 23511. Email submissions of the capabilities packages (james.e.greene@navy.mil; alvinia.jenkins@navy.mil) WILL be accepted. Fax submissions of the capabilities packages WILL NOT be accepted. Questions or comments regarding this notice may be addressed to James Greene and/or Alvinia Jenkins at the above address or via email at james.e.greene@navy.mil and/or alvinia.jenkins@navy.mil.
