Inactive

NSN 7E-5895-013152924, TDP VER 004, REF NR 825167, QTY 2 EA, DELIVER TO Q9214A, COMMUNICATION AND POWER INDUSTRIES, BEVERLY, MA 01915-5536, INDUCTION NIIN IS 7E, 5895, 013152924, MODULATOR SUBASSEMB, ... NSN 7E-5895-013152924, TDP VER 004, REF NR 825167, QTY 2 EA, DELIVER TO Q9214A, COMMUNICATION AND POWER INDUSTRIES, BEVERLY, MA 01915-5536, INDUCTION NIIN IS 7E, 5895, 013152924, MODULATOR SUBASSEMB, PURCH04614. The Government does not own the data or the rights to the data needed to purchase / contract repair of this part from additional sources. It has been determined to be uneconomical to buy the data or rights to the data. It is uneconomical to reverse engineer the part. Interested parties may obtain copies of Military and Federal Specifications and Standards, Qualified Products Lists (QPLs), Qualified Product Databases (QPDs), Military Handbooks, and other standardized documents from the DoD Single Stock Point (DODSSP) at Document Automation and Production Service (DAPS) in Philadelphia, PA. NOTE: Patterns, Drawings, Deviation Lists, Purchase Descriptions, etc. are NOT stocked at DODSSP. Most documents are available in Adobe PDF format from ASSIST-Online at: http://quicksearch.dla.mil/. Users may use ASSIST-Quick Search to search for and download available documents directly using standard browser software. Documents that are not available for downloading from ASSIST-Quick Search can be ordered from the DODSSP website using the ASSIST Shopping Wizard after obtaining a DODSSP Customer Account by following the registration procedures. Users who do not have access to the internet may contact the DODSSP ASSIST Help Desk at 215-697-6396 (DSN: 442-6396), or mail their request to DLA Document Services, Bldg. 4/D, 700 Robbins Avenue, Philadelphia PA 19111-5094. The proposed contract action is for supplies or services for which the Government intends to solicit and negotiate with only one source under the authority of FAR 6.302-1. All responsible sources may identify their interest and capability to respond to the requirement or submit proposals, quotations or capability statements. This notice of intent is not a request for competitive proposals. However, all proposals received within 45 days (30 days if award is issued under an existing Basic Ordering Agreement (BOA) after date of publication of this synopsis will be considered by the Government. A determination by the Government not to compete with this proposed contract based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. Based upon market research, the Government is not using the policies contained in FAR Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. However, interested persons may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item within 15 days of this notice. One or more of the items under this acquisition is subject to: Free Trade Agreements, if DFARS clause 252.225-7036 Buy American Act--Free Trade Agreements--Balance of Payments Program, is included in the solicitation. The World Trade Organization Government Procurement Agreement and Free Trade Agreements, if DFARS clause 252.225-7021 Trade Agreements, is included in the solicitation.

Inactive

CONTACT INFORMATION|4|N744.22|7LA|717.605.2995|ANTWANE.JEFFERSON-TO@NAVY.MIL| ITEM UNIQUE IDENTIFICATION AND VALUATION (MAR 2016)|19|||||||||||||||||||| INSPECTION OF SUPPLIES--FIXED-PRICE (AUG 1996)|... CONTACT INFORMATION|4|N744.22|7LA|717.605.2995|ANTWANE.JEFFERSON-TO@NAVY.MIL| ITEM UNIQUE IDENTIFICATION AND VALUATION (MAR 2016)|19|||||||||||||||||||| INSPECTION OF SUPPLIES--FIXED-PRICE (AUG 1996)|2||| GENERAL INFORMATION-FOB-DESTINATION|1|B| WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (DEC 2018)|16|INVOICE AND RECEIVING (COMBO)|N/A|TBD|N00104|TBD|TBD|SEE SCHEDULE|TBD|||TBD|||||ANTWANE.JEFFERSON-TO@NAVY.MIL| NAVY USE OF ABILITYONE SUPPORT CONTRACTOR - RELEASE OF OFFEROR INFORMATION (3-18))|2||| ALTERNATE A, ANNUAL REPRESENTATIONS AND CERTIFICATIONS (JUN 2019)|11|||||||||||| BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS CERTIFICATE (NOV 2014)|5|||||| BUY AMERICAN-BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (NOV 2014)|1|| ANNUAL REPRESENTATIONS AND CERTIFICATIONS (DEC 2019)|12|334419|500||||||||||| REPRESENTATION REGARDING CERTAIN TELECOMMUNICATIONS AND VIDEO SURVEILLANCESERVICES OR EQUIPMENT (AUG 2019))|2||| NOTICE OF PRIORITY RATING FOR NATIONAL DEFENSE, EMERGENCY PERPARDENESS, AND ENRGY PROGAM USE (APRIL 2008))|2||| EVALUATION CRITERIA AND BASIS FOR AWARD-|1|| ----------------------------------------------------------------------------- --- NAVSUP-WSS IS SEEKING ELIGIBLE CONTRACTORS TO FURNISH EFFORT INCLUDING --- --- LABOR, MATERIAL, AND FACILITIES AS MAY BE REQUIRED TO EVALUATE, REPAIR --- --- AND/OR MODIFY THE ITEMS AS SPECIFIED FOR STOCK. OFFERS SUBMITTED FOR --- --- REMANUFACTURED, SURPLUS OR NEW PROCUREMENT ACQUISITIONS WILL NOT BE --- --- CONSIDERED AND DETERMINED NON-RESPONSIVE. --- ------------------------------------------------------------------------------ ---THE NAVY DOES NOT POSSESS THE TECHNICAL DATA NECESSARY TO REPAIR THIS ITEM. THE REPAIR OF THIS ITEM HAS BEEN DETERMINED TO BE SOLE SOURCE. ONLY SOURCES THAT ARE APPROVED BY THE IN-SERVICE ENGINEERING ACTIVITY (ISEA) MAY BE CONSIDERED FOR THE REPAIR OF THIS ITEM. IF YOUR COMPANY IS INTERESTED IN BECOMING AN APPROVED REPAIR SOURCE, YOUR COMPANY MUST BE CERTIFIED AS A DEPOT OVERHAUL POINT (DOP). IF YOU BELIEVE YOUR ORGANIZATION POSSESSES THE REQUISITE TECHNICAL DATA AND CAPABILITY TO REPAIR THIS ITEM, PLEASE C COMPLETE/RETURN A SOURCE APPROVAL REQUEST (SAR)-MARITIME (AVAILABLE FOR DOWNLOAD AT https://www.navsup.navy.mil/public/navsup/wss/business_opps). ONCE YOUR SAR REQUEST IS RECEIVED, A TECHNICAL REFERRAL WILL BE SUBMITTED TO THE NAVAL SEA SYSTEMS COMMAND (NAVSEA) ISEA FOR REVIEW AND ENGINEERING DETERMINATION OF YOUR REPAIR CAPABILITIES. PLEASE BE AWARE THAT THE TECHNICAL REVIEW IS UNDER THE AUTHORITY OF NAVSEA AND THE PROCESS TO BECOME AN APPROVED SOURCE CAN BE LENGTHY. OFFERS SUBMITTED FOR REMANUFACTURED, SURPLUS OR NEW PROCUREMENT ACQUISITIONS WILL NOT BE CONSIDERED AND DETERMINED NON-RESPONSIVE. --- PROVIDE REPAIR PRICE AS FIRM FIXED -or- NOT TO EXCEED, SPECIFY ON PROPOSAL FIRM FIXED or NTE. CONSIDER THE FOLLOWING WHEN SUBMITTING FIRM REPAIR PRICING: Include repair price with all costs associated with receipt and complete repair of material that may be in piece part condition, missing hardware, damaged, handling damage (Missing on Induction). Provide the following in addition to your repair quote: New item cost for price comparison $_____. Repair turn-around time (days)_____. (If NTE pricing is proposed, Firm Fixed Pricing must be provided within 60 days). Test and Evaluation Cost (Should unit be Beyond Repair) $_____. Inspection site CAGE_____ . Packaging site CAGE_____ . Quotes will be evaluated on the lowest price. THE CONTRACTING OFFICER RESERVES THE RIGHT TO EXERCISE THE OPTION QUANTITY UNDER THE OPTION SUBCLIN WITHIN 365-DAYS OF THE EFFECTIVE DATE OF THIS REPAIR OF CONTRACT AWARD. THE CONTRACTOR WILL PROVIDE THE SAME DELIVERY TIME AND PRICE LISTED IN THE SCHEDULE. A MODIFICATION WILL BE COMPLETED AT THE TIME THE OPTION IS EXERCISED AND ALL CURRENT CONTRACT TERMS AND CONDITIONS WILL APPLY TO THE OPTION QUANTITY. Large businesses per the NAICS information provided within Clause 52.204-8, and if total proposed value is greater than $700K, per FAR 19.705-5(b) a preliminary basic subcontracting plan addressing the elements of FAR 19.704 must be submitted. Clause 52.219-9 within this soliciation discusses the requirement. NOTE TO DISTRIBUTORS/DEALERS: IF YOU ARE A DISTRIBUTOR, YOUR QUOTATION MUST BE ACCOMPANIED WITH A LETTER FROM THE ACTUAL MANUFACTURER INDICATING THAT YOU ARE AN "AUTHORIZED" DISTRIBUTOR. IF YOU ARE A DEALER, YOUR QUOTATION MUST BE ACCOMPANIED WITH A STATEMENT CLEARLY IDENTIFYING YOUR FIRM AS A DEALER ALONG WITH THE OEM'S NAME/CAGE CODE AND P/N THAT YOU INTEND ON PROVIDING. All contractual documents (i.e. contracts, purchase orders, task orders, delivery orders and modifications) related to the instant procurement are considered to be "issued" by the Government when copies are either deposited in the mail, transmitted by facsimile, or sent by other electronic commerce methods, such as email. The Government's acceptance of the contractor's proposal constitutes bilateral agreement to "issue" contractual documents as detailed herein. \ 1. SCOPE 1.1 This contract/purchase order contains the requirements for repair and the contract quality requirements for the MODULATOR SUBASSEMB . 2. APPLICABLE DOCUMENTS 2.1 Applicable Documents - The document(s) listed below form a part of this contract/purchase order including modifications or exclusions. 2.1.1 "Document References" listed below must be obtained by the Contractor. Ordering information is included as an attachment to this contract/purchase order. 2.2 Order of Precedence - In the event of a conflict between the text of this contract/purchase order and the references and/or drawings cited herein, the text of this contract/purchase order shall take precedence. Nothing in this contract/purchase order, however, shall supersede applicable laws and regulations unless a specific exemption has been obtained. DOCUMENT REF DATA=MIL-STD-130 | | |K |000115|A| | | DOCUMENT REF DATA=IPC J-STD-001C | | | |000301|A| | | 3. REQUIREMENTS 3.1 Cage Code/Reference Number Items - The MODULATOR SUBASSEMB repaired under this contract/purchase order shall meet the operational and functional requirements as represented by the Cage Code(s) and reference number(s) listed below. All repair work shall be performed in accordance with the contractors repair/overhaul standard practices, manuals and directives including but not limited to drawings, technical orders, manufacturing operations, tooling instructions, approved repair standards and any other contractor or government approved documents developed to provide technical repair procedures. CAGE___Ref. No. ;04614 17-20080-188236 88236 7825167; 3.2 Marking - This assembly and its piece parts shall be physically identified in accordance with MIL-STD-130. 3.3 Soldering - The requirements for soldered electrical and electronic assemblies shall conform to IPC J-STD-001, Class ;3; . 3.4 Changes in Design, Material Servicing, or Part Number - Except for a Code 1 change, which shall be processed as provided in the code statement shown below, no substitution of items shall be made until the NAVICP-MECH Contracting Officer has notified and approval has been given by issuance of a written change order. When any change in design, material, servicing or part number is made to replace or substitute any item to be furnished on this contract/purchase order, the Contractor shall furnish, for the substituting/replacement item, a drawing and an explanation of the reason for the change, explaining the reason therefor. If finished detail drawings are not available, shop drawings in the form used by the manufacturer will be acceptable for Government evaluation. When notifying the Procurement Contracting Officer of the reasons for making substitutions, the type of change shall be indicated by code number in accordance with one of the following statements: Code 1: PART NUMBER CHANGE ONLY - If the Manufacturer's Part Number indicated thereon has changed, but the parts are identical in all respects, supply the item and advise NAVICP-MECH immediately of the new part number. Code 2: Assembly (or set or kit) not furnished - Used following detail parts. Code 3: Part not furnished separately - Use assembly. Code 4: Part redesigned - Old and new parts are completely interchangeable. Code 5: Part redesigned - New part replaces old. Old part cannot replace new. Code 6: Part redesigned - Parts not interchangeable. 4. QUALITY ASSURANCE 4.1 Responsibility for Compliance - All items must meet all requirements of this contract/purchase order. The inspection set forth in this specification shall become a part of the Contractor's overall inspection system or quality program. The absence of any inspection requirements shall not relieve the Contractor of the responsibility of assuring that all products or supplies submitted to the Government for acceptance comply with all requirements of the contract/purchase order. Sampling in quality conformance does not authorize submission of known defective material, either indicated or actual, not does it commit the Government to acceptance of defective material. 4.2 Records - Records of all inspection work by the Contractor shall be kept complete and available to the Government during the performance of contract/purchase order and for a period of 365 calendar days after final delivery of supplies. 4.3 Inspection/Testing Repaired Items - The Contractor shall perform all inspection and testing requirements as specified in the original manufacturer's specifications and drawings. 5. PACKAGING 5.1 Preservation, Packaging, Packing and Marking - Preservation, Packaging, Packing and Marking shall be in accordance with the Contract/Purchase Order Schedule and as specified below. MIL-STD 2073 PACKAGING APPLIES AS FOUND ELSEWHERE IN THE SCHEDULE 6. NOTES 6.1 Ordering Information for Document References - The Department of Defense Single Stock Point (DODSSP), Website http://www.dsp.dla.mil/, provides product information for the Department Of Defense Index Of Specifications and Standards (DODISS) (i.e.Military/Federal Specifications and Standards), Data Item Descriptions (DIDs), and other DODSSP Products. A. Availability of Cancelled Documents - The DODSSP offers cancelled documents that are required by private industry in fulfillment of contractual obligations in paper format. Documents can be requested by phoning the Subscription Services Desk. B. Commercial Specifications, Standards, and Descriptions - These specifications, standards and descriptions are not available from Government sources. They may be obtained from the publishers of the applicable societies. C. Ordnance Standards (OS), Weapons Specifications (WS), and NAVORD OSTD 600 Pages - These type publications may be obtained by submitting a request to: Commander, Indian Head Division, Naval Surface Warfare Center Code 8410P, 101 Strauss Avenue Indian Head, MD 20640-5035 D. On post-award actions, requests for "Official Use Only" and "NOFORN" (Not Releasable To Foreign Nationals) documents must identify the Government Contract Number, and must be submitted via the cognizant Defense Contract Management Command (DCMC) for certification of need for the document. On pre-award actions such requests must be submitted to the PCO for certification of need for the document. E. NOFORN Military Specifications and Standards (including Amendments, Change Notices and Supplements, but NOT interim Changes) to be ordered from: Contracting Officer NAVICP-MECH Code 87321 5450 Carlisle Pike P.O. Box 2020 Mechanicsburg, Pa. 17055-0788 F. Nuclear Reactor Publications Assigned NAVSEA Documents and Identification Numbers (i.e. NAVSEA Welding Standard, NAVSEA 250-1500-1) are to be ordered from: Commanding Officer NAVICP-MECH Code 009 5450 Carlisle Pike P.O. Box 2020 Mechanicsburg, Pa. 17055-0788 G. Technical Manuals Assigned NAVSEA Identification Numbers (i.e. NAVSEA Welding And Brazing Procedure, NAVSEA S9074-AQ-GIB-010/248) are to be ordered from: Naval Inventory Control Point Code 1 Support Branch 700 Robbins Avenue Phildelphia, Pa. 19111-5094 H. Interim Changes and Classified Specifications shall be obtained by submitting a request on DD Form 1425 to NAVICP-MECH. This item is manufactured/repaired by a Government facility. Performing Activity: N00421 Commanding Officer, NAVAIRWARCENACDIV 4.11.7, ATTN POC: Jim Atkins, james.p.atkins@navy.mil, (301) 995-6692Reference Number/CAGE: (025917-20080-1Equipment Name:, MODULATOR SUBASSEMBLY U/I: EA, P/N: 17-20080-1Technician: Steven Zentz, 717-605-7772, steven.zentz@navy.mil