Inactive

NSN 7H-4820-012952442, TDP VER 004, REF NR 3189830-2, QTY 12 EA, DELIVERY FOB ORIGIN. 1. THIS REQUIREMENT IS FOR THE PROCUREMENT OF 12 EACH OF AMPLIFIER,ELECTROHY NSN 4820 012952442, P/N 3189830-2 IAW... NSN 7H-4820-012952442, TDP VER 004, REF NR 3189830-2, QTY 12 EA, DELIVERY FOB ORIGIN. 1. THIS REQUIREMENT IS FOR THE PROCUREMENT OF 12 EACH OF AMPLIFIER,ELECTROHY NSN 4820 012952442, P/N 3189830-2 IAW DRAWINGS. THE VENDORS ARE REQUESTED TO PROVIDE THEIR BEST DELIVERY SCHEDULE. 2. AMC/AMSC IS 3R. THE GOVERNMENT DOES NOT OWN THE RIGHTS TO THE DATA. 3. THE SOLICIATION NUMBER IS N00104-24-R-YB79. A COPY OF THE SOLICITATION CAN BE OBTAINED FROM THE CONTRACTING SPECIALIST AND WILL BE AVAILABLE ON SAM.GOV/C ONTRACT OPPORTUNITIES. 4. ALL RESPONSIBILE SOURCES MAY SUBMIT A PROPOSAL WHICH SHALL BE CONSIDERED IF IT IS SUBMITTED IN ACCORDANCE WITH THE REQUIREMENTS OF THE SOLICITATION. 5. IN ORDER FOR YOUR OFFER TO BE CONSIDERED, YOU MUST SUBMIT THE ENTIRE RFP COMPLETED AND SIGNED, PRIOR TO THE CLOSING DATE/TIME LISTED ON THE RFP. 6. NECO OFFERS WILL NOT BE ACCEPTED. 7. MILITARY PACKAGING IS REQUIRED AND WILL NOT BE WAIVED. 8. INTERESTED PARTIES MAY OBTAIN COPIES OF MILITARY AND FEDERAL SPECIFICATIONSAND STANDARDS, QUALIFIED PRODUCTS LISTS (QPLS), QUALIFIED PRODUCT DATABASES (QPDS), MILITARY HANDBOOKS, AND OTHER STANDARDIZED DOCUMENTSFROM THE DOD SINGLE STOCK POINT (DDOSP) AT DOCUMENT AUTOMATION AND PRODUCTIONSERVICE (DAPS)IN PHILADELPHIA, PA. USERS MAY USE ASSIST-QUICK SEARCH TO SEARCH FOR AND DOWNLOAD AVAILABLE DOCUMENTS DIRECTLY USING STANDARD BROWSER SOFTWARE. DOCUMENTS THAT ARE NOT AVAILABLE FOR DOWNLOADING FROM ASSIST-QUICK SEARCH CAN BE ORDERED FROM THE DODSSP WEBSITE USING THE ASSIST SHOPPING WIZARD AFTER OBTAINING A DODSSP CUSTOMER ACCOUNT BY FOLLOWING THE REGISTRATION PROCEDURES. USERS WHO DO NOT HAVE ACCESS TO THE INTERNET MAY CONTACT THE DODSSP ASSIST HELP DESK AT 215-697-6396 (DSN: 442-6396), OR MAIL THEIR REQUEST TO DLA DOCUMENT SERVICES, BLDG. 4/D, 700 ROBBINS AVENUE, PHILADELPHIA, PA 19111-5094. 9. BASED UPON MARKET RESEARCH, THE GOVERNMENT IS NOT USING THE POLICIES CONTAINED IN FAR PART 12, ACQUISITION OF COMMERCIAL ITEMS, IN ITS SOLICITATIONFOR THE DESCRIBED SUPPLIES OR SERVICES. HOWEVER, INTERESTED PERSONS MAY IDENTIFY TO THE CONTRACTING OFFICER THEIR INTEREST AND CAPABILITY TO SATISFY THE GOVERNMENT'S REQUIREMENT WITH A COMMERCIAL ITEM WITHIN 15 DAYS OF THIS NOTICE.

Inactive

CONTACT INFORMATION|4|TAYLOR FASCHING, N741.9|N/A|SEE EMAIL|TAYLOR.M.FASCHING.CIV@US.NAVY.MIL| ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)|19|||||||||||||||||||| INSPECTION OF SUPPLIES--FIXED-... CONTACT INFORMATION|4|TAYLOR FASCHING, N741.9|N/A|SEE EMAIL|TAYLOR.M.FASCHING.CIV@US.NAVY.MIL| ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)|19|||||||||||||||||||| INSPECTION OF SUPPLIES--FIXED-PRICE (AUG 1996)|2||| DESIRED AND REQUIRED TIME OF DELIVERY (JUNE 1997)|29|001|12|500 DAYS AFTER AWARD||||||||||||||||||||||||||| STOP-WORK ORDER (AUG 1989)|1|| WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)|16|INVOICE AND RECEIVING REPORTS (COMBO)|N/A|TO BE DETERMINED|N00104|TO BE DETERMINED|TO BE DETERMINED|SEE SCHEDULE|TO BE DETERMINED|N/A|N/A|TO BE DETERMINED|||||| NAVY USE OF ABILITYONE SUPPORT CONTRACTOR - RELEASE OF OFFEROR INFORMATION (3-18))|1|| EQUAL OPPORTUNITY (SEP 2016)|2||| INTEGRITY OF UNIT PRICES (NOV 2021)|1|| SMALL BUSINESS SUBCONTRACTING PLAN (SEP 2023)|4||||| EQUAL OPPORTUNITY FOR WORKERS WITH DISABILITIES (JUN 2020)|2||| BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM-BASIC (FEB 2024)|11|||||||||||| LIST OF AWARD ATTACHMENTS|5|X||||| ALTERNATE A, ANNUAL REPRESENTATIONS AND CERTIFICATIONS (NOV 2023)|13|||||||||||||| BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024))|5|||||| ANNUAL REPRESENTATIONS AND CERTIFICATIONS (MAY 2024)|13|332919|750|||||||||||| TYPE OF CONTRACT (APR 1984)|1|FIRM-FIXED PRICE| NOTICE OF PRIORITY RATING FOR NATIONAL DEFENSE, EMERGENCY PERPARDENESS, AND ENRGY PROGAM USE (APRIL 2008))|2||X| THE CLOSING DATE FOR QUOTES IS HEREBY UPDATED TO 20 AUGUST 2024. ALL OTHER TERMS AND CONDITIONS REMAIN THE SAME. THE SOLICITATION CLOSE DATE IS HEREBY UPDATED TO 13 AUGUST 2024. ALL OTHER TERMS AND CONDITIONS REMAIN THE SAME. All freight is FOB Origin. The resultant award of this BUY solicitation will be issued bilaterally, requir Government source inspection is required. - Unit Price:__________ FIRM - Total Price:__________ FIRM - Procurement Turnaround Time (PTAT) :__________ - Awardee CAGE: __________ - Inspection & Acceptance CAGE, if not at source:__________ Offerors whose company size is greater than the size standard for theapplicable NAICS in FAR 52.204-8 herein (750 employees) shall submit a SmallBusiness Subcontracting Plan with their proposal, in accordance with FAR52.219-9. In accordance with FAR 252.215-7009 the Proposal must include the completed Proposal Adequecy Checklist. Proposals submitted via NECO are not acceptable. Please submit proposal and checklist via email to taylor.m.fasching.civ@us.navy.mil 1. SCOPE 1.1 This contract/purchase order contains the requirements for manufacture and the contract quality requirements for the AMPLIFIER,ELECTROHY . 2. APPLICABLE DOCUMENTS 2.1 Applicable Documents - The document(s) listed below form a part of this contract/purchase order including modifications or exclusions. 2.1.1 "Document References" listed below must be obtained by the Contractor. Ordering information is included as an attachment to this contract/purchase order. 3. REQUIREMENTS 3.1 Cage Code/Reference Number Items - The AMPLIFIER,ELECTROHY furnished under this contract/purchase order shall be the design represented by Cage Code(s) reference number(s). Cage _______ ref. no. ;78062 3189830-2; 3.2 Marking - This item shall be physically identified in accordance with ;MIL-STD-130, REV N, 16 NOV 2012; . 3.3 Changes in Design, Material Servicing, or Part Number - Except for a Code 1 change, which shall be processed as provided in the code statement shown below, no substitution of items shall be made until the NAVICP-MECH Contracting Officer has notified and approval has been given by issuance of a written change order. When any change in design, material, servicing or part number is made to replace or substitute any item to be furnished on this contract/purchase order, the Contractor shall furnish, for the substituting/replacement item, a drawing and an explanation of the reason for the change, explaining the reason therefor. If finished detail drawings are not available, shop drawings in the form used by the manufacturer will be acceptable for Government evaluation. When notifying the Procurement Contracting Officer of the reasons for making substitutions, the type of change shall be indicated by code number in accordance with one of the following statements: Code 1: PART NUMBER CHANGE ONLY - If the Manufacturer's Part Number indicated thereon has changed, but the parts are identical in all respects, supply the item and advise NAVICP-MECH immediately of the new part number. Code 2: Assembly (or set or kit) not furnished - Used following detail parts. Code 3: Part not furnished separately - Use assembly. Code 4: Part redesigned - Old and new parts are completely interchangeable. Code 5: Part redesigned - New part replaces old. Old part cannot replace new. Code 6: Part redesigned - Parts not interchangeable. 3.4 Mercury Free - The material supplied under this contract/purchase order is intended for use on submarines/surface ships and therefore shall contain no metallic mercury and shall be free from mercury contamination. Mercury contamination of the material will be cause for rejection. If the inclusion of metallic mercury is required as a functional part of the material furnished under this contract, the Contractor shall obtain written approval from the Procurement Contracting Officer before proceeding with manufacture. The contractor's request shall explain in detail the requirements for mercury, identify specifically the parts to contain mercury, and explain the method of protection against mercury escape. Such a request will be forwarded directly to the Procurement Contracting Officer with a copy to the applicable Government Inspector. Upon approval by the Contracting Officer, the vendor will provide a "Warning Plate" stating that metallic mercury is a functional part of the item and will include name and location of that part. The use of mercury, mercury compounds, or mercury-bearing instruments and/or equipment in a manner which might cause contamination in the manufacture, assembly, or test of material on this contract is prohibited. The most probable causes of contamination are direct-connected manometers, mercury vacuum pumps, mercury seals, or the handling of mercury in the immediate vicinity. Mercury switches, mercury in glass thermometers, standard cells and other items containing mercury may be used if they are located so as not to constitute a contamination hazard. If external contamination by metallic mercury occurs or is suspected, the following test may be used to determine whether contamination by metallic mercury exists or whether corrective cleaning measures have been effective. Enclose the equipment in a polyethylene bag or close-fitting airtight container for eight hours at room temperature (70 degrees F minimum).Sample the trapped air and if mercury vapor concentration is 0.01 mg/cu meter or more, the material is mercury contaminated insofar as the requirements of this contract are concerned. These requirements shall be included in any subcontract or purchase order hereunder and the Contractor shall insure SubContractor compliance with these requirements. Technical questions pertaining to these requirements shall be referred to the Procurement Contracting Officer via the cognizant Administrative Contracting Officer. For background, the following information is provided: Mercury is corrosive to gold, silver, nickel, stainless steels, aluminum and copper alloys. Stainless steels, nickel, and copper alloys are widely used in reactor plants and other submarine/surface ship systems. Accidental trapping of mercury in a component could cause serious damage to vital parts. Mercury is also toxic if inhaled, ingested, or absorbed through the skin. It is evident that grave consequences could result from small amounts of mercury vapor present in an unreplenished submarine/surface ship atmosphere. 4. QUALITY ASSURANCE 4.1 Responsibility for Inspection - Unless otherwise specified in the contract/purchase order, the Contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contract/purchase order, the Contractor may use his own or any other facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements. 4.2 Responsibility for Compliance - All items must meet all requirements of this contract/purchase order. The inspection set forth in this specification shall become a part of the Contractor's overall inspection system or quality program. The absence of any inspection requirements shall not relieve the Contractor of the responsibility of assuring that all products or supplies submitted to the Government for acceptance comply with all requirements of the contract/purchase order. Sampling in quality conformance does not authorize submission of known defective material, either indicated or actual, not does it commit the Government to acceptance of defective material. 4.3 Records - Records of all inspection work by the Contractor shall be kept complete and available to the Government during the performance of contract/purchase order and for a period of 365 calendar days after final delivery of supplies. 5. PACKAGING 5.1 Preservation, Packaging, Packing and Marking - Preservation, Packaging, Packing and Marking shall be in accordance with the Contract/Purchase Order Schedule and as specified below. MIL-STD 2073 PACKAGING APPLIES AS FOUND ELSEWHERE IN THE SCHEDULE 6. NOTES 6.1 Ordering Information for Document References - The Department of Defense Single Stock Point (DODSSP), Website http://www.dsp.dla.mil/, provides product information for the Department Of Defense Index Of Specifications and Standards (DODISS) (i.e.Military/Federal Specifications and Standards), Data Item Descriptions (DIDs), and other DODSSP Products. Most Specifications can obtained directly from http://quicksearch.dla.mil/ A. Availability of Cancelled Documents - The DODSSP offers cancelled documentsthat are required by private industry in fulfillment of contractual obligationsin paper format. Documents can be requested by phoning the Subscription Services Desk. B. Commercial Specifications, Standards, and Descriptions - These specifications, standards and descriptions are not available from Government sources. Theymay be obtained from the publishers of the applicable societies. C. Ordnance Standards (OS), Weapons Specifications (WS), and NAVORD OSTD 600 Pages - These type publications may be obtained by submitting a request to: Commander, Indian Head Division, Naval Surface Warfare Center Code 8410P, 101 Strauss Avenue Indian Head, MD 20640-5035 D. On post-award actions, requests for "Official Use Only" and "NOFORN" (Not Releasable To Foreign Nationals) documents must identify the Government ContractNumber, and must be submitted via the cognizant Defense Contract Management Command (DCMC) for certification of need for the document. On pre-award actions such requests must be submitted to the PCO for certification of need for the document. E. NOFORN Military Specifications and Standards (including Amendments, Change Notices and Supplements, but NOT interim Changes) to be ordered from: Contracting Officer NAVSUP-WSS Code 87321 5450 Carlisle Pike P.O. Box 2020 Mechanicsburg, Pa. 17055-0788 F. Nuclear Reactor Publications Assigned NAVSEA Documents and Identification Numbers (i.e. NAVSEA Welding Standard, NAVSEA 250-1500-1) are to be ordered enue: Commanding Officer NAVSUP-WSS Code 009 5450 Carlisle Pike P.O. Box 2020 Mechanicsburg, Pa. 17055-0788 G. Technical Manuals Assigned NAVSEA Identification Numbers (i.e. NAVSEA Welding And Brazing Procedure, NAVSEA S9074-AQ-GIB-010/248) are to be ordered from: Commanding Officer NAVSUP-WSS Code 1 Support Branch 700 Robbins Avenue Philadelphia, Pa. 19111-5094 H. Interim Changes and Classified Specifications must be obtained by submitting a request on DD Form 1425 to NAVSUP-WSS. 6.2 Notice To Distributors/Offerors - Consideration for award of contract shall be given only to authorized distributors of the original manufacturer's item represented in this solicitation. If you desire to be considered as a potential source for award of this contract, proof of being an authorized distributor shall be provided on company letterhead signed by a responsible company official and sent with your offer to the Procurement Contracting Officer. 6.3 In accordance with OPNAVINST 5510.1 all documents and drawings provided by the U.S. Navy to perspective Contractors must include a "Distribution Statement" to inform the contractor of the limits of distribution, and the safeguarding of the information contained on those documents and drawings. There are 7 (seven) seperate distribution statement codes used for non-classified documents and drawings. The definition for each is as follows: A... approved for public release; distribution is unlimited. B... distribution authorized to US Governments agencies only. C... distribution authorized to US Government agencies and their contractors. D... distribution authorized to DoD and DoD contractors only. E... distribution authorized to DoD Components only. F... further distribution only as directed by Commander, Naval Sea Systems Command, code 09T. X... distribution is authorized to US Government agencies and private individuals or enterprises eligible to obtain export controlled technical data in accordance with OPNAVINST 5510.161.