MOTION CAPTURE SYSTEM
AMENDMENT 0001 - The purpose of this amendment is to provide responses to questions submitted during the open question period, extend the offer due date, and provide amended specifications, to provide... AMENDMENT 0001 - The purpose of this amendment is to provide responses to questions submitted during the open question period, extend the offer due date, and provide amended specifications, to provide additional clarity. COMBINED SYNOPSIS/SOLICITATION This is a combined synopsis/solicitation for commercial items, prepared in accordance with the format in Federal Acquisition Regulations (FAR) Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. Solicitation number N00173-24-Q-TL09 is issued as a request for quotation (RFQ), under FAR subpart 13.5. Solicitation documents and incorporated provisions are those in effect through Federal Acquisition Circular 2023-06, DPN 20231222 and NMCARS 18-24. SECTION I: GENERAL INFORMATION All changes to this solicitation, that occur prior to the closing date, will be issued via amendment posted to the announcement, on Government-wide Point of Entry (beta.sam.gov). It is the responsibility of interested vendors to monitor the announcement for amendments that may be issued to this solicitation. For changes made after the closing date, only those vendors that provide a quote will be provided any changes/amendments and considered for future discussions and/or award. Questions must be submitted to the Point of Contact, no later than seven (7) days after the Posted Date. SECTION II: REQUIREMENT INFORMATION The Naval Research Laboratory (NRL) has a requirement for the delivery, installation, commissioning, operator training and system verification of a commercially available Motion Capture System, that will be utilized for recording, storing and analyzing 3- dimensional movements of robotic systems and human interaction with those systems, as well as for real-time control of autonomous systems. Complete physical, functional, performance requirements are provided in the attachment of this solicitation. The anticipated line item structure, as follows is based on the items outlined in the salient characteristics (Attachment 1): Item Schedule of Supplies/Services 0001 Motion Capture System -- To include all cameras, hardware connections and installation, computer system(s), markers, start-up and demonstration of the complete system. 0002 Mobile Motion Capture Setup For Off-Site Experiments – Provide additional 16 camera units and all necessary components, hardware and software for system Full setup and training for this mobile setup shall be provided as well. The Manufacturer shall also provide an additional 8 cameras with a wider Field of View and a shorter range for the purpose of a small area close range setup 0003 System Installation, Verification and Commissioning 0004 Operator Training 0005 Option – Extended Warranty TOTAL PRICE $_________ WITH EXTENDED WARRANTY OPTION $_________ WITHOUT EXTENDED WDARRANTY OPTION In accordance with FAR 52.204-22, alternative line items structures that best reflect the Vendor’s practices and proposed items may be submitted. NOTE: Include estimated delivery, for each CLIN, either as a date or as days after receipt of order (ARO) SECTION III: DELIVERY AND OTHER REQUIREMENT INFORMATION Installation shall occur no later than 15 days after delivery of equipment. Documentation, to include user’s manuals, etc., shall be delivered at time of delivery of equipment Delivery Location: Receiving Officer Contract Number: TBD ATTN: TBD, Code: TBD Naval Research Laboratory 45555 Overlook Ave., SW, Washington, DC 20375 Inspection / Acceptance: Inspection acceptance will be in accordance with FAR 52.212-4 unless the Contracting Officer determines other acceptance procedures to be more appropriate for the acquisition of this complex commercial item. FOB Point: DESTINATION, Free of expense to the Government, in accordance with FAR 52.247-34. Requirements For On-Site Contractors: For those portions of the work performed at any NRL site, the contractor must comply with the Requirements for On-Site Contractors which are hereby attached in this solicitation in Attachment 2 – Requirements for On-Site Contractors. contractor employees shall identify themselves as contractor personnel by introducing themselves or being introduced as contractor personnel and displaying distinguishing badges or other visible identification for meetings with Government personnel. In addition, contractor personnel shall appropriately identify themselves as contractor employees in telephone conversations and in formal and informal written correspondence. SECTION IV: SUBMISSION & PROPOSAL REQUIREMENTS FAR 52.212-1, Instructions To Offerors— Commercial Products And Commercial Services (SEP 2023) - And Addenda To FAR 52.212-1 applies to this acquisition. FAR 52.212-1 has been tailored to include the following additional instructions: m) SUBMISSION: quotes shall be submitted electronically, via email, to the Point of Contact listed in this solicitation, by the Date Offers are Due identified in the General Information Section of this solicitation. Facsimile quotes are NOT authorized. A confirmation receipt will be provided, but it is the sole responsibility of the Vendor to ensure that its response is received in its entirety and in a timely manner. n) QUOTE REQUIREMENTS: Offerors shall provide a separate technical proposal and quotation with their proposed products and pricing, along with product literature, for the items being offered, so that compliance with the specifications can be evaluated. Vendor shall submit a technical proposal, with supporting documentation that confirms the proposed item(s) meet or exceeds each and all physical, functional, performance requirements and any other terms and conditions specified in this solicitation and its attachment(s). The quote shall also include: Company Information, to include Company Name, Address, Unique Entity ID (UEI) Number and Cage Code, and company Point of contact, phone number, email address and web page URL. Letter of Authorization – If providing the products/items of another manufacturer as an Authorized Reseller/Partner, the Vendor shall include some form of documentation from the manufacturer illustrating that the Vendor is an Authorized Reseller/Partner. Warranty Summary - Vendor shall include commercial warranty description and summary in the technical quote, for ease of evaluation, and not as a separate document. Software Licence Summary - If including a software product in its quote, Vendor shall provide a summary of its standard federal government software license in its technical proposal. The full software license shall be added as an attachment to the technical proposal. If the Vendor does not have a federal government software license, the Contractor shall provide a summary and copy of its commercial software license customarily provided to the public Foreign Parts Usage - The Vendor shall provide a detailed explanation of (a) how the use of foreign parts will be prevented or minimized, (b) how the impact of any employed foreign parts will be mitigated, and (c) what steps will be taken to protect the system from tampering between system manufacturing and system installation. Compliance Matrix: Vendor shall include a cross reference chart to show whether the proposed solution (a) meets each of the threshold requirements in the specifications. The chart shall also (b) reference page and section of the technical proposal, where information may be found. System for Award Management (SAM): Offerors must be registered in SAM (www.sam.gov in order to be considered for award. Vendor shall include a completed copy of the provision at 52.212-3, Vendor Representations and Certifications – Commercial Items, with its offer. Facility Work Requirement Sheet: Offeror shall include a facility work requirement sheet, in the technical proposal. The facility work requirement sheet shall also include NRL site preparation requirements. To facilitate the award process, all quotes must include a statement regarding the terms and conditions herein as follows: "The terms and conditions in the solicitation are acceptable to be included in the award document without modification, deletion, or addition." OR "The terms and conditions in the solicitation are acceptable to be included in the award document with the exception, deletion, or addition of the following:" Vendor shall list exception(s) and rationale for the exception(s). The Vendor shall agree to hold the prices in its offer firm for sixty (60) calendar days from the date specified for receipt of offers. o) This procurement is for new equipment ONLY. No remanufactured or "gray market" items are acceptable. All equipment must be covered by the manufacturer's warranty. p) Vendor shall be an Original Equipment Manufacturer (OEM), authorized dealer, authorized distributor, or authorized reseller or partner for the proposed equipment/system, such that OEM warranty and service are provided and maintained by the OEM. All software licensing, warranty, and service associated with the equipment/system shall be in accordance with the OEM terms and conditions. q) General statements, that the vendor can or will comply with the requirements, that standard procedures will be used, that well known techniques will be used, or that paraphrases the RFQ's specifications in whole or in part, will not constitute compliance with the mandatory requirements concerning the content of the technical quote. r) ELECTRONIC AND INFORMATION TECHNOLOGY (EIT)- In accordance with Section 508 of the Rehabilitation Act of 1973 (29 USC 794d), all EIT supplies and services provided under this contract must comply with the applicable accessibility standards issued by the Architectural and Transportation Barriers Compliance Board at 36 CFR part 1194 (see FAR Subpart 39.2). Electronic and information technology (EIT) is defined at FAR 2.101. s) Any inquiry regarding this solicitation shall be submitted to the Contract Specialist, TaLisa Boyd, in writing, via e-mail at TaLisaBoyd@nrl.navy.mil, no later than three (3) business days after the release date of this solicitation. t) The NRL will not authorize, allow, or entertain requests for progress payments, installment payments, or advance payments. All payments will be in accordance with FAR 52.212-4(i) Payment.- (1) Items accepted. Payment shall be made for items accepted by the Government that have been delivered to the delivery destinations set forth in this contract. FAR SECTION V: FAR 52.212-2 - EVALUATION - COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (MAR 2023) applies to this acquisition. (a) The Government will award a contract resulting from this solicitation to the responsible vendor whose offer, conforming to the solicitation, will be most advantageous to the Government. Factors others than price shall be considered, and a Price/Technical Tradeoff analysis of both price and non-price factors will be conducted in evaluating each quote submitted. Trade-off considerations may result in the determination that it is in the best interest of the Government to award to other than the lowest priced Vendor or other than the highest technically rated Vendor. The following factors shall be used to evaluate offers: 1. TECHNICAL CAPABILITY: The Government will evaluate technical proposals based on how well the proposed product(s)s meet the requirement of the Specifications Attachment. For the purpose of evaluation, Technical Acceptability is defined as meeting all physical, functional, performance, and any other terms and conditions specified in the solicitation and its attachment(s). General statements, that the offeror can or will comply with the requirements, that standard procedures will be used, that well known techniques will be used, or that paraphrases the specifications in whole or in part, will not constitute compliance with the mandatory requirements. Your techincal proposal must spell out what you will provide and how what you will provide meets each specification. Do not merely provide a price quotation or merely at attach or reference spec sheets. The following table of technical requirements define specific value to the Government. Each requirement will be assessed an adjectival rating of Superior, Acceptable or Unacceptable, based on whether the information submitted both meets and exceeds specifications, meets specifications, or does not meet specifications. RATING: Superior (S) The proposal contains no deficiencies or weaknesses. Based on information provided, the offeror demonstrates an understanding of the specifications required and MEETS all specifications AND EXCEEDS some specifications. RATING: Acceptable (A) The proposal contains no deficiencies or weaknesses. Based on information provided, the offeror demonstrates an understanding of the specifications required and MEETS all specifications. RATING: Unacceptable (U) The proposal contains deficiencies, weaknesses, or omissions. Proposal fails to provide a reasonable, logical approach to fulfilling the government's requirements. Based on information provided, the proposal DOES NOT MEET all specifications. 2. PAST PERFORMANCE: Ratings: Acceptable (Low Risk): SPRS Supplier Risk Score of Blue, Purple, or Green, indicating a higher score in SPRS and are therefore, considered to have a lower risk of poor contract performance Not Acceptable (High Risk): SPRS Supplier Risk Score of Yellow or Red, indicating a lower score in SPRS and are therefore, considered to have a higher risk of poor contract performance Neutral: In the case of a supplier without a record of relevant past performance history in SPRS for the NAICS or PSC of the supplies being purchased, the supplier may not be evaluated favorably or unfavorably for its past performance history. 3. PRICE REASONABLENESS: The Government anticipates making a determination of fair and reasonable price based on competitive quotes. If only one response is received, the Government may use other methods as described at 13.106-3(a)(2). (b) Award on Initial Responses; Exchanges with Best-Suited Contractor The Government anticipates selecting the best-suited contractor from initial responses, without engaging in exchanges with vendors. Vendors are strongly encouraged to submit their best technical solutions and price in response to this RFQ. However, the Government may engage in limited exchanges to clarify certain aspects of quotes. Once the Government determines the contractor that is the best-suited (i.e., the apparent successful contractor), the Government reserves the right to communicate with only that contractor to address any remaining issues and revise quotes, if necessary, and finalize an award with that contractor. These issues may include technical and price. If the parties cannot successfully address any remaining issues, as determined in the sole discretion of the Government, the Government reserves the right to conduct exchanges with the next best-suited contractor and address any remaining issues and revise quotes, if necessary, and finalize an award with that contractor. (d) A written notice of award or acceptance of an offer, mailed or otherwise furnished ot the successful offeror, within the time for acceptance specified in the offer, shall result in a binding contract, without further action by either party. Before the offer’s specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award. (End of provision) SECTION VI: FAR 52.212-3 - OFFEROR REPRESENTATIONS AND CERTIFICATIONS- COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (NOV 2023) apply to this acquisition. Offerors shall have and maintain active annual Representations and Certification electronically in the System for Award Management (SAM) accessed through https://www.sam.gov . The Offeror shall complete only paragraph (b) of this provision if the Offeror has completed the annual representations and certification electronically in the System for Award Management (SAM) accessed through https://www.sam.gov. If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (v)) of this provision. If paragraph (j*) of the provision applies, a written submission is required: (j) Place of manufacture. (Does not apply unless the solicitation is predominantly for the acquisition of manufactured end products.) For statistical purposes only, the offeror shall indicate whether the place of manufacture of the end products it expects to provide in response to this solicitation is predominantly- (1) In the United States (Check this box if the total anticipated price of offered end products manufactured in the United States exceeds the total anticipated price of offered end products manufactured outside the United States); or (2) Outside the United States. SECTION VII: FAR 52.212-4, CONTRACTS TERMS AND CONDITIONS -- COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES -- (NOV 2023) applies to this acquisition. SECTION VII.A: ADDITIONAL FAR and DFARS PROVISIONS, INCORPORATED BY REFERENCE, THAT APPLY TO THIS SOLICITATION: FAR 52.252-1 SOLICITATION PROVISIONS INCORPORATED BY REFERENCE (FEB 1998) This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es): Federal Acquisition Regulation (FAR): https://www.acquisition.gov/browse/index/far Defense Federal Acquisition Regulation Supplement (DFARS) and Procedures, Guidance, and Information (PGI): https://www.acq.osd.mil/dpap/dars/dfarspgi/current/ Department of the Navy Acquisition Regulations (NMCARS): https://www.secnav.navy.mil/rda/DASN-P/Pages/NMCARS.aspx FAR 52.204-7 SYSTEM FOR AWARD MANAGEMENT (OCT 2018) FAR 52.204-16 COMMERCIAL AND GOVERNMENT ENTITY CODE REPORTING (AUG 2020) FAR 52.204-22 ALTERNATIVE LINE ITEM PROPOSAL (JAN 2017) FAR 52.216-1 TYPE OF CONTRACT (APR 1984) [Fill-In Firm-Fixed-Price] FAR 52.225-18 PLACE OF MANUFACTURE (AUG 2018) FAR 52.233-2 SERVICE OF PROTEST (SEP 2006); Fill in: Control Desk, Code 3200, Bldg. 222, Rm. 115, Naval Research Laboratory, 4555 Overlook Ave., S.W., Washington DC 20375 5326. DFARS 252.203-7005 REPRESENTATION RELATING TO COMPENSATION OF FORMER DOD OFFICIALS. (NOV 2011) DFARS 252.204-7008 COMPLIANCE WITH SAFEGUARDING COVERED DEFENSE INFORMATION CONTROLS (OCT 2016) DFARS 252.204-7017 PROHIBITION ON THE ACQUISITION OF COVERED DEFENSE TELECOMMUNICATIONS EQUIPMENT OR SERVICS – REPRESENTATION (MAY 2021) DFARS 252.204-7019 NOTICE OF NIST SP 800-171 DoD ASSESSMENT REQUIREMENTS (MAR 2022) DFARS 252.215-7007 NOTICE OF INTENT TO RESOLICIT (JUN 2012) DFARS 252.215-7008 ONLY ONE OFFER (DEC 2022) DFARS 252.215-7010 REQUIREMENTS FOR CERTIFIED COST OR PRICING DATA AND DATA OTHER THAN CERTIFIED COST OR PRICING DATA—BASIC (JUL 2019) DFARS 252.225-7974 REPRESENTATION REGARDING BUSINESS OPERATIONS WITH THE MADURO REGIME. (DEVIATION 2020-O0005) FEB 2020 DFARS 252.239-7017 NOTICE OF SUPPLY CHAIN RISK (FEB 2019) DFARS 252.244-7000 SUBCONTRACTS FOR COMMERCIAL PRODUCTS OR COMMERCIAL SERVICES (NOV 2023) DFARS 252.246-7007 CONTRACTOR COUNTERFEIT ELECTRONIC PART DETECTION AND AVOIDANCE SYSTEM (AUG 2016) DFARS 252.246-7008 SOURCES OF ELECTRONIC PARTS (MAY 2018) SECTION VII.B: ADDITIONAL FAR AND DFARS PROVISIONS, INCORPORATED BY FULL TEXT, THAT APPLY TO THIS SOLICITATION: FAR 52.204-24 REPRESENTATION REGARDING CERTAIN TELECOMMUNICATIONS AND VIDEO SURVEILLANCE SERVICES OR EQUIPMENT (NOV 2021) The Offeror shall not complete the representation at paragraph (d)(1) of this provision if the Offeror has represented that it "does not provide covered telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument" in paragraph (c)(1) in the provision at 52.204-26, Covered Telecommunications Equipment or Services—Representation, or in paragraph (v)(2)(i) of the provision at 52.212-3, Offeror Representations and Certifications-Commercial Products or Commercial Services. The Offeror shall not complete the representation in paragraph (d)(2) of this provision if the Offeror has represented that it "does not use covered telecommunications equipment or services, or any equipment, system, or service that uses covered telecommunications equipment or services" in paragraph (c)(2) of the provision at 52.204-26, or in paragraph (v)(2)(ii) of the provision at 52.212-3. (a) Definitions. As used in this provision— Backhaul, covered telecommunications equipment or services, critical technology, interconnection arrangements, reasonable inquiry, roaming, and substantial or essential component have the meanings provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (b) Prohibition. (1) Section 889(a)(1)(A) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L. 115-232) prohibits the head of an executive agency on or after August 13, 2019, from procuring or obtaining, or extending or renewing a contract to procure or obtain, any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. Nothing in the prohibition shall be construed to— (i) Prohibit the head of an executive agency from procuring with an entity to provide a service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or (ii) Cover telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles. (2) Section 889(a)(1)(B) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L. 115-232) prohibits the head of an executive agency on or after August 13, 2020, from entering into a contract or extending or renewing a contract with an entity that uses any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. This prohibition applies to the use of covered telecommunications equipment or services, regardless of whether that use is in performance of work under a Federal contract. Nothing in the prohibition shall be construed to— (i) Prohibit the head of an executive agency from procuring with an entity to provide a service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or (ii) Cover telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles. (c) Procedures. The Offeror shall review the list of excluded parties in the System for Award Management (SAM) ( https://www.sam.gov) for entities excluded from receiving federal awards for "covered telecommunications equipment or services". (d) Representation. The Offeror represents that— (1) It ? will, ? will not provide covered telecommunications equipment or services to the Government in the performance of any contract, subcontract or other contractual instrument resulting from this solicitation. The Offeror shall provide the additional disclosure information required at paragraph (e)(1) of this section if the Offeror responds "will" in paragraph (d)(1) of this section; and (2) After conducting a reasonable inquiry, for purposes of this representation, the Offeror represents that— It ? does, ? does not use covered telecommunications equipment or services, or use any equipment, system, or service that uses covered telecommunications equipment or services. The Offeror shall provide the additional disclosure information required at paragraph (e)(2) of this section if the Offeror responds "does" in paragraph (d)(2) of this section. (e) Disclosures. (1) Disclosure for the representation in paragraph (d)(1) of this provision. If the Offeror has responded "will" in the representation in paragraph (d)(1) of this provision, the Offeror shall provide the following information as part of the offer: (i) For covered equipment— (A) The entity that produced the covered telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the original equipment manufacturer (OEM) or a distributor, if known); (B) A description of all covered telecommunications equipment offered (include brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); and (C) Explanation of the proposed use of covered telecommunications equipment and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(1) of this provision. (ii) For covered services— (A) If the service is related to item maintenance: A description of all covered telecommunications services offered (include on the item being maintained: Brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); or (B) If not associated with maintenance, the Product Service Code (PSC) of the service being provided; and explanation of the proposed use of covered telecommunications services and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(1) of this provision. (2) Disclosure for the representation in paragraph (d)(2) of this provision. If the Offeror has responded "does" in the representation in paragraph (d)(2) of this provision, the Offeror shall provide the following information as part of the offer: (i) For covered equipment— (A) The entity that produced the covered telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the OEM or a distributor, if known); (B) A description of all covered telecommunications equipment offered (include brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); and (C) Explanation of the proposed use of covered telecommunications equipment and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(2) of this provision. (ii) For covered services— (A) If the service is related to item maintenance: A description of all covered telecommunications services offered (include on the item being maintained: Brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); or (B) If not associated with maintenance, the PSC of the service being provided; and explanation of the proposed use of covered telecommunications services and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(2) of this provision. (End of provision) FAR 52.211-14 NOTICE OF PRIORITY RATING FOR NATIONAL DEFENSE, EMERGENCY PREPAREDNESS, AND ENERGY PROGRAM USE (APR 2008) Any contract awarded as a result of this solicitation will be ? DX rated order; X DO rated order certified for national defense, emergency preparedness, and energy program use under the Defense Priorities and Allocations System (DPAS) (15 CFR700), and the Contractor will be required to follow all of the requirements of this regulation. (End of provision) SECTION VII(C): ADDENDA TO FAR 52.212-4 CONTRACT TERMS AND CONDITIONS – COMMERCIAL ITEMS (NOV 2021) SECTION VII(C)(1): AUTHORIZED GOVERNMENT REPRESENTATIVE Authorized Government Representative (AGR) for Inspection and Acceptance - *, Code *, Telephone Number: *, email: *.*@nrl.navy.mil (* - To be completed at award.) SECTION VIII: FAR 52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS—COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (DEC 2023) applies to this acquisition. (a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services: (1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)). (2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab Covered Entities (Dec 2023) (Section 1634 of Pub. L. 115-91). (3) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (Nov 2021) (Section 889(a)(1)(A) of Pub. L. 115-232). (4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015). (5) 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (Mar 2023) ( 31 U.S.C. 3903 and 10 U.S.C. 3801). (6) 52.233-3, Protest After Award (Aug 1996) ( 31 U.S.C. 3553). (7) 52.233-4, Applicable Law for Breach of Contract Claim (Oct 2004) (Public Laws 108-77 and 108-78 ( 19 U.S.C. 3805 note)). (b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services: The following clauses are included: 1, 4, 8, 9, 30, 32, 32, 35i, 38, 46, 47i, 48, 49, 51i, 54, 55, 62, 65 (c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services: __ (1) 52.222-41, Service Contract Labor Standards (Aug 2018) ( 41 U.S.C. chapter67). __ (2) 52.222-42, Statement of Equivalent Rates for Federal Hires (May 2014) ( 29 U.S.C. 206 and 41 U.S.C. chapter 67). __ (3) 52.222-43, Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (Multiple Year and Option Contracts) (Aug 2018) ( 29 U.S.C. 206 and 41 U.S.C. chapter 67). __ (4) 52.222-44, Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (May 2014) ( 29U.S.C.206 and 41 U.S.C. chapter 67). __ (5) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment-Requirements (May 2014) ( 41 U.S.C. chapter 67). __ (6) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services-Requirements (May 2014) ( 41 U.S.C. chapter 67). __ (7) 52.222-55, Minimum Wages for Contractor Workers Under Executive Order 14026 (Jan 2022). __ (8) 52.222-62, Paid Sick Leave Under Executive ...
Data sourced from SAM.gov.
View Official Posting »