The Navy seeks a total small-business set-aside supplier for a 6-inch ball valve Stem Assembly consisting of Stem (piece 82), Stem Retaining Nut (piece 83), and Bushing (piece 84) built to NAVSEA Drawing 803-4384681 and General Notes Drawing 803-4384678. This is Special Emphasis Level I material for a critical shipboard system, requiring QQ-N-286 annealed and age-hardened material with no weld repair, plus certification, traceability, chemical/mechanical analysis, dye penetrant and ultrasonic inspection, and slow strain rate tensile testing at approved laboratories. The contractor must maintain an ISO 9001 quality system (or MIL-I-45208 alternate) with specified calibration requirements and provide Level I certifications, Objective Quality Evidence, and a certificate of compliance. Award will be bilateral requiring contractor written acceptance, is a DPAS-rated order under Emergency Acquisition Flexibilities, and will be evaluated with past performance considered; Government quality assurance will be performed at source. Drawings/technical documents may require access through SAM.gov/ECDS, and configuration control, waiver/deviation, ECP, traceability, and electronic signature requirements apply throughout.

This is a total small business set-aside Navy procurement for a Stem Assembly for a 6-inch ball valve, designated as SPECIAL EMPHASIS (Level I) material for use in a crucial shipboard system. The item consists of a stem, retaining nut, and bushing per NAVSEA drawings, with strict material and testing certification requirements including no weld repair on QQ-N-286 material, dye penetrant and ultrasonic inspections, and thread inspection per FED-STD-H28. The contractor must maintain a certified quality system (ISO-9001 with specific calibration standards) and comply with extensive traceability, configuration control, and government source inspection requirements. The resultant award will be issued bilaterally under Emergency Acquisition Flexibilities and is DO-rated for national defense under DPAS. Past performance will be considered in evaluation.

This opportunity is a total small business set-aside for the manufacture of a Stem Assembly for a 6-inch Ball Valve, designated as SPECIAL EMPHASIS material for critical shipboard systems. The contract requires compliance with detailed Navy drawings and specifications, including material certifications, traceability, and a quality system per ISO-9001. Specific testing includes dye penetrant and ultrasonic inspections, with no weld

This opportunity is for a Stem Assembly for a 6-inch Ball Valve, designated as SPECIAL EMPHASIS material for a crucial shipboard system, with performance location not specified. The contract is a total small business set-aside under Emergency Acquisition Flexibilities, requiring a bilateral award and a DO-rated national defense priority. Key requirements include a quality system per ISO-9001, strict material traceability and certification for QQ-N-286 nickel alloy, and no weld repair allowed on that material. The contractor must submit a certificate of compliance, maintain configuration control, and allow Government quality assurance at source, with all waivers requiring Contracting Officer approval. No budget amount or submission timeline is provided.