This is a Navy repair/overhaul/upgrade requirement for the MODULE ASSY – ENGIN (P/N 115E119G1; NSN 1680-01-585-4772), requiring units to be returned to Ready for Issue condition through inspection, component repair/replacement, reassembly, testing, and MIL-STD-130 marking. The contractor must furnish facilities, labor, materials, parts, tooling, and test equipment unless Government Furnished Material/equipment is expressly provided, and must maintain ISO 9001/SAE AS9100 quality and calibration systems plus configuration management. Repair performance is identified to BAE Systems Controls Inc. in Endicott, NY (Cage 89954), and the contractor must specify the actual repair source/division and location where work will be performed. The induction expiration date is 365 days after contract award, and warranty is 365 days after unit delivery with defects to be reported within 60 days after discovery. Required repair turnaround time and monthly throughput are to be filled in by the contractor, and BER/MOI/OAR items require DCMA concurrence and PCO direction before repair proceeds.

This is a U.S. Navy repair/upgrade requirement for the MODULE ASSY - ENGIN (NSN 1680-01-585-4772) and PROXIMITY SWITCH EL (NSN 1680-01-585-5024), returning items to Ready for Issue condition through inspection, component repair/replacement, reassembly, and testing. The contractor must perform repairs at the facility identified in the SOW, with the repair source/location listed as BAE Systems Controls Inc. in Endicott, N.Y. The contractor is responsible for all parts and materials unless Government Furnished Material is specified, and must maintain ISO 9001/AS9100 quality and calibration systems plus configuration management, marking, packaging, and storage compliance. Non-submission timelines include an induction expiration date of 365 days after contract award, a warranty of 365 days after delivery of unit or 60 days after defect discovery, and a required repair turnaround time to be established in the contract. Early and incremental deliveries are accepted, and BER/MOI/OAR determinations require DCMA concurrence and PCO disposition before repair.