This is a Navy procurement for Bearing Balls (MS19064-20014) used in a crucial shipboard system and designated SPECIAL EMPHASIS/Level I material, requiring manufacture to ASTM F2215 from QQ-N-286 (annealed and unaged or age hardened), 27 HRC minimum hardness, no weld repair, and strict certification, traceability, and quality-system controls including ISO-9001 and ISO-10012 or ANSI-Z540.3/ISO-17025. Only sources with an acceptable Quality Control Manual are eligible; past performance will be evaluated, award will be a DX/DO-rated order under DPAS, and early/incremental delivery is acceptable at no additional cost to the Government. Final material delivery is required on or before 365 days after the effective date of the resulting contract, with Portsmouth Naval Shipyard review/acceptance of certification CDRLs taking 30 working days after receipt. The item carries a one-year warranty from delivery, Government quality assurance is performed at source, and slow strain rate tensile testing must be performed by one of the specified qualified laboratories. Contractors must also comply with configuration control, waiver/deviation/ECP, mercury-free, material marking, receiving/final inspection, and documentation requirements.

This contract is for the supply of MS19064-20014 ball bearings made from QQ-N-286 material, designated as SPECIAL EMPHASIS (Level I) material for use in a critical shipboard system. It imposes stringent quality assurance requirements, including an ISO-9001 quality system, mandatory material certifications (chemical, mechanical, hardness, and ultrasonic testing), traceability controls, configuration management, and a prohibition on weld repair of QQ-N-286. Only sources with an acceptable Quality Control Manual are eligible for award, and the resulting contract will be a DX/DO rated order certified for national defense under DPAS. Final delivery of material is due within 365 days after the contract effective date, with certification data due 20 days prior

This is a Navy procurement for special emphasis (Level I) bearing balls per MS19064-20014, requiring compliance with specifications such as ASTM F2215 and QQ-N-286. Offerors must have an acceptable Quality Control Manual, and past performance will be considered in evaluation. The contract imposes extensive quality assurance, traceability, certification, and testing requirements, including slow strain rate tensile testing at designated laboratories. Delivery requires certification data CDRLs submitted 20 days before scheduled delivery, government review/acceptance within 30 working days, and final material delivery within 365 days after the contract's effective date, with early and incremental delivery acceptable.

This opportunity is for the supply of a Ball, Bearing, a Special Emphasis (Level I) material for a crucial shipboard system, with final delivery required within 365 days after the contract's effective date. The contract is a total small business set-aside with a "DX/DO" national defense priority rating, and only sources with an acceptable Quality Control Manual are eligible for award. The contractor must provide and maintain a quality system in accordance with ISO-9001 and meet extensive traceability, certification, and material handling requirements, including quantitative chemical and mechanical analysis. Performance of services is at the contractor's facility, subject to Government Quality Assurance at source, and the place of performance cannot be changed without authorization. No specific budget amount is provided in the description.