This is a total small business set-aside Navy procurement for manufacturing a Bonnet and Stem Assembly for a 1-inch stop check valve, a critical shipboard component designated as SPECIAL EMPHASIS material (Level I/SUBSAFE) where incorrect or defective material could cause serious injury or loss of the ship. The contractor must comply with strict quality system requirements (ISO-9001 with ISO-10012/ANSI-Z540.3/ISO-17025 calibration, or MIL-I-45208 with MIL-STD-45662), provide material certifications with full traceability, and submit welding procedures and qualification data for Navy approval prior to any production welding. Extensive testing certifications, including pressure tests, non-destructive tests, and chemical/mechanical analysis of specific component parts, are required. The item carries a one-year warranty from delivery, and any resulting contract will be DO-certified for national defense under the Defense Priorities and Allocations System, requiring contractor acceptance of all contractual documents.

This opportunity is a total small business set-aside Navy procurement for a Bonnet and Stem Assembly for a 1-inch stop check valve, designated as SPECIAL EMPHASIS Level I/SUBSAFE material for use in a crucial shipboard system. The item must be manufactured per NAVSEA drawing 2177934 with strict material certification, chemical/mechanical analysis, pressure testing, welding/brazing qualifications, and thread inspection requirements. Contractors must maintain an ISO-9001 quality system with specified calibration standards, ensure full material traceability, and comply with configuration control and waiver/deviation approval processes. A one-year warranty from date of delivery is required, and the resulting contract will be DO-rated for national defense under the Defense Priorities and Allocations System. Performance location is not specified; interested parties should assess their ability to meet the extensive quality, certification, and Government source inspection requirements.

This is a total small business set-aside for a Bonnet and Stem Assembly for a 1-inch stop check valve, designated as SPECIAL EMPHASIS (Level I) material for a crucial shipboard system. The contractor must provide and maintain a quality system in accordance with ISO-9001, with specific requirements for material traceability, certification, and welding procedures. Performance of Government quality assurance is at the source, and the place of performance cannot be changed without authorization. The contract is DO certified for national defense under the Defense Priorities and Allocations System. No budget information, non-bid timelines, or location for performance are specified.