The Navy is seeking a total small-business set-aside supplier for six 1.5-inch 90-degree, 700 PSI elbows manufactured to Newport News Drawing 257003, piece 128, for a critical shipboard system. The material is designated Special Emphasis (Level I/SUBSAFE) and requires MIL-C-15726 alloy C71500 or MIL-C-24679 alloy C71500, with extensive quality-system, welding/brazing, inspection, traceability, and certification requirements. This procurement is issued under Emergency Acquisition Flexibilities and requires an ISO 9001-based quality system with specified calibration requirements and Government source quality assurance. Drawings will be available on SAM.gov via restricted access requiring approval and POC notification, and past performance will be evaluated. Final delivery of material is scheduled at 365 days, with PNSY review/acceptance of certification CDRLs taking 45 working days after receipt; early and incremental delivery is acceptable at no additional cost to the Government.

This is a total small business set-aside for the manufacture of a 1 1/2 inch, 700 PSI elbow, designated as SPECIAL EMPHASIS material for a crucial shipboard system, with performance required at the contractor's facility. The material must be produced in accordance with Newport News Drawing 257003 using alloy C71500, and the contract includes a one-year warranty from the date of delivery. Final delivery of material is required 365 days after award, with certification data due 20 days prior to scheduled delivery and a 45-working-day review period for the Navy. The contractor must maintain a quality system per ISO-9001, submit weld procedures and qualification data for approval, and provide full material traceability with certifications. Drawings are available on SAM.gov with restricted access, and past performance will be considered in the evaluation.