This is a NAVSUP WSS procurement for refurbishment of VACCO manifold assembly S1E10033-01A1 and related regulator, inlet/bypass, outlet, and relief valve assemblies used in a crucial shipboard system, designated Special Emphasis material. The contractor must clean, inspect, replace non-useable or unmarked parts, refurbish to VACCO drawings/specifications, maintain traceability, and provide material certifications, test certifications, CID marking, and a certificate of compliance. Quality requirements include an ISO-9001 or MIL-I-45208 quality system, Government quality assurance at source, welding/brazing procedures and qualifications approved prior to production, configuration/waiver/ECP controls, and mercury-free material. Offerors not the OEM must state the OEM and provide signed distributor authorization; if packaging occurs at a different location, the facility name, address, and CAGE must be provided. A one-year warranty from delivery applies, new welding procedure qualification requires at least 72-hour notification to DCMA, and award will be issued bilaterally as a DPAS-rated order.

This is a Navy procurement for refurbishment of critical shipboard manifold, regulator, and valve assemblies, designated as SPECIAL EMPHASIS (Level I) material due to safety-of-life implications. The contractor must perform inspection, disassembly, refurbishment to specific VACCO drawings, and replace parts lacking required markings or certifications, with extensive material certifications and testing (chemical, mechanical, weld, thread, and pressure) required. The effort demands a compliant quality system (ISO-9001 with specified calibration standards), government quality assurance at source, and submission of welding procedures, qualification data, and certificates of compliance. Additional obligations include configuration control, waiver/deviation approvals, and a one-year warranty from delivery. No budget, performance location, or submission timeline is specified; however, notice of at least 72 hours must be given to DCMA for any new weld procedure qualification testing.