The Navy (NAVSUP WSS Mechanicsburg) seeks fabrication of an Outer Tube for a critical shipboard system, designated Level I/SUBSAFE/DSS-SOC/TRIPER special-emphasis material, per drawing 7647786 using CRES Type 316 per drawing P5611722 and SAE AMS-QQ-S-763. The order requires First Article Testing/approval, Level I Joint Source Certification, hydrostatic pressure and intergranular corrosion testing, weld NDT, ISO 9001-based quality and calibration systems, and extensive material traceability/certification. Final delivery is required within 365 days after the contract effective date; certification CDRLs are due 20 days before scheduled delivery, the FAT report is due 180 days after PR approval with FAT report approval 60 days after receipt, and PNSY review/acceptance is 6 working days after receipt. The award will be a DX-rated order under Emergency Acquisition Flexibilities, FOB destination, with source Government quality assurance and past performance considered.

NAVSUP WSS Mechanicsburg requires an Outer Tube for a critical shipboard system, manufactured to Naval Ship System Command drawing 7647786 from CRES 316 per drawing P5611722 and SAE AMS-QQ-S-763, and designated Special Emphasis Level I/SUBSAFE material. The requirement imposes rigorous quality-system, inspection, traceability/certification, configuration-control, welding/brazing qualification, hydrostatic pressure testing, First Article Testing, and Level I Joint Source Certification requirements, with past performance considered in evaluation. Certification Data CDRLs are due on or before 20 days prior to scheduled delivery; the FAT report is due 180 days after PR approval, with approval 60 days after receipt and PNSY certification CDRL review/acceptance 6 working days after receipt. Final material delivery is required on or before 365 days after the effective date of the resulting contract. Any award will be a DX-rated national-defense priority order under DPAS and issued pursuant to Emergency Acquisition Flexibilities; emailed proposals are acceptable, while NECO quotes and faxed proposals are not.

The Government seeks 10 units of NSN 7H-1240-016340653-L1 (TDP VER 003), delivered to NUWCDIVNPT in Newport, RI 02841-1709. Award requires the offeror, product/service, or manufacturer to meet applicable qualification requirements at time of award under FAR 52.209-1. The acquisition will not use FAR Part 12 commercial-item procedures, though interested parties may identify their interest and capability to meet the requirement with a commercial item within 15 days of the notice. The solicitation will identify the office for additional qualification-requirement information. The items may be subject to Free Trade Agreements and WTO Government Procurement Agreement requirements if the relevant DFARS clauses are included.

NAVSUP WSS Mechanicsburg requires manufacture of Outer Tubes for a critical shipboard system, made from CRES 316 per Naval Ship System Command drawings and subject to Level I/SUBSAFE special-emphasis controls, First Article Testing, hydrostatic pressure and non-destructive testing, welding/brazing qualification, ISO 9001-based quality systems, and extensive material traceability and certification. The award will be a DX-rated order under Emergency Acquisition Flexibilities, and past performance will be considered in evaluating offers. Final material delivery is required within 365 days after contract effective date; certification CDRLs are due 20 days before scheduled delivery, the First Article Test report 180 days after PR approval, LT approval of that report 60 days after receipt, and Portsmouth Naval Shipyard (PNSY) certification review/acceptance 6 working days after receipt. Delivery is FOB destination with PNSY review/acceptance, and Government quality assurance will be performed at source. Offerors should be prepared for rigorous Level I certification, testing, traceability, and drawing-access requirements.

This is a NAVSUP WSS Mechanicsburg procurement for an Outer Tube used in a critical shipboard system, designated Special Emphasis Level I/SUBSAFE material requiring strict quality and traceability controls. The Outer Tube must conform to Naval Ship System Command drawing 7647786 and CRES 316 material per drawing P5611722 and SAE AMS-QQ-S-763, with required chemical/mechanical certification, intergranular corrosion testing, hydrostatic pressure testing, and non-destructive testing of weld repairs or production welds. First Article Testing and Level I Joint Source Certification are required, and the contractor must maintain an ISO-9001 quality system with ISO-10012/ANSI-Z540.3 and ISO-17025 calibration requirements; NAVSUP WSS will consider past performance. Delivery timelines require Certification CDRLs 20 days before scheduled delivery, FAT report 180 days after PR approval, FAT report approval 60 days after receipt, PNSY review/acceptance of Certification CDRLs 6 working days after receipt, and final material delivery within 365 days after contract effective date. The award will be a DX-rated national defense priority order under DPAS and issued pursuant to Emergency Acquisition Flexibilities; emailed proposals are acceptable, NECO quotes will be rejected, and drawing access must be requested through SAM.gov.

This Navy/NAVSUP WSS procurement is for an Outer Tube for a critical shipboard system, designated Level I/SUBSAFE special-emphasis material and requiring First Article Testing, Level I Joint Source Certification, and compliance with drawings/specifications including CRES 316 per drawing P5611722 and SAE AMS-QQ-S-763. It will be a DX-rated defense priority order under Emergency Acquisition Flexibilities, with past performance evaluated and extensive quality, traceability, certification, and configuration-control requirements. The proposed delivery schedule requires certification data CDRLs on or before 20 days prior to scheduled delivery, FAT report 180 days after approval of PR, FAT report approval 60 days after receipt, PNSY review/acceptance of certification CDRLs 6 working days after receipt, and final material delivery on or before 365 days after contract effective date; a one-year warranty from delivery also applies. Government quality assurance is performed at source, delivery is FOB destination, and PNSY reviews/accepts certification CDRLs; Portsmouth NSY’s DODAAC is updated to N50286. Emailed proposals are acceptable, NECO quotes will be considered non-responsive, and faxed proposals are not allowed.

Seeking procurement of NIIN: 016340653, PERISCOPE,TUBE,OUT, quantity 10. See attached solicitation for more details.

Seeking procurement of NIIN: 016340653, PERISCOPE,TUBE,OUT, quantity 10. See attached solicitation for more details.

The requirement is for 10 units of NSN 7H-1240-016340653-L1, with delivery to NUWCDIVNPT in Newport, RI. Award will only be made if the offeror, product, or manufacturer meets the specified qualification requirements at the time of award under FAR clause 52.209-1. The government is not using commercial acquisition procedures under FAR Part 12 for this procurement. The acquisition may be subject to Free Trade Agreements and other trade agreements if the corresponding DFARS clauses are included in the solicitation. No budget amount is specified.