Inactive

Inactive

NSN 1H-5995-012647269, TDP VER 019, QTY 141 EA, DELIVERY FOB ORIGIN. This part requires engineering source approval by the design control activity in order to maintain the quality of the part. Existin... NSN 1H-5995-012647269, TDP VER 019, QTY 141 EA, DELIVERY FOB ORIGIN. This part requires engineering source approval by the design control activity in order to maintain the quality of the part. Existing unique design capability, engineering skills, and manufacturing knowledge by the qualified source requires acquisition of the part from the approved source. The approved source retains data rights, manufacturing knowledge, or technical data that are not economically available to the Government, and the data or knowledge is essential to maintaining the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. The qualification procedures must be approved by the Government engineering activity having jurisdiction over the part in the intended application. The proposed contract action is for supplies or services for which the Government intends to solicit and negotiate with only one source under the authority of FAR 6.302-1. That source is Cage 0F1X1, Ordnance Technology Services Inc. All responsible sources may identify their interest and capability to respond to the requirement or submit proposals, quotations or capability statements. This notice of intent is not a request for competitive proposals. However, all proposals received within 30 days after date of publication of this synopsis will be considered by the Government. A determination by the Government not to compete with this proposed contract based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. Based upon market research, the Government is not using the policies contained in FAR Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. However, interested persons may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item within 15 days of this notice.

Inactive

ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)|19|||||||||||||||||||| HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT (NAVICP REVIEW FEB 1991)(FEB 1999)|1|ISO9001| INSPECTION OF SUPPLIES--FIXED-PRICE (... ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)|19|||||||||||||||||||| HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT (NAVICP REVIEW FEB 1991)(FEB 1999)|1|ISO9001| INSPECTION OF SUPPLIES--FIXED-PRICE (AUG 1996)|2||| PRODUCTION LOT TESTING|1|30| TIME OF DELIVERY (JUNE 1997)|20|0001|141|425|||||||||||||||||| STOP-WORK ORDER (AUG 1989)|1|| WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)|16|INVOICE AND RECEIVING REPORT (COMBO)|N/A|TBD|N00104|TBD|TBD|SEE SCHEDULE|TBD|||TBD|||||N/A| NAVY USE OF ABILITYONE SUPPORT CONTRACTOR - RELEASE OF OFFEROR INFORMATION (3-18))|1|WSS-N00104| EQUAL OPPORTUNITY (SEP 2016)|2||| INTEGRITY OF UNIT PRICES (NOV 2021)|1|X| EQUAL OPPORTUNITY FOR VETERANS (JUN 2020)|4||||| EQUAL OPPORTUNITY FOR WORKERS WITH DISABILITIES (JUN 2020)|2||| ALTERNATE A, ANNUAL REPRESENTATIONS AND CERTIFICATIONS (NOV 2023)|13|X|X|||X||||||||| ANNUAL REPRESENTATIONS AND CERTIFICATIONS (FEB 2024)|13|335931|500|X|X|X||||||||| TYPE OF CONTRACT (APR 1984)|1|FIRM FIXED PRICE| NOTICE OF PRIORITY RATING FOR NATIONAL DEFENSE, EMERGENCY PERPARDENESS, AND ENRGY PROGAM USE (APRIL 2008))|2||X| Proposals submitted via NECO are not acceptable. Vendors must complete, sign and return a copy of the RFP by including it as an attachment to an email directed to the Contract Specialist at tonya.nearhood1@navy.mil. Government Source Inspection and Acceptance of material is required prior to final shipment. If the point of inspection and acceptance is different than your address above, please provide specific locations for each. __________________________ - Inspection of Material. __________________________ - Packaging Inspection & Final Acceptance. Required delivery is 425 days. Please include a proposed delivery schedule in Section F, Clause 52.211-8. Incremental shipments are encouraged. All contractual documents (i.e. Contracts, Purchase orders, Task Orders, Delivery Orders and Modifications) related to the instant procurement are considered to be "Issued" by the Government when copies are either deposited in the mail, transmitted by Facsimile, or sent by other electronic commerce methods such as email. The Government's acceptance of the contractor's proposal constitutes bilateral ageement to "Issue" contractual documents as detailed herein. Any contract resulting from this solicitation will be issued bi-laterally requiring the contractor's written acceptance prior to execution. \ 1. SCOPE 1.1 This contract/purchase order contains the requirements for manufacture and the contract quality requirements for the CABLE ASSEMBLY,SPEC . 2. APPLICABLE DOCUMENTS 2.1 Applicable Documents - The document(s) listed below form a part of this contract/purchase order including modifications or exclusions. 2.1.1 Documents, drawings, and publications supplied are listed under "Drawing Number". These items should be retained until an award is made. 2.1.2 "Document References" listed below must be obtained by the Contractor. Ordering information is included as an attachment to this contract/purchase order. 2.2 Order of Precedence - In the event of a conflict between the text of this contract/purchase order and the references and/or drawings cited herein, the text of this contract/purchase order shall take precedence. Nothing in this contract/purchase order, however, shall supersede applicable laws and regulations unless a specific exemption has been obtained. 2.3 Identification of Classified Documents - This contract/purchase order requires the Contractor to have authorized access to classified documents in accordance with the attached Contract Security Classification Specification (DD Form 254). The classified documents and security level are: ;IAW DWG 5894148 rev J para 3.2.1.1DWG 5759651 requires dd254.; DRAWING DATA=15252 |10001| -|WS |D|0000.I | -|49998|0017894 DRAWING DATA=15252 |10001| -|WS |D|0000.II | -|49998|0022083 DRAWING DATA=15252 |10001| -|WS |D|0001 | -|49998|0022449 DRAWING DATA=15252 |10001| -|WS |D|0002 | -|49998|0039075 DRAWING DATA=15252 |10001| -|WS |D|0003 | -|49998|0039563 DRAWING DATA=15252 |10001| -|WS |D|0004 | -|49998|0032743 DRAWING DATA=15252 |10001| -|WS |D|0005 | -|49998|0035391 DRAWING DATA=15252 |10001| -|WS |D|0006 | -|49998|0041103 DRAWING DATA=15252 |10001| -|WS |D|0007 | -|49998|0040455 DRAWING DATA=15252 |10001| -|WS |D|0008 | -|49998|0036962 DRAWING DATA=15252 |10001| -|WS |D|0009 | -|49998|0054705 DRAWING DATA=2505790 |10001| E|FN |D|0001 | E|49998|0055085 DRAWING DATA=2505791 |10001| E|FN |D|0001 | E|49998|0056184 DRAWING DATA=2507660 |10001| J|FN |D|0001 | J|49998|0087605 DRAWING DATA=2508929 |10001| D|FN |D|0001 | D|49998|0056875 DRAWING DATA=5727489 |53711| R|FN |D|0001 | R|49998|0196266 DRAWING DATA=5727490 |53711| Y|FN |D|0001 | Y|49998|0345813 DRAWING DATA=5894148 |53711| J|DOC|D|0001 | J|49998|0213481 DRAWING DATA=5906555 |53711| G|FN |D|0001 | G|49998|0273323 DRAWING DATA=5906556 |53711| B|FN |D|0001 | B|49998|0052778 DRAWING DATA=6105225 |53711| D|FN |D|0001 | D|49998|0053443 DRAWING DATA=6105238 |53711| D|FN |D|0001 | D|49998|0055291 DRAWING DATA=6105298 |53711| N|FN |D|0001 | N|49998|0143117 DRAWING DATA=6105298 |53711| M|PL |D|0001 | M|49998|0027127 DRAWING DATA=6105310 |53711| B|FN |D|0001 | B|49998|0049123 DRAWING DATA=6105311 |53711| D|FN |D|0001 | D|49998|0059804 DRAWING DATA=6105323 |53711| C|FN |D|0001 | C|49998|0060916 DRAWING DATA=6105330 |53711| E|FN |D|0001 | E|49998|0057745 DRAWING DATA=6105331 |53711| D|FN |D|0001 | D|49998|0056386 DRAWING DATA=6239880 |53711| C|FN |D|0001 | C|49998|0181784 DRAWING DATA=6239881 |53711| A|FN |D|0001 | A|49998|0038710 DRAWING DATA=6239881 |53711| A|FN |D|0002 | A|49998|0025455 DRAWING DATA=6239881 |53711| A|FN |D|0003 | A|49998|0029623 DRAWING DATA=6239881 |53711| A|FN |D|0004 | A|49998|0022958 DRAWING DATA=6239881 |53711| A|FN |D|0005 | A|49998|0026582 DRAWING DATA=6239881 |53711| A|FN |D|0006 | A|49998|0025696 DRAWING DATA=6239881 |53711| A|FN |D|0007 | A|49998|0027845 DRAWING DATA=6239881 |53711| A|FN |D|0008 | A|49998|0022382 DRAWING DATA=6239882 |53711| A|FN |D|0001 | A|49998|0038669 DRAWING DATA=6239882 |53711| A|FN |D|0002 | A|49998|0026068 DRAWING DATA=6239882 |53711| A|FN |D|0003 | A|49998|0027259 DRAWING DATA=6239882 |53711| A|FN |D|0004 | A|49998|0029032 DRAWING DATA=6370928 |53711| A|FN |D|0001 | A|49998|0113604 DRAWING DATA=6370928 |53711| A|FN |D|0002 | A|49998|0073756 DRAWING DATA=6370928 |53711| A|FN |D|0003 | A|49998|0087005 DRAWING DATA=6370928 |53711| A|FN |D|0004 | A|49998|0074493 DRAWING DATA=6370928 |53711| A|FN |D|0005 | A|49998|0089297 DRAWING DATA=6370928 |53711| A|FN |D|0006 | A|49998|0085026 DRAWING DATA=6370928 |53711| A|FN |D|0007 | A|49998|0074676 DRAWING DATA=6370928 |53711| A|FN |D|0008 | A|49998|0036940 DRAWING DATA=6370928 |53711| 1|1N |D|0001 | 1|49998|0085282 DRAWING DATA=6370928 |53711| 1|1N |D|0002 | -|49998|0039017 DRAWING DATA=6370928 |53711| 1|1N |D|0003 | -|49998|0028306 DRAWING DATA=6370928 |53711| 1|1N |D|0004 | -|49998|0037480 DRAWING DATA=6370928 |53711| 1|1N |D|0005 | -|49998|0034739 DRAWING DATA=6370928 |53711| 1|1N |D|0006 | -|49998|0033302 DRAWING DATA=6370928 |53711| 1|1N |D|0007 | -|49998|0024011 DRAWING DATA=6657093 |53711| A|FN |D|0001 | A|49998|0071141 DOCUMENT REF DATA=MIL-STD-129 | | |P |041029|A| |03| DOCUMENT REF DATA=ISO9001 | | | |010417|A| | | DOCUMENT REF DATA=MIL-STD-973 | | | |950113|A| |03| 3. REQUIREMENTS 3.1 ;This part requires engineering source approval by the design control activity in order to maintain the quality of the part. Existing unique design capability, engineering skills, and manufacturing knowledge by the qualified source(s) require acquisition of the part from the approved source(s). The approved source(s) retain data rights, manufacturing knowledge, or technical data that are not economically available to the Government, and the data or knowlege is essential to maintaining the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approvd by the cognizant Government engineering activity. The qualification procedures must be approved by the Government engineering activity having jurisdiction over the part in the intended application. Contractors are cautioned that award of this contract/purchase order will not be delayed solely for the purpose of approving additional sources. Contractors desiring to qualify under the Engineering Source Approval Qualification (ESAQ) program are urged to contact the Government design control activity to arrange for test and, if approved, added to the (ESAQ) list of approved sources for subsquent procurements. ISEA POC: Naval Undersea Warfare Center Division Newport, 1176 Howell St., Newport, RI 02841-1708; Patrick Faerber, 401-832-4593.; 3.2 Design, Manufacture, and Performance - Except as modified herein, the CABLE ASSEMBLY,SPEC furnished under this contract/purchase order shall meet the design, manufacture, and performance requirements specified on drawing ;6105298; cage ;53711; . 3.3 Marking - This item shall be physically identified in accordance with ;MIL-STD-129; . 3.4 Configuration Control - MIL-STD-973 entitled "Configuration Management", Paragraph 5.4.8, Configuration Control (Short Form Procedure), is hereby incorporated. The Contractor shall submit all Engineering Change Proposals in accordance with MIL-STD-973, Paragraph 5.4.8.2 and Appendix D. Requests for Deviations shall be processed in accordance with MIL-STD-973, Paragraph 5.4.8.3 and Appendix E. Requests for Waivers shall be processed in accordance with MIL-STD-973, Paragraph 5.4.8.4 and Appendix E. (Original and two copies shall be submitted to Contracting Officer, NAVICP-MECH, P. O. Box 2020, Mechanicsburg Pa. 17055-0788.) 3.4.1 Configuration Control - When the Contractor has received authorization on a prior contract for the same NSN for the use of a drawing of a later revision status, that authorization is hereby extended to all succeeding contracts/purchase orders until another drawing revision is approved. The Contractor will notify the PCO of this occurrence in each instance, in the response to the solicitation. Such notification shall be in writing setting forth the contract under which the prior authorization was granted, the date of the granting of the authorization, and the name of the granting authority. Contractors shall also refer technical inquiries (other than those covered by MIL-STD-973) on company letterhead signed by a responsible company official, with copies distributed as stated below. The original and two copies of all Contractor generated correspondence regarding configuration shall be submitted to Contracting Officer, NAVICP-MECH, P.O. Box 2020, Mechanicsburg, PA 17055-0788. Contractors are cautioned that implementing engineering changes, waivers, deviations or technical inquiries into the contract/purchase order without approval of the Contracting Officer will be at the sole risk of the Contractor. 3.5 Mercury Free - The material supplied under this contract/purchase order is intended for use on submarines/surface ships and therefore shall contain no metallic mercury and shall be free from mercury contamination. Mercury contamination of the material will be cause for rejection. If the inclusion of metallic mercury is required as a functional part of the material furnished under this contract, the Contractor shall obtain written approval from the Procurement Contracting Officer before proceeding with manufacture. The contractor's request shall explain in detail the requirements for mercury, identify specifically the parts to contain mercury, and explain the method of protection against mercury escape. Such a request will be forwarded directly to the Procurement Contracting Officer with a copy to the applicable Government Inspector. Upon approval by the Contracting Officer, the vendor will provide a "Warning Plate" stating that metallic mercury is a functional part of the item and will include name and location of that part. The use of mercury, mercury compounds, or mercury-bearing instruments and/or equipment in a manner which might cause contamination in the manufacture, assembly, or test of material on this contract is prohibited. The most probable causes of contamination are direct-connected manometers, mercury vacuum pumps, mercury seals, or the handling of mercury in the immediate vicinity. Mercury switches, mercury in glass thermometers, standard cells and other items containing mercury may be used if they are located so as not to constitute a contamination hazard. If external contamination by metallic mercury occurs or is suspected, the following test may be used to determine whether contamination by metallic mercury exists or whether corrective cleaning measures have been effective. Enclose the equipment in a polyethylene bag or close-fitting airtight container for eight hours at room temperature (70 degrees F minimum).Sample the trapped air and if mercury vapor concentration is 0.01 mg/cu meter or more, the material is mercury contaminated insofar as the requirements of this contract are concerned. These requirements shall be included in any subcontract or purchase order hereunder and the Contractor shall insure SubContractor compliance with these requirements. Technical questions pertaining to these requirements shall be referred to the Procurement Contracting Officer via the cognizant Administrative Contracting Officer. For background, the following information is provided: Mercury is corrosive to gold, silver, nickel, stainless steels, aluminum and copper alloys. Stainless steels, nickel, and copper alloys are widely used in reactor plants and other submarine/surface ship systems. Accidental trapping of mercury in a component could cause serious damage to vital parts. Mercury is also toxic if inhaled, ingested, or absorbed through the skin. It is evident that grave consequences could result from small amounts of mercury vapor present in an unreplenished submarine/surface ship atmosphere. 3.6 First Article Approval (Contractor Testing) - First Article Test (FAT) and approval is required. 3.7 Security Clearance Required - This contract/purchase order requires the Contractor to have a Government Security Clearance in accordance with the attached Contract Security Classification Specification (DD Form 254). 3.8 Production Lot Approval (Contractor Testing) - Production Lot Test and approval is required. 3.9 ;To become a qualified manufacturer of any of the cables listedabove, the contractor must manufacture two (2) each of the 5W1,5W2, 5W7, and 5W8 Cable Assemblies and test them IAW therequirements of specification 53711-5894148, REV J.; 3.10 Serialization - The supplier shall mark a serial number on each CABLE ASSEMBLY,SPEC in accordance with ;IAW DWG 6105298 rev "N". note 23 IAW 5894148 REV J para 3.3.4; . Actual serial numbers will be assigned ;APPLY A GOVERNMENT SERIAL NUMBER TO EACH UNIT MANUFACTURED.SERIAL NUMBER SHALL BE OBTAINED FROM COMMANDER, NUWC DIVISIONNEWPORT, NEWPORT, RI 02841-1708.Serial numbers are now obtainedfrom NUWC Newport by sending NUWC_NPT_SERIALNUMBERS@NAVY.MIL; . 3.11 Marking - This assembly and its piece parts shall be physically identified in accordance with MIL-STD-130. 4. QUALITY ASSURANCE 4.1 Responsibility for Inspection - Unless otherwise specified in the contract/purchase order, the Contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contract/purchase order, the Contractor may use his own or any other facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements. 4.2 Quality System Requirements - The supplier shall provide and maintain a quality system acceptable to the Government. The quality system requirements shall be in accordance with ISO 9001. 4.2.1 ;Suppliers currently using and maintaining Inspection System Requirements to MIL-I-45208 are granted permission to utilize this if desired.; 4.3 Responsibility for Compliance - All items must meet all requirements of this contract/purchase order. The inspection set forth in this specification shall become a part of the Contractor's overall inspection system or quality program. The absence of any inspection requirements shall not relieve the Contractor of the responsibility of assuring that all products or supplies submitted to the Government for acceptance comply with all requirements of the contract/purchase order. Sampling in quality conformance does not authorize submission of known defective material, either indicated or actual, not does it commit the Government to acceptance of defective material. 4.4 Records of Inspection - (This requirement is not applicable to Government Purchase Orders) Records of all inspection work performed by the Contractor, as referenced elsewhere in this contract, shall be kept complete and available to the Government during the performance of the contract and for a period of four years after final delivery of supplies. 4.5 ;FAT testing, All CDRLS and Production Lot testing has been waived for OTSI.; 4.6 Production Lot Test (Contractor) - The Contractor shall perform Production Lot Testing in accordance with ;IAW DWG 5894148 REV J. Preproduction Sample - A preproduction sample of two (2) each of the5W1, 5W2, 5W7 and 5W8 Cable Assemblies shall be manufactured using themethods and procedures proposed for production. The sample shall be tested as specified in specification 53711-5894148, Section 4, for the purpose of determining that thecontractor, prior to starting production,is capable of producing items that comply with the design and the technical requirements of the contract. If, after submission of the preproduction sample, a design change is made to the Cable Assembly sufficient to affect its safety, life, or operational characteristics, or substantially altered facilities are used in production, a new preproduction sample shall be manufactured by the contractor and tested as specified in specification 53711-5894148, Section 4. In-water /Dynamometer Test: Cable Assemblies being supplied by new vendors for qualification efforts or Cable Assemblies with major design changes will be subjected to in-water test runs and/or dynamometer test runs and becapable of satisfying all performance requirements. The types and number of in-water test runs and/or dynamometer test runs will be determined, on an individual case basis, by the Government. The requirement for in-water testruns and/or dynamometer test runs may be waived, on an individual case basis,at the option of the Government.(This system level testing is conducted by the Government.); . 4.7 Quality Conformance Inspection - The contractor is responsible for conducting a Quality Conformance Inspection in accordance with ;Quality Conformance Inspection IAW DWG 5894148 Rev J paragraph 4.2; , paragraph ;Paragraph 4.2.1.3 Documentation. ; and preparing an inspection report in accordance with the Contract Data Requirements List, DD Form 1423. 5. PACKAGING 5.1 Preservation, Packaging, Packing and Marking - Preservation, Packaging, Packing and Marking shall be in accordance with the Contract/Purchase Order Schedule and as specified below. MIL-STD 2073 PACKAGING APPLIES AS FOUND ELSEWHERE IN THE SCHEDULE 6. NOTES 6.1 Ordering Information for Document References - The Department of Defense Single Stock Point (DODSSP), Website http://www.dsp.dla.mil/, provides product information for the Department Of Defense Index Of Specifications and Standards (DODISS) (i.e.Military/Federal Specifications and Standards), Data Item Descriptions (DIDs), and other DODSSP Products. A. Availability of Cancelled Documents - The DODSSP offers cancelled documents that are required by private industry in fulfillment of contractual obligations in paper format. Documents can be requested by phoning the Subscription Services Desk. B. Commercial Specifications, Standards, and Descriptions - These specifications, standards and descriptions are not available from Government sources. They may be obtained from the publishers of the applicable societies. C. Ordnance Standards (OS), Weapons Specifications (WS), and NAVORD OSTD 600 Pages - These type publications may be obtained by submitting a request to: Commander, Indian Head Division, Naval Surface Warfare Center Code 8410P, 101 Strauss Avenue Indian Head, MD 20640-5035 D. On post-award actions, requests for "Official Use Only" and "NOFORN" (Not Releasable To Foreign Nationals) documents must identify the Government Contract Number, and must be submitted via the cognizant Defense Contract Management Command (DCMC) for certification of need for the document. On pre-award actions such requests must be submitted to the PCO for certification of need for the document. E. NOFORN Military Specifications and Standards (including Amendments, Change Notices and Supplements, but NOT interim Changes) to be ordered from: Contracting Officer NAVICP-MECH Code 87321 5450 Carlisle Pike P.O. Box 2020 Mechanicsburg, Pa. 17055-0788 F. Nuclear Reactor Publications Assigned NAVSEA Documents and Identification Numbers (i.e. NAVSEA Welding Standard, NAVSEA 250-1500-1) are to be ordered from: Commanding Officer NAVICP-MECH Code 009 5450 Carlisle Pike P.O. Box 2020 Mechanicsburg, Pa. 17055-0788 G. Technical Manuals Assigned NAVSEA Identification Numbers (i.e. NAVSEA Welding And Brazing Procedure, NAVSEA S9074-AQ-GIB-010/248) are to be ordered from: Naval Inventory Control Point Code 1 Support Branch 700 Robbins Avenue Phildelphia, Pa. 19111-5094 H. Interim Changes and Classified Specifications shall be obtained by submitting a request on DD Form 1425 to NAVICP-MECH. 6.2 ;The classified documents and security level are: IAW DWG 5894148 rev J para 3.2.1.1; DWG 5759651 requires dd254.; DATE OF FIRST SUBMISSION=030 DAC ;Preproduction tests are those tests performed on the sampleselected as specified in 4.2.1.1 to verify that the requirementsof this specification are met prior to the start of production.The preproduction tests are detailed in Figures 2 and 3. ; DATE OF FIRST SUBMISSION=ASREQ ;Copies of the Certificate of Quality Compliance CDRLs shall bedelivered to the Engineering Support Activity, NUWC Newport: NWPT.NUWC_8554_QAPCDRL@navy.mil james.c.ferguson1.civ@us.navy.mil patrick.r.faerber.civ@us.navy.mil Recommend a Post Award Conference be conducted with the contractorsupplier to review the item Key Features. The governmentEngineering Support Activity, NUWC Newport, would like toparticipate in the conference if one is scheduled. ; DATE OF FIRST SUBMISSION=ASREQ Submit before material delivery a Certificate of Compliance per DI-MISC-81356 to Block 14 addresses. A separate Certificate of Compliance shall be prepared and submitted for each unique combination of Contract/Purchase Order Number, National Stock Number and Item Nomenclature specified in the schedule of Supply/Services. ;Copies of the Certificate of Quality Compliance CDRLs shall bedelivered to the Engineering Support Activity, NUWC Newport: NWPT.NUWC_8554_QAPCDRL@navy.mil james.c.ferguson1.civ@us.navy.mil patrick.r.faerber.civ@us.navy.mil Recommend a Post Award Conference be conducted with the contractorsupplier to review the item Key Features. The governmentEngineering Support Activity, NUWC Newport, would like toparticipate in the conference if one is scheduled. ; DATE OF FIRST SUBMISSION=030 DAC ;Copies of the Certificate of Quality Compliance CDRLs shall bedelivered to the Engineering Support Activity, NUWC Newport: NWPT.NUWC_8554_QAPCDRL@navy.mil james.c.ferguson1.civ@us.navy.mil patrick.r.faerber.civ@us.navy.mil Recommend a Post Award Conference be conducted with the contractorsupplier to review the item Key Features. The governmentEngineering Support Activity, NUWC Newport, would like toparticipate in the conference if one is scheduled. ;