Inactive Total Small Business Set-Aside (FAR 19.5)

This requirment is an open market Request for Quote (RFQ) and interested bidders should provide a quote with the soliciatation number N0017422SIMACQR30018, the vendors cage code, vendors DUNs number, ... This requirment is an open market Request for Quote (RFQ) and interested bidders should provide a quote with the soliciatation number N0017422SIMACQR30018, the vendors cage code, vendors DUNs number, point of contact, telephone number, shipping charges, and FOB destination. Interested bidders should provide quote NLT 17 Mar 2022. Vendor must be registered in SAMs with an ACTIVE account. STATEMENT OF WORK for Bluehill Universal Software INTRODUCTION The Naval Surface Warfare Center, Indian Head Division (NSWC IHD), Materials Science Branch has a requirement for energetics analysis using the Instron 8800 MTB18886 Testing Frame. Instron’s Bluehill Universal software needs to be installed on the frame computer for high-rate quasi-static testing and data acquisition. SCOPE This Statement of Work describes and defines the Parts and Services requirements for the software that controls the Instron 8800 MTB18886 Testing Frame located in Building 764. REQUIREMENTS The Contractor shall provide personnel, unlimited labor, travel, parts, shipping, phone and web support for system upgrades as defined here within the SOW at NSWC IHD. Software The Contractors shall install Bluehill Universal on the computer that controls the Instron 8800 MTB18886 Testing Frame in Building 764. The software shall include the “General and Components Application Module” and “TestProfiler for Bluehill Universal.” Shipping The cost of shipping of parts shall be included. Technician Certification The instrument shall be upgraded in accordance with the manufacture’s specification by factory-trained technicians. Software / Hardware Updated software and hardware shall be included. Post-Repair System Survey Upon completion of parts installation and services, the system passes all manufacturer verification and calibration checks. WARRANTY All components replaced by the Contractor shall be covered by the Standard Commercial warranty. DELIVERY/ PERIOD OF PERFORMANCE Delivery, installation, and training shall take place within three (3) months from date of award. PLACE OF PERFORMANCE The Contractor shall install the software and conduct a customer training session at NSWC IHD, Building 764 located at 5261 Guillotine Place, Indian Head, MD. POINTS OF CONTACT AND DELIVERY LOCATION NSWC Indian Head Technical POC: Colin Qualters, Code R31CQ Material Properties Branch 5261 Guillotine Place Indian Head, MD 20640 colin.s.qualters.civ@us.navy.mil 301-744-4338 STATEMENT OF WORK for Bluehill Universal Software INTRODUCTION The Naval Surface Warfare Center, Indian Head Division (NSWC IHD), Materials Science Branch has a requirement for energetics analysis using the Instron 8800 MTB18886 Testing Frame. Instron’s Bluehill Universal software needs to be installed on the frame computer for high-rate quasi-static testing and data acquisition. SCOPE This Statement of Work describes and defines the Parts and Services requirements for the software that controls the Instron 8800 MTB18886 Testing Frame located in Building 764. REQUIREMENTS The Contractor shall provide personnel, unlimited labor, travel, parts, shipping, phone and web support for system upgrades as defined here within the SOW at NSWC IHD. Software The Contractors shall install Bluehill Universal on the computer that controls the Instron 8800 MTB18886 Testing Frame in Building 764. The software shall include the “General and Components Application Module” and “TestProfiler for Bluehill Universal.” Shipping The cost of shipping of parts shall be included. Technician Certification The instrument shall be upgraded in accordance with the manufacture’s specification by factory-trained technicians. Software / Hardware Updated software and hardware shall be included. Post-Repair System Survey Upon completion of parts installation and services, the system passes all manufacturer verification and calibration checks. WARRANTY All components replaced by the Contractor shall be covered by the Standard Commercial warranty. DELIVERY/ PERIOD OF PERFORMANCE Delivery, installation, and training shall take place within three (3) months from date of award. PLACE OF PERFORMANCE The Contractor shall install the software and conduct a customer training session at NSWC IHD, Building 764 located at 5261 Guillotine Place, Indian Head, MD. POINTS OF CONTACT AND DELIVERY LOCATION NSWC Indian Head Technical POC: Colin Qualters, Code R31CQ Material Properties Branch 5261 Guillotine Place Indian Head, MD 20640 colin.s.qualters.civ@us.navy.mil 301-744-4338 CLAUSES: 52.204-24; 52.204-25; 52.204-26; 52.204-2; 52.204-3; 52.204-7; 52.204-13; 52.204-19; 52.209-10; 52.211-17; 52.219-1; 52.219-28; 52.222-19; 52.222-21; 52.222-26; 52.222-50; 52.223-18; 52.225-13; 52.225-18; 52.232-1; 52.232-8; 52.232-39; 52.232-40; 52.233-1; 52.233-3; 52.233-4; 52.213-1; 52.217-17; 52.247-34; 52.249-1; 52.249-4; 52.252-1; 52.252-2; 252.203-7000; 252.203- 7002; 252.203-7005; 252.204-7003; 252.204-7008; 252.204-7009; 252.204- 7012; 252-204-7015; 252.211-7003; 252.225-7001; 252.225-7048; 252.232- 7003; 252.232-7006; 252.232-7010; 252.243-7001; 252.244-7000; 252.247-7023;