Inactive

NSN 7H-2090-016536128, TDP VER 002, QTY 1 EA, DELIVERY FOB ORIGIN. This Synopsis is for the anticipated REPAIR of 1 each NSN 7HH 2090 016536128 in accordance with Reference number 556-7107927-46.Repla... NSN 7H-2090-016536128, TDP VER 002, QTY 1 EA, DELIVERY FOB ORIGIN. This Synopsis is for the anticipated REPAIR of 1 each NSN 7HH 2090 016536128 in accordance with Reference number 556-7107927-46.Replacement or new procurement will not be considered. The Government does not own the drawings or data rights to this NSN. It has been determined to be uneconomical to buy the data or rights to the data. It is uneconomical to reverse engineer the part. This code is used when the Government did not initially purchase the data and/or rights. The Government does not own the data or the rights to the data needed to purchase / contract repair of this part from additional sources. It has been determined to be uneconomical to buy the data or rights to the data. It is uneconomical to reverse engineer the part. Interested parties may obtain copies of Military and Federal Specifications and Standards, Qualified Products Lists (QPLs), Qualified Product Databases (QPDs), Military Handbooks, and other standardized documents from the DoD Single Stock Point (DODSSP) at Document Automation and Production Service (DAPS) in Philadelphia, PA. NOTE: Patterns, Drawings, Deviation Lists, Purchase Descriptions, etc. are NOT stocked at DODSSP. Most documents are available in Adobe PDF format from ASSIST-Online at: http://quicksearch.dla.mil/. Users may use ASSIST-Quick Search to search for and download available documents directly using standard browser software. Documents that are not available for downloading from ASSIST-Quick Search can be ordered from the DODSSP website using the ASSIST Shopping Wizard after obtaining a DODSSP Customer Account by following the registration procedures. Users who do not have access to the internet may contact the DODSSP ASSIST Help Desk at 215-697-2667 or 215-697-2179(DSN: 442-2667), or mail their requestDLA Document Services, Bldg. 4/D, 700 Robbins Avenue, Philadelphia PA 19111-5094. The proposed contract action is for supplies or services for which the Government intends to solicit and negotiate with only one source under the authority of FAR 6.302-1. All responsible sources may identify their interest and capability to respond to the requirement or submit proposals, quotations or capability statements. This notice of intent is not a request for competitive proposals. However, all proposals received within 45 days (30 days if award is issued under an existing Basic Ordering Agreement (BOA) after date of publication of this synopsis will be considered by the Government. A determination by the Government not to compete with this proposed contract based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. Award will be made only if the offeror, the product/service, or the manufacturer meets the qualification requirement(s) at time of award, in accordance with FAR clause 52.209-1. The solicitation identifies the office where additional information can be obtained concerning qualification requirements and is cited in each individual solicitation. Based upon market research, the Government is not using the policies contained in FAR Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. However, interested persons may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item within 15 days of this notice. One or more of the items under this acquisition is subject to: Free Trade Agreements, if DFARS clause 252.225-7036 Buy American Act--Free Trade Agreements--Balance of Payments Program, is included in the solicitation. The World Trade Organization Government Procurement Agreement and Free Trade Agreements, if DFARS clause 252.225-7021 Trade Agreements, is included in the solicitation.

Inactive

CONTACT INFORMATION|4|N741.2|GDH|717-605-7751|STEVE.SMITHEY@NAVY.MIL| ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)|19|||||||||||||||||||| INSPECTION OF SUPPLIES--FIXED-PRICE (AUG 1996)|2||| WID... CONTACT INFORMATION|4|N741.2|GDH|717-605-7751|STEVE.SMITHEY@NAVY.MIL| ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)|19|||||||||||||||||||| INSPECTION OF SUPPLIES--FIXED-PRICE (AUG 1996)|2||| WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)|16|INVOICE AND RECEIVING REPORT (COMBO)|N/A|TBD|TBD|TBD|TBD|TBD|TBD|N/A|N/A|TBD|||||| NAVY USE OF ABILITYONE SUPPORT CONTRACTOR - RELEASE OF OFFEROR INFORMATION (3-18))|1|WEAPON SYSTEM SUPPORT| EQUAL OPPORTUNITY (SEP 2016)|2||| BUY AMERICAN --FREE TRADE AGREEMENTS--BALANCE OF PAYMENTS PROGRAM - BASIC (FEB2024))|11|||||||||||| ALTERNATE A, ANNUAL REPRESENTATIONS AND CERTIFICATIONS (NOV 2023)|13|||||||||||||| BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024))|5|||||| BUY AMERICAN-BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024)|1|| ANNUAL REPRESENTATIONS AND CERTIFICATIONS (FEB 2024)|13|336611|1,300|||||||||||| NOTICE OF PRIORITY RATING FOR NATIONAL DEFENSE, EMERGENCY PERPARDENESS, AND ENRGY PROGAM USE (APRIL 2008))|2||| THE PURPOSE OF THIS AMENDMENT IS TO UPDATE THE FOLLOWING: THE CLOSING DATE FOR QUOTES IS HEREBY UDPATED TO 10 APRIL 2025. ALL OTHER TERMS AND CONDITIONS REMAIN THE SAME. THE PURPOSE OF THIS AMENDMENT IS TO HEREBY UPDATE THE FOLLOWING: THE CLOSING DATE FOR QUOTES IS HEREBY EXTENDED TO CLOSE ON 28 FEBRUARY 2025. ALL OTHER TERMS AND CONDITIONS REMAIN THE SAME. 1. This solicitation is for the REPAIR of 1 each NSN 7HH 2090 016536128 in accordance with Reference number 556-7107927-46.Replacement or new procurement will not be considered. The Government does not own the drawings or data rights to this NSN. It has been determined to be uneconomical to buy the data or rights to the data. It is uneconomical to reverse engineer the part. This code is used when the Government did not initially purchase the data and/or rights. 2. Government-Source Inspection and Acceptance (G-S I&A) is required. If the G-S I&A will occur at a different CAGE from the Admin Award CAGE, please provide the repair facility CAGE and/or packaging CAGE with the quote. 3. MIL-STD Packaging is required and it will not be waived. 4. Please provide the following information in the repair quote: A. Your CAGE (used as the awardee CAGE):___________________ B. the unit repair price: $____________________________________ and whether this price is firm-fixed price (FFP)_____; or estimated (EST)______ C. Repair turn-around me (number of days from receipt of asset(s) to shipment of repaired asset(s):_______DAYS D. Throughput Constraint: _____/month. Refers to the total assets to be repaired monthly after initial delivery commences. A throughput of 0000/month reflects no throughput constraint. E. The new procurement cost of this NSN (if known): $________________________ F. Is this item (NSN) OBSOLETE: YES____ or NO _____ G. The repair CAGE _____________ and packaging CAGE___________ (as described in #2). PLEASE NOTE THE FOLLOWING WHEN GENERATING YOUR QUOTE: We are requesting that the quote's validity extend for 8 months from the submitted proposal date. Teardown and evaluation only quotes will NOT be accepted. Induction Expiration Date: 120 days after the date of subsequent award. Any asset received after this date in days is not authorized to be repaired without bi-lateral agreement between the vendor and Contracting Officer. If Firm-Fixed Repair Pricing is provided, Beyond Economical Repair (BER) does not exist. With DCMA concurrence, Beyond Repair (BR) is possible. If the unit is determined BR, the unit price will negotiated downward from the awarded Firm-Fixed Repair price. Repair Turnaround Time (RTAT): the resultant contractual delivery requirement is measured from asset Return to the date of asset acceptance under the terms of the contract. For purposes of this section, Return is defined as physical receipt of the F-condition asset at the contractor's facility as reflected in the Action Date entry in the Commercial Asset Visibility (CAV) system. In accordance with the CAV Statement of Work, the contractor is required to accurately report all transactions by the end of the fifth regular business day after receipt and the Action Date entered in CAV must be dated to reflect the actual date of physical receipt. The Contractor must obtain final inspection and acceptance by the Government for all assets within the RTATs established in this contract. Requested RTAT: 90 Days Proposals shall reference the proposed RTAT and any capacity constraints. 5. Since there is only one business concern capable of performing repairs on this NSN, the Small Business Set-Aside requirement has been dissolved. 6. All contractual documents (i.e. contracts, purchase orders, task orders, delivery orders and modifications)related to the instant procurement are considered to be "issued" by the Government when copies are either deposited in the mail, transmitted by facsimile, or sent by other electronic commerce methods, such as email. The Government's acceptance of the contractor's proposal constitutes bilateral agreement to "issue" contractual documents as detailed herein. 7. Please submit a repair quote to Steve Smithey via email: STEVE.SMITHEY@NAVY.MIL. This is the only submission method authorized. All other delivery methods (i.e., fax, NECO, etc.) will not be accepted. 8. Please read this solicitation in its entirety. Please direct questions regarding this solicitation to the point of contact: Steve.Smithey@Navy.mil. 9. The resultant award of this solicitation will be issued bilaterally, requiring the contractor's written acceptance prior to execution. 10. This is a rated order certified for national defense use, and the Contract will follow all the requirements of the Defense Priorities and Allocations System regulation (15 CFR 700). 1. SCOPE 1.1 This contract/purchase order contains the requirements for repair and the contract quality requirements for the CYLINDER,DUPLEX . 2. APPLICABLE DOCUMENTS 2.1 Applicable Documents - The document(s) listed below form a part of this contract/purchase order including modifications or exclusions. 2.1.1 "Document References" listed below must be obtained by the Contractor. Ordering information is included as an attachment to this contract/purchase order. DRAWING DATA=ADJUCATION |53711| -|!N |D|0001 | -|49998|0224368 DRAWING DATA=H642-6930A01 |53711| B|ER |D|0001 | B|49998|0050529 DRAWING DATA=H642-6930A03 |53711| A|ER |D|0001 | A|49998|0044381 DRAWING DATA=H642-6930A03 |53711| A|ER |D|0002 | A|49998|0045278 DRAWING DATA=H642-6930A03 |53711| A|ER |D|0003 | A|49998|0042116 DRAWING DATA=H642-6930A03 |53711| A|ER |D|0004 | A|49998|0040426 DRAWING DATA=H642-6930A04 |53711| A|ER |D|0001 | A|49998|0044478 DRAWING DATA=H642-6930A04 |53711| A|ER |D|0002 | A|49998|0020567 DRAWING DATA=H642-6930A04 |53711| A|ER |D|0003 | A|49998|0049284 DRAWING DATA=H642-6930A04 |53711| A|ER |D|0004 | A|49998|0069925 DRAWING DATA=H642-6930A04 |53711| A|ER |D|0005 | A|49998|0045466 DRAWING DATA=H642-6930A04 |53711| A|ER |D|0006 | A|49998|0043169 DRAWING DATA=H642-6930A06 |53711| A|ER |D|0001 | A|49998|0044793 DRAWING DATA=H642-6930A06 |53711| A|ER |D|0002 | A|49998|0018307 DRAWING DATA=H642-6930A06 |53711| A|ER |D|0003 | A|49998|0049122 DRAWING DATA=H642-6930A06 |53711| A|ER |D|0004 | A|49998|0068094 DRAWING DATA=H642-6930A06 |53711| A|ER |D|0005 | A|49998|0045471 DRAWING DATA=H642-6930A06 |53711| A|ER |D|0006 | A|49998|0044247 DRAWING DATA=H642-6930A06 |53711| A|ER |D|0007 | A|49998|0106199 DRAWING DATA=H642-6930A08 |53711| A|ER |D|0001 | A|49998|0046508 DRAWING DATA=H642-6930A08 |53711| A|ER |D|0001.1 | A|49998|0031027 DRAWING DATA=H642-6930A08 |53711| A|ER |D|0001.2 | A|49998|0017479 DRAWING DATA=H642-6930A08 |53711| A|ER |D|0002 | A|49998|0034913 DRAWING DATA=H642-6930A08 |53711| A|ER |D|0003 | A|49998|0068147 DRAWING DATA=H642-6930A08 |53711| A|ER |D|0004 | A|49998|0062975 DRAWING DATA=H642-6930A08 |53711| A|ER |D|0005 | A|49998|0068255 DRAWING DATA=H642-6930A08 |53711| A|ER |D|0006 | A|49998|0043658 DRAWING DATA=H642-6930A08 |53711| A|ER |D|0007 | A|49998|0044536 DRAWING DATA=H642-6930A08 |53711| A|ER |D|0008 | A|49998|0111058 DRAWING DATA=H642-6930A09 |53711| C|ER |D|0001 | C|49998|1005340 DRAWING DATA=H642-6930A11 |53711| A|ER |D|0001 | A|49998|0258692 DRAWING DATA=H642-6930A13 |53711| A|ER |D|0001 | A|49998|0163937 DRAWING DATA=H642-6930A18 |53711| A|ER |D|0001 | A|49998|0147308 DRAWING DATA=H642-6930A20 |53711| A|ER |D|0001 | A|49998|0046587 DRAWING DATA=H642-6930A22 |53711| A|ER |D|0001 | A|49998|0863142 DRAWING DATA=H642-6930A23 |53711| B|ER |D|0001 | B|49998|0610397 DRAWING DATA=H642-6930A24 |53711| B|ER |D|0001 | B|49998|0838277 DRAWING DATA=H642-6930A25 |53711| A|ER |D|0001 | A|49998|0196702 DRAWING DATA=H642-6930A30 |53711| B|ER |D|0001 | B|49998|0600504 DRAWING DATA=H642-6930A31 |53711| B|ER |D|0001 | B|49998|1076755 DRAWING DATA=H642-6930A32 |53711| D|ER |D|0001 | D|49998|0768038 DRAWING DATA=H642-6930A35 |53711| B|ER |D|0001 | B|49998|0305215 DRAWING DATA=H642-6930A46 |53711| B|ER |D|0001 | B|49998|0247917 DRAWING DATA=H642-6930A47 |53711| A|ER |D|0001 | A|49998|0079102 DRAWING DATA=H642-6930A48 |53711| A|ER |D|0001 | A|49998|0491967 DRAWING DATA=H642-6930A50 |53711| A|ER |D|0001 | A|49998|0310238 DRAWING DATA=H642-6930A52 |53711| A|ER |D|0001 | A|49998|0288640 DRAWING DATA=H642-6930A54 |53711| A|ER |D|0001 | A|49998|0307491 DRAWING DATA=H642-6930A57 |53711| A|ER |D|0001 | A|49998|0511216 DRAWING DATA=H642-6930A59 |53711| B|ER |D|0001 | B|49998|0592811 DRAWING DATA=H642-6930A60 |53711| A|ER |D|0001 | A|49998|1584349 DRAWING DATA=H642-6930A63 |53711| B|ER |D|0001 | B|49998|0630801 DRAWING DATA=H792-8003A01 |53711| A|ER |D|0001 | A|49998|0055088 DRAWING DATA=H792-8003A01 |53711| A|ER |D|0002 | A|49998|0048410 DRAWING DATA=H792-8003A01 |53711| A|ER |D|0003 | A|49998|0060553 DRAWING DATA=H792-8003A03 |53711| A|ER |D|0001 | A|49998|0064187 DRAWING DATA=H792-8003A03 |53711| A|ER |D|0002 | A|49998|0050406 DRAWING DATA=H792-8003A03 |53711| A|ER |D|0003 | A|49998|0014324 DRAWING DATA=H792-8003A03 |53711| A|ER |D|0004 | A|49998|0084235 DRAWING DATA=H792-8003A03 |53711| A|ER |D|0005 | A|49998|0080131 DRAWING DATA=H792-8003A04 |53711| B|ER |D|0001 | B|49998|0044710 DRAWING DATA=H792-8003A04 |53711| B|ER |D|0002 | B|49998|0035311 DRAWING DATA=H792-8003A04 |53711| B|ER |D|0002.1 | B|49998|0015876 DRAWING DATA=H792-8003A04 |53711| B|ER |D|0003 | B|49998|0042263 DRAWING DATA=H792-8003A04 |53711| B|ER |D|0004 | B|49998|0061038 DRAWING DATA=H792-8003A04 |53711| B|ER |D|0005 | B|49998|0061779 DRAWING DATA=H792-8003A04 |53711| B|ER |D|0006 | B|49998|0063732 DRAWING DATA=H792-8003A04 |53711| B|ER |D|0007 | B|49998|0046907 DRAWING DATA=H792-8003A04 |53711| B|ER |D|0008 | B|49998|0041937 DRAWING DATA=H792-8003A04 |53711| B|ER |D|0009 | B|49998|0045254 DRAWING DATA=H792-8003A04 |53711| B|ER |D|0010 | B|49998|0045055 DRAWING DATA=H792-8003A04 |53711| B|ER |D|0011 | B|49998|0040957 DRAWING DATA=H792-8003A04 |53711| B|ER |D|0012 | B|49998|0025991 DRAWING DATA=H792-8003A04 |53711| B|ER |D|0013 | B|49998|0099796 DRAWING DATA=H792-8003A04 |53711| B|ER |D|0014 | B|49998|0123595 DRAWING DATA=H792-8003A04 |53711| B|ER |D|0015 | B|49998|0076950 DRAWING DATA=H792-8003A04 |53711| B|ER |D|0016 | B|49998|0105653 DRAWING DATA=H792-8003A04 |53711| B|ER |D|0017 | B|49998|0109530 DRAWING DATA=H792-8003A05 |53711| A|ER |D|0001 | A|49998|0051326 DRAWING DATA=H792-8003A05 |53711| A|ER |D|0002 | A|49998|0013947 DRAWING DATA=H792-8003A05 |53711| A|ER |D|0003 | A|49998|0060749 DRAWING DATA=H792-8003A05 |53711| A|ER |D|0004 | A|49998|0058855 DRAWING DATA=H792-8003A06 |53711| A|ER |D|0001 | A|49998|0060680 DRAWING DATA=H792-8003A06 |53711| A|ER |D|0001.1 | A|49998|0017399 DRAWING DATA=H792-8003A06 |53711| A|ER |D|0002 | A|49998|0060118 DRAWING DATA=H792-8003A06 |53711| A|ER |D|0003 | A|49998|0165497 DRAWING DATA=H792-8003A07 |53711| B|ER |D|0001 | B|49998|0054229 DRAWING DATA=H792-8003A07 |53711| B|ER |D|0002 | B|49998|0045233 DRAWING DATA=H792-8003A07 |53711| B|ER |D|0003 | B|49998|0048936 DRAWING DATA=H792-8003A08 |53711| A|ER |D|0001 | A|49998|0061127 DRAWING DATA=H792-8003A08 |53711| A|ER |D|0002 | A|49998|0048055 DRAWING DATA=H792-8003A08 |53711| A|ER |D|0003 | A|49998|0060816 DRAWING DATA=H792-8003A08 |53711| A|ER |D|0004 | A|49998|0035533 DRAWING DATA=H792-8003A08 |53711| A|ER |D|0005 | A|49998|0086120 DRAWING DATA=H792-8003A08 |53711| A|ER |D|0006 | A|49998|0057007 DRAWING DATA=H792-8003A09 |53711| A|ER |D|0001 | A|49998|0065855 DRAWING DATA=H792-8003A09 |53711| A|ER |D|0001.1 | A|49998|0035126 DRAWING DATA=H792-8003A09 |53711| A|ER |D|0001.2 | A|49998|0038611 DRAWING DATA=H792-8003A09 |53711| A|ER |D|0002 | A|49998|0068307 DRAWING DATA=H792-8003A09 |53711| A|ER |D|0003 | A|49998|0083751 DRAWING DATA=H792-8003A09 |53711| A|ER |D|0004 | A|49998|0094133 DRAWING DATA=H792-8003A09 |53711| A|ER |D|0005 | A|49998|0067561 DRAWING DATA=H792-8003A09 |53711| A|ER |D|0006 | A|49998|0056720 DRAWING DATA=H792-8003A09 |53711| A|ER |D|0007 | A|49998|0059208 DRAWING DATA=H792-8003A09 |53711| A|ER |D|0008 | A|49998|0062589 DRAWING DATA=H792-8003A09 |53711| A|ER |D|0009 | A|49998|0061263 DRAWING DATA=H792-8003A09 |53711| A|ER |D|0010 | A|49998|0126281 DRAWING DATA=H792-8003A09 |53711| A|ER |D|0011 | A|49998|0165008 DRAWING DATA=H792-8003A10 |53711| D|ER |D|0001 | D|49998|0038066 DRAWING DATA=H792-8003A10 |53711| D|ER |D|0001.1 | D|49998|0021174 DRAWING DATA=H792-8003A10 |53711| D|ER |D|0001.2 | D|49998|0012131 DRAWING DATA=H792-8003A10 |53711| D|ER |D|0001.3 | D|49998|0029278 DRAWING DATA=H792-8003A10 |53711| D|ER |D|0001.4 | D|49998|0024992 DRAWING DATA=H792-8003A10 |53711| D|ER |D|0001.5 | D|49998|0036320 DRAWING DATA=H792-8003A10 |53711| D|ER |D|0001.6 | D|49998|0021219 DRAWING DATA=H792-8003A10 |53711| D|ER |D|0002 | D|49998|0055952 DRAWING DATA=H792-8003A10 |53711| D|ER |D|0003 | D|49998|0065301 DRAWING DATA=H792-8003A10 |53711| D|ER |D|0004 | D|49998|0073739 DRAWING DATA=H792-8003A10 |53711| D|ER |D|0005 | D|49998|0069417 DRAWING DATA=H792-8003A10 |53711| D|ER |D|0006 | D|49998|0065165 DRAWING DATA=H792-8003A10 |53711| D|ER |D|0007 | D|49998|0033407 DRAWING DATA=H792-8003A10 |53711| D|ER |D|0008 | D|49998|0049144 DRAWING DATA=H792-8003A10 |53711| D|ER |D|0009 | D|49998|0032833 DRAWING DATA=H792-8003A10 |53711| D|ER |D|0010 | D|49998|0093314 DRAWING DATA=H792-8003A10 |53711| D|ER |D|0011 | D|49998|0121958 DRAWING DATA=H792-8003A11 |53711| A|ER |D|0001 | A|49998|0062481 DRAWING DATA=H792-8003A11 |53711| A|ER |D|0001.1 | A|49998|0040801 DRAWING DATA=H792-8003A11 |53711| A|ER |D|0002 | A|49998|0077075 DRAWING DATA=H792-8003A11 |53711| A|ER |D|0003 | A|49998|0085945 DRAWING DATA=H792-8003A11 |53711| A|ER |D|0004 | A|49998|0050732 DRAWING DATA=H792-8003A11 |53711| A|ER |D|0005 | A|49998|0071103 DRAWING DATA=H792-8003A15 |53711| B|ER |D|0001 | B|49998|0311736 DRAWING DATA=H792-8003A18 |53711| A|ER |D|0001 | A|49998|0404617 DRAWING DATA=H792-8003A20 |53711| B|ER |D|0001 | B|49998|0576984 DRAWING DATA=H792-8003A22 |53711| B|ER |D|0001 | B|49998|0262356 DRAWING DATA=H792-8003A24 |53711| A|ER |D|0001 | A|49998|0188871 DRAWING DATA=H792-8003A30 |53711| B|ER |D|0001 | B|49998|0397631 DRAWING DATA=H792-8003A32 |53711| B|ER |D|0001 | B|49998|1665225 DRAWING DATA=H792-8003A40 |53711| A|ER |D|0001 | A|49998|0869699 DRAWING DATA=H792-8003A45 |53711| A|ER |D|0001 | A|49998|0124251 DRAWING DATA=H792-8003A46 |53711| A|ER |D|0001 | A|49998|0124495 DRAWING DATA=H792-8003A47 |53711| B|ER |D|0001 | B|49998|0439678 DRAWING DATA=H792-8003A48 |53711| A|ER |D|0001 | A|49998|0641033 DRAWING DATA=H792-8003A54 |53711| A|ER |D|0001 | A|49998|0832753 DRAWING DATA=H793-2502B07 |53711| D|ER |D|0001 | D|49998|0758404 DRAWING DATA=H793-2502B16 |53711| B|ER |D|0001 | B|49998|0821776 DRAWING DATA=H793-2502B17 |53711| A|ER |D|0001 | A|49998|0142178 DRAWING DATA=H793-2502B22 |53711| B|ER |D|0001 | B|49998|0380858 DRAWING DATA=H793-2502B23 |53711| C|ER |D|0001 | C|49998|0420934 DRAWING DATA=H793-2502B30 |53711| B|ER |D|0001 | B|49998|0327116 DRAWING DATA=H793-2502B31 |53711| A|ER |D|0001 | A|49998|0283813 DRAWING DATA=H793-2502B32 |53711| A|ER |D|0001 | A|49998|0698878 DRAWING DATA=H793-2502B35 |53711| A|ER |D|0001 | A|49998|0309331 DRAWING DATA=H793-2502B39 |53711| A|ER |D|0001 | A|49998|0456984 DRAWING DATA=H793-2502B40 |53711| A|ER |D|0001 | A|49998|0389726 DRAWING DATA=H793-2502B41 |53711| A|ER |D|0001 | A|49998|0519761 DRAWING DATA=H793-2502B42 |53711| A|ER |D|0001 | A|49998|0735748 DRAWING DATA=H793-2502B49 |53711| B|ER |D|0001 | B|49998|1741647 DRAWING DATA=NSWCPD-0062-16 |53711| -|LR |D|0001 | -|49998|0010592 DRAWING DATA=VIR-A2378 |53711| A|ER |D|0001 | A|49998|0193045 DRAWING DATA=6985454 |53711| A| |D|0000.A | A|49998|0043734 DRAWING DATA=6985454 |53711| A| |D|0001 | A|49998|0073109 DRAWING DATA=6985454 |53711| A| |D|0002 | A|49998|0034850 DRAWING DATA=6985454 |53711| A| |D|0003 | A|49998|0010505 DRAWING DATA=6985454 |53711| A| |D|0004 | A|49998|0012762 DRAWING DATA=6985454 |53711| A| |D|0005 | A|49998|0024340 DRAWING DATA=6985454 |53711| A| |D|0006.1 | A|49998|0064372 DRAWING DATA=6985454 |53711| A| |D|0006.2 | A|49998|0062132 DRAWING DATA=6985454 |53711| A| |D|0006.3 | A|49998|0066946 DRAWING DATA=6985454 |53711| A| |D|0006.4 | A|49998|0061943 DRAWING DATA=6985454 |53711| A| |D|0006.5 | A|49998|0064078 DRAWING DATA=6985454 |53711| A| |D|0006.6 | A|49998|0065658 DRAWING DATA=6985454 |53711| A| |D|0007.1 | A|49998|0024644 DRAWING DATA=6985454 |53711| A| |D|0007.10 | A|49998|0024588 DRAWING DATA=6985454 |53711| A| |D|0007.2 | A|49998|0043696 DRAWING DATA=6985454 |53711| A| |D|0007.3 | A|49998|0038697 DRAWING DATA=6985454 |53711| A| |D|0007.4 | A|49998|0036692 DRAWING DATA=6985454 |53711| A| |D|0007.5 | A|49998|0036530 DRAWING DATA=6985454 |53711| A| |D|0007.6 | A|49998|0044503 DRAWING DATA=6985454 |53711| A| |D|0007.7 | A|49998|0037445 DRAWING DATA=6985454 |53711| A| |D|0007.8 | A|49998|0041632 DRAWING DATA=6985454 |53711| A| |D|0007.9 | A|49998|0040265 DRAWING DATA=6985454 |53711| A| |D|0008 | A|49998|0083977 DRAWING DATA=6985454 |53711| A| |D|0009 | A|49998|0062070 DRAWING DATA=6985454 |53711| A| |D|0010 | A|49998|0059631 DRAWING DATA=6985454 |53711| A| |D|0011 | A|49998|0116678 DRAWING DATA=6985454 |53711| A| |D|0012 | A|49998|0102707 DRAWING DATA=6985454 |53711| A| |D|0013 | A|49998|0142455 DRAWING DATA=6985454 |53711| A| |D|0014 | A|49998|0109788 DRAWING DATA=6985454 |53711| A| |D|0015 | A|49998|0114225 DRAWING DATA=6985454 |53711| A| |D|0016 | A|49998|0113091 DRAWING DATA=7106780 |53711| A| |D|0000.A | A|49998|0037573 DRAWING DATA=7106780 |53711| A| |D|0001 | A|49998|0074197 DRAWING DATA=7106780 |53711| A| |D|0002 | A|49998|0057383 DRAWING DATA=7106780 |53711| A| |D|0003 | A|49998|0011634 DRAWING DATA=7106780 |53711| A| |D|0004 | A|49998|0012120 DRAWING DATA=7106780 |53711| A| |D|0005 | A|49998|0027080 DRAWING DATA=7106780 |53711| A| |D|0006.1 | A|49998|0061336 DRAWING DATA=7106780 |53711| A| |D|0006.2 | A|49998|0062750 DRAWING DATA=7106780 |53711| A| |D|0006.3 | A|49998|0059544 DRAWING DATA=7106780 |53711| A| |D|0006.4 | A|49998|0059934 DRAWING DATA=7106780 |53711| A| |D|0006.5 | A|49998|0067163 DRAWING DATA=7106780 |53711| A| |D|0006.6 | A|49998|0067432 DRAWING DATA=7106780 |53711| A| |D|0006.7 | A|49998|0048904 DRAWING DATA=7106780 |53711| A| |D|0006.8 | A|49998|0065290 DRAWING DATA=7106780 |53711| A| |D|0006.9 | A|49998|0036837 DRAWING DATA=7106780 |53711| A| |D|0007.1 | A|49998|0025976 DRAWING DATA=7106780 |53711| A| |D|0007.2 | A|49998|0042011 DRAWING DATA=7106780 |53711| A| |D|0007.3 | A|49998|0044650 DRAWING DATA=7106780 |53711| A| |D|0007.4 | A|49998|0051822 DRAWING DATA=7106780 |53711| A| |D|0007.5 | A|49998|0045659 DRAWING DATA=7106780 |53711| A| |D|0007.6 | A|49998|0021946 DRAWING DATA=7106780 |53711| A| |D|0008 | A|49998|0104851 DRAWING DATA=7106780 |53711| A| |D|0009 | A|49998|0118642 DRAWING DATA=7106780 |53711| A| |D|0010 | A|49998|0087218 DRAWING DATA=7106780 |53711| A| |D|0011 | A|49998|0115563 DRAWING DATA=7106780 |53711| A| |D|0012 | A|49998|0163491 DRAWING DATA=7106780 |53711| A| |D|0013 | A|49998|0115812 DRAWING DATA=7106780 |53711| A| |D|0014 | A|49998|0136614 DRAWING DATA=7107927 |53711| B| |D|0000.COV | B|49998|0033585 DRAWING DATA=7107927 |53711| B| |D|0001 | B|49998|4252677 DRAWING DATA=7107927 |53711| B| |D|0002 | B|49998|0037594 DRAWING DATA=7107927 |53711| B| |D|0003 | B|49998|0010358 DRAWING DATA=7107927 |53711| B| |D|0004.1 | B|49998|0049426 DRAWING DATA=7107927 |53711| B| |D|0004.2 | B|49998|0026181 DRAWING DATA=7107927 |53711| B| |D|0005 | A|49998|0024321 DRAWING DATA=7107927 |53711| B| |D|0006.1 | B|49998|0061921 DRAWING DATA=7107927 |53711| B| |D|0006.10 | B|49998|0048070 DRAWING DATA=7107927 |53711| B| |D|0006.2 | B|49998|0051072 DRAWING DATA=7107927 |53711| B| |D|0006.3 | B|49998|0054381 DRAWING DATA=7107927 |53711| B| |D|0006.4 | B|49998|0060989 DRAWING DATA=7107927 |53711| B| |D|0006.5 | B|49998|0060180 DRAWING DATA=7107927 |53711| B| |D|0006.6 | B|49998|0050981 DRAWING DATA=7107927 |53711| B| |D|0006.7 | B|49998|0020563 DRAWING DATA=7107927 |53711| B| |D|0006.8 | B|49998|0020664 DRAWING DATA=7107927 |53711| B| |D|0006.9 | B|49998|0059783 DRAWING DATA=7107927 |53711| B| |D|0007.1 | B|49998|0024236 DRAWING DATA=7107927 |53711| B| |D|0007.2 | B|49998|0034957 DRAWING DATA=7107927 |53711| B| |D|0007.3 | B|49998|0042119 DRAWING DATA=7107927 |53711| B| |D|0007.4 | B|49998|0038804 DRAWING DATA=7107927 |53711| B| |D|0007.5 | B|49998|0039657 DRAWING DATA=7107927 |53711| B| |D|0007.6 | B|49998|0035975 DRAWING DATA=7107927 |53711| B| |D|0007.7 | B|49998|0026686 DRAWING DATA=7107927 |53711| B| |D|0008.1 | A|49998|0024570 DRAWING DATA=7107927 |53711| B| |D|0008.2 | A|49998|0028225 DRAWING DATA=7107927 |53711| B| |D|0009 | B|49998|0158698 DRAWING DATA=7107927 |53711| B| |D|0010 | B|49998|0125805 DRAWING DATA=7107927 |53711| B| |D|0011 | A|49998|0091983 DRAWING DATA=7107927 |53711| B| |D|0012 | B|49998|0138686 DRAWING DATA=7107927 |53711| B| |D|0013 | A|49998|0439457 DRAWING DATA=7107927 |53711| B| |D|0014 | A|49998|0138515 DRAWING DATA=7107927 |53711| B| |D|0015 | A|49998|0141298 DRAWING DATA=7107927 |53711| B| |D|0016 | A|49998|0574213 DOCUMENT REF DATA=SUBMEPP MS 5560-081-482 | | |A |171102|D| |05| 3. REQUIREMENTS 3.1 Part/Reference Number Items - The CYLINDER,DUPLEX repaired under this contract/purchase order shall meet the operational and functional requirements of this specification TDP and part number(s) listed below. All repair work shall be performed in accordance with this repair/overhaul specification TDP, practices, manuals, directives, and external technical documents. But not limited to technical orders, manufacturing operations, tooling instructions, approved repair standards and any other contractor or government approved documents developed to provide technical repair procedures. CAGE___Ref. No. ;53711 556-7107927-46; 3.1.1 ;PN reference should indicate 556-7107927-46. Item requiring repair is duplex stainless steel cylinder for SSN 774 Class Hydraulic Accumulator as specified in NAVSEA Dwg 556-7107927, find 46. Cylinder to fit Accumulator as specified in NAVSEA Dwg 556-7107927, find 46. Cylinder to fit 3600/3700 Cubic Inch Accumulator assembly on SSN 774 Class submarine. per ISEA, ERH793-2502B7 (pages 36-42 of 556-7107927) changed the material requirements for part 46 (the cylinder) to ASTM-A890 GR 1B. It also containsall the dimensional requirements that would be needed for manufacturing thecomponent.; 3.1.2 ;Item shall be restored to a serviceable condition within the acceptability limits defined in SUBMEPP Submarine Maintenance Standard MS No. 5560-081-482 Rev A CHG-5. (part referenced as "Cylinder (duplex stainless steel), piece no. 1C & 1D,556-6985454 item 1C in maintenance standard).; 3.2 Marking - This item shall be physically identified in accordance with ;MIL-STD-130, REV N, 16 NOV 2012; . 3.3 Changes in Design, Material Servicing, or Part Number - Except for a Code 1 change, which shall be processed as provided in the code statement shown below, no substitution of items shall be made until the NAVICP-MECH Contracting Officer has notified and approval has been given by issuance of a written change order. When any change in design, material, servicing or part number is made to replace or substitute any item to be furnished on this contract/purchase order, the Contractor shall furnish, for the substituting/replacement item, a drawing and an explanation of the reason for the change, explaining the reason therefor. If finished detail drawings are not available, shop drawings in the form used by the manufacturer will be acceptable for Government evaluation. When notifying the Procurement Contracting Officer of the reasons for making substitutions, the type of change shall be indicated by code number in accordance with one of the following statements: Code 1: PART NUMBER CHANGE ONLY - If the Manufacturer's Part Number indicated thereon has changed, but the parts are identical in all respects, supply the item and advise NAVICP-MECH immediately of the new part number. Code 2: Assembly (or set or kit) not furnished - Used following detail parts. Code 3: Part not furnished separately - Use assembly. Code 4: Part redesigned - Old and new parts are completely interchangeable. Code 5: Part redesigned - New part replaces old. Old part cannot replace new. Code 6: Part redesigned - Parts not interchangeable. 3.4 Mercury Free - The material supplied under this contract/purchase order is intended for use on submarines/surface ships and therefore shall contain no metallic mercury and shall be free from mercury contamination. Mercury contamination of the material will be cause for rejection. If the inclusion of metallic mercury is required as a functional part of the material furnished under this contract, the Contractor shall obtain written approval from the Procurement Contracting Officer before proceeding with manufacture. The contractor's request shall explain in detail the requirements for mercury, identify specifically the parts to contain mercury, and explain the method of protection against mercury escape. Such a request will be forwarded directly to the Procurement Contracting Officer with a copy to the applicable Government Inspector. Upon approval by the Contracting Officer, the vendor will provide a "Warning Plate" stating that metallic mercury is a functional part of the item and will include name and location of that part. The use of mercury, mercury compounds, or mercury-bearing instruments and/or equipment in a manner which might cause contamination in the manufacture, assembly, or test of material on this contract is prohibited. The most probable causes of contamination are direct-connected manometers, mercury vacuum pumps, mercury seals, or the handling of mercury in the immediate vicinity. Mercury switches, mercury in glass thermometers, standard cells and other items containing mercury may be used if they are located so as not to constitute a contamination hazard. If external contamination by metallic mercury occurs or is suspected, the following test may be used to determine whether contamination by metallic mercury exists or whether corrective cleaning measures have been effective. Enclose the equipment in a polyethylene bag or close-fitting airtight container for eight hours at room temperature (70 degrees F minimum).Sample the trapped air and if mercury vapor concentration is 0.01 mg/cu meter or more, the material is mercury contaminated insofar as the requirements of this contract are concerned. These requirements shall be included in any subcontract or purchase order hereunder and the Contractor shall insure SubContractor compliance with these requirements. Technical questions pertaining to these requirements shall be referred to the Procurement Contracting Officer via the cognizant Administrative Contracting Officer. For background, the following information is provided: Mercury is corrosive to gold, silver, nickel, stainless steels, aluminum and copper alloys. Stainless steels, nickel, and copper alloys are widely used in reactor plants and other submarine/surface ship systems. Accidental trapping of mercury in a component could cause serious damage to vital parts. Mercury is also toxic if inhaled, ingested, or absorbed through the skin. It is evident that grave consequences could result from small amounts of mercury vapor present in an unreplenished submarine/surface ship atmosphere. 4. QUALITY ASSURANCE 4.1 Responsibility for Inspection - Unless otherwise specified in the contract/purchase order, the Contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contract/purchase order, the Contractor may use his own or any other facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements. 4.2 Responsibility for Compliance - All items must meet all requirements of this contract/purchase order. The inspection set forth in this specification shall become a part of the Contractor's overall inspection system or quality program. The absence of any inspection requirements shall not relieve the Contractor of the responsibility of assuring that all products or supplies submitted to the Government for acceptance comply with all requirements of the contract/purchase order. Sampling in quality conformance does not authorize submission of known defective material, either indicated or actual, not does it commit the Government to acceptance of defective material. 4.3 Records - Records of all inspection work by the Contractor shall be kept complete and available to the Government during the performance of contract/purchase order and for a period of 365 calendar days after final delivery of supplies. 4.4 Inspection/Testing Repaired Items - The Contractor shall perform all inspection and testing requirements as specified in the original manufacturer's specifications and drawings. 5. PACKAGING 5.1 Preservation, Packaging, Packing and Marking - Preservation, Packaging, Packing and Marking shall be in accordance with the Contract/Purchase Order Schedule and as specified below. MIL-STD 2073 PACKAGING APPLIES AS FOUND ELSEWHERE IN THE SCHEDULE 6. NOTES 6.1 Ordering Information for Document References - The Department of Defense Single Stock Point (DODSSP), Website http://www.dsp.dla.mil/, provides product information for the Department Of Defense Index Of Specifications and Standards (DODISS) (i.e.Military/Federal Specifications and Standards), Data Item Descriptions (DIDs), and other DODSSP Products. Most Specifications can obtained directly from http://quicksearch.dla.mil/ A. Availability of Cancelled Documents - The DODSSP offers cancelled documentsthat are required by private industry in fulfillment of contractual obligationsin paper format. Documents can be requested by phoning the Subscription Services Desk. B. Commercial Specifications, Standards, and Descriptions - These specifications, standards and descriptions are not available from Government sources. Theymay be obtained from the publishers of the applicable societies. C. Ordnance Standards (OS), Weapons Specifications (WS), and NAVORD OSTD 600 Pages - These type publications may be obtained by submitting a request to: Commander, Indian Head Division, Naval Surface Warfare Center Code 8410P, 101 Strauss Avenue Indian Head, MD 20640-5035 D. On post-award actions, requests for "Official Use Only" and "NOFORN" (Not Releasable To Foreign Nationals) documents must identify the Government ContractNumber, and must be submitted via the cognizant Defense Contract Management Command (DCMC) for certification of need for the document. On pre-award actions such...