Anti-Compromise Emergency Destruct (ACED) Ignition Block and Fire Assembly
This is a combined synopsis/solicitation in accordance with FAR 5.201. This synopsis is prepared in accordance with guidance in FAR 5.207, and is prepared for the purpose of notifying potential offero... This is a combined synopsis/solicitation in accordance with FAR 5.201. This synopsis is prepared in accordance with guidance in FAR 5.207, and is prepared for the purpose of notifying potential offerors of an Firm Fixed Priced solicitation for supplies in support of the Naval Surface Warfare Center Indian Head Explosive Ordnance Disposal Technology Division (NSWCIHEODTD). The Request for Quote (RFQ) N0017420Q0054 will be the only written solicitation, which will be issued, unless amended. The award will be made based on price. Quotes will be due by 12 June 2020 at 12:00 PM EST. The Naval Surface Warfare Center Indian Head Explosive Ordnance Disposal Technology Division (NSWC IHEODTD) has a requirement for STATEMENT OF WORK 1.0 INTRODUCTION: The Naval Surface Warfare Center Indian Head Explosive Ordnance Disposal Technology Division (NSWC IHEODTD) is pursuing procurement of Anti-Compromise Emergency Destruct (ACED) Ignition Blocks and ACED First Fire Mix. This procurement shall consist of manufacturing both the ACED Ignition Blocks and ACED First Fire Mix, Conducting Lot Acceptance Tests, and delivery to NSWC Indian Head. 2.0 SCOPE: The Contractor shall provide all labor, material, and facilities to manufacture the ACED Ignition Blocks and First Fire Mix. All test data and documentation shall be provided to NSWC IHEODTD. The government shall be provided the opportunity to witness any and all tests conducted. 3.0 TASKS/DELIVERABLES: 3.1 ACED IGNITION BLOCKS: The Contractor shall manufacture a total of three hundred and thirteen (313) ACED Ignition Blocks according to NAVSEA DWG. NO. 6260722. Quantity of two hundred and twenty-eight (228) Blocks will be shipped to NSWC IHEODTD, quantity of twelve (12) Blocks will be used for lot acceptance testing, and quantity of seventy-three (73) Blocks will be used for Hazard Classification Testing. The Ignition Blocks shall be manufactured in one lot. Cross blending of the Ignition Block mix is acceptable. Package Ignition Blocks in accordance with SPI-PHST-319. Safety Data Sheet (SDS) will be generated and delivered to NSWC IHEODTD. UN Series Six (6) Hazard Classification Testing will be conducted and a test report delivered to NSWC IHEODTD. 3.2 ACED FIRST FIRE ASSEMBLY: The Contractor shall manufacture a total of one hundred seventy-four (174) ACED First Fire Assembly according to NAVSEA DWG. NO. 6260715. DWG. 6260715 Find No. 1 Mil-B-117 shall be revised to Mil-DTL-117H Type 1, Class H, Style 2. Quantity of one hundred and fourteen (114) First Fire Assemblies will be shipped to NSWC IHEODTD, quantity six (6) First Fire Assemblies will be used for lot acceptance testing, and quantity of fifty-four (54) First Fire Assemblies will be used for Hazard Classification Testing. The First Fire Assemblies shall be manufactured in one (1) lot. Cross blending of the First Fire Mix is acceptable. Package the First Fire Mix in accordance with SPI-PHST-320. Safety Data Sheet (SDS) will be generated and delivered to NSWC IHEODTD. UN Series Six (6) Hazard Classification Testing will be conducted and a test report delivered to NSWC IHEODTD. 4.0 LOT ACCEPTANCE TESTING: The Contractor shall conduct a LAT by testing a combination of one (1) First Fire Assembly and two (2) Ignition Blocks. The Blocks and shall be positioned for test as depicted in the Ignition Destruct Package assembly drawing (NAVSEA DWG NO. 6260952). The Contractor shall use an igniter equivalent to the igniter assembly (NAVSEA DWG NO.6260725). The Igniter shall be used to ignite the First Fire Mix. Stand off distance between the Igniter and the First Fire Mix Assembly shall be 0.25 inches. Each LAT shall be recorded on a digital video disc (DVD) documenting the test set-up and test firing. The success criterion is successful ignition and complete consumption of both the First Fire Assembly and Ignition Blocks. Residue will be inspected to insure complete burn of both the First Fire Assembly and Ignition Blocks. 5.0 APPLICABLE DRAWINGS: Dwg No. Title 6260722 Ignition Block 6260715 First Fire Assembly 6260769 Ignition Material 6260754 Fluorel 6260952 Ignition Destruct Package 6260725 Igniter Assembly SPI-PHST-319 Ignition Block Special Packaging Instruction SPI-PHST-320 First Fire Assembly Special Packaging Instruction 6.0 DELIVERABLES: Certification of Compliance of the Ignition Blocks to the drawings and specification shall be provided to NSWC IHEODTD. (CDRL A001) Certification of Compliance of the First Fire Assemblies to the drawings and specification shall be provided to NSWC IHEODTD. (CDRL A001) Three hundred and thirteen (313) Ignition Blocks (DWG NO. 6260722) One hundred and seventy-four (174) First Fire Assembly (DWG NO. 6260715) Raw Material Certification shall be provided to NSWC IHEODTD. (CDRL A001) Three (3) copies of the LAT DVD shall be a deliverable to NSWC IHEODTD. (CDRL A002) SDS for both Ignition Blocks and First Fire Assemblies shall be a deliverable to NSWC IHEODTD. (CDRL A003) UN Series 6 Hazard Classification Test Report shall be a deliverable to NSWC IHEODTD. (CDRL A004) 7.0 PERIOD OF PERFORMANCE/SCHEDULE: The period of performance of this contract shall be six (6) months after award of the contract. 8.0 ADDRESS/POC FOR SHIPMENT: Class 1 Material shall be shipped to: Explosives Scales Facility ATTN: Daniel Michalek (301-744-2369) 5021 Safe Haven Way Indian Head, MD 20640-5173 All Associated Documentation, DVD and LAT information: Attn: Daniel Michalek CAD/PAD Department 4393 Benson Road, Suite 120 Indian Head, MD 20640-5092 The North American Industry Classification System (NAICS) code is 325920 Explosive Manufacturing. This procurement includes unclassified controlled technical information assigned a restricted distribution statement which is export controlled. To receive this unclassified controlled technical information, an Offeror must be currently certified through the United States/Canada Joint Certification Program. To become certified for receipt of the technical documents, a U.S. Offeror must submit a completed DD Form 2345 to the U.S./Canada Joint Certification Office. Canadian Offerors may submit either a completed DD Form 2345 or DSS-MAS 9379 for certification. In addition, a copy of the company's State/Provincial Business License, Incorporation Certificate, sales Tax Identification Form or other documentation which verifies the legitimacy of the company must accompany all DD Form 2345s. Additional information on the Joint Certification Program and a checklist for completion of the DD Form 2345 is available at the following website: http://www.dla.mil/HQ/InformationOperations/Offers/Products/LogisticsApplications/JCP/. Offerors are encouraged to apply for certification as early as possible in order for processing and receipt of information to be completed in sufficient time to prepare a proposal before solicitation closing. Solicitations are ONLY available through download from SAM Beta at https://beta.sam.gov/. * All offerors must be registered in DOD's SAM (System Administrative Management www.sam.gov) with completed and up to date representations and certifications for the NAICS code provided in this synopsis within Online Representations and Certifications Application (ORCA at http://www.orca.bpn.gov). Copies of solicitations will NOT be emailed, faxed, mailed or provided in person. These requests WILL NOT BE ACKNOWLEDGED. It is the REGISTRANT'S responsibility to periodically check the Beta SAM website for the current status of the solicitation and possible amendments. Email all proposals to: Marlene Ridgell marlene.ridgell@navy.mil
Data sourced from SAM.gov.
View Official Posting »