Inactive

The Naval Sea Systems Command (NAVSEA) has a requirement for the detail design and construction (DD&C) of Submarine Tenders under the AS(X) recapitalization program. The AS(X) recapitalization program... The Naval Sea Systems Command (NAVSEA) has a requirement for the detail design and construction (DD&C) of Submarine Tenders under the AS(X) recapitalization program. The AS(X) recapitalization program is managed by the Strategic and Theater Sealift Program Office, PMS 385. The solicitation provides for DD&C of up to two (2) AS(X) ships, engineering and industrial support, crew familiarization, training equipment,and provisioned item orders. AS(X) is being specifically designed to support deployed VIRGINIA class (VCS), COLUMBIA class (CLB), and future generation submarines in the 21st century. AS(X) will also be capable of supporting Los Angeles (LA) Class submarines and OHIO Class SSBNs until their retirement. AS(X) will conduct steady state and wartime sustained, forward-based tending, resupply, and I-level repair operations on deployed submarines while at anchor or moored at a pier. All systems essential to conduct tending, repair operations and logistical support to tended submarines will be manned to sustain 24-hour/day services. In steady state, the AS(X) provides pier-side support in a forward deployed submarine homeport, providing sustained repair, supply, weapons handling/rearming, and tending operations for home ported or visiting submarines and ships, and fly-away emergent voyage repair services for other deployed submarines and ships. AS(X) DD&C SOLICITATION DOCUMENTS The AS(X) DD&C solicitation contains Controlled Unclassified Information (CUI). Therefore, the AS(X) DD&C solicitation and all associated attachments are not publically releasable on SAM.gov. Prospective Offerors must request a “Terms of Use Agreement” (TOUA) from the Procuring Contracting Officer (PCO). The TOUA letter shall be signed by an authorized representative of the prospective Offeror and returned to the Government points of contact identified in this notice. Upon receipt of a duly executed TOUA, the Contracting Officer and/or Contract Specialist will provide via secured electronic manner (DOD SAFE) the AS(X) DD&C solicitation, amendments and associated attachments to the potential Offeror. Amendment 0001 to this solicitation has been issued on 17 August 2023 and is being provided directly via DOD Safe to firms with an approved TOUA. Amendment 0002 to this solicitation has been issued on 31 August 2023 and is being provided directly via DOD Safe to firms with an approved TOUA. Amendment 0003 to this solicitation has been issued on 15 September 2023 and is being provided directly via DOD Safe to firms with an approved TOUA. Amendment 0004 to this solicitation has been issued on 29 September 2023 and is being provided directly via DOD Safe to firms with an approved TOUA. Amendment 0005 to this solicitation has been issued on 30 October 2023 and is being provided directly via DOD Safe to firms with an approved TOUA. Amendment 0006 to this solicitation has been issued on 09 November 2023 and is being provided directly via DOD Safe to firms with an approved TOUA. Amendment 0007 to this solicitation has been issued on 16 November 2023 and is being provided directly via DOD Safe to firms with an approved TOUA. Amendment 0008 to this solicitation has been issued on 28 November 2023 and is being provided directly via DOD Safe to firms with an approved TOUA. Prospective Offerors must request a TOUA from the NAVSEA PCO by 5:00 pm (EST) on the fourteenth (14th) calendar day from the posting of the original solicitation notice. Prospective Offerors that do not request a TOUA letter by this deadline will not be provided the AS(X) DD&C Solicitation and associated Attachments. Prospective Offerors that already have an approved TOUA from the PCO must request the AS(X) DD&C Solicitation and associated Attachments from the Government points of contact identified in this notice by 5:00 pm (EST) on the fourteenth (14th) calendar day from the posting of the original solicitation notice. Once requested, the Contracting Officer and/or Contract Specialist will provide via secured electronic manner (DOD SAFE) the AS(X) DD&C solicitation, amendments and associated attachments to the potential Offeror. The TOUA shall be signed and returned: TO: Mr. Roy Yim - roy.h.yim2.civ@us.navy.mil CC: Ms. Christiana Casey – christiana.e.casey.civ@us.navy.mil SUBJECT LINE: Terms of Use Agreement (insert name of company) N00024-23-R-2500 Solicitation System for Award Management (SAM) is the single point of entry for posting of the synopsis and solicitations to the internet. Prospective Offerors should monitor the SAM page for the notice of release of the solicitation, and any applicable amendments. Offerors must be registered in SAM to participate in this procurement at SAM.gov. All responsible sources may submit an offer, proposal, or quotation which shall be considered by the agency.

Inactive

NAVSEA has a requirement to procure brand name equipment to support the acquisition of two (2) AS(X) ships. The AS(X) System Specification includes items that are both brand-name descriptions and bran... NAVSEA has a requirement to procure brand name equipment to support the acquisition of two (2) AS(X) ships. The AS(X) System Specification includes items that are both brand-name descriptions and brand-name or equal/equivalent descriptions. At this time, NAVSEA is requesting industry feedback on the below updated brand-name descriptions and brand-name or equal/equivalent descriptions. Solicited feedback could include whether a firm believes they have an item that could be equal or equivalent to an item listed below. The following brand-name items are of a critical nature and do not have an equivalent product: Component / System Counting Equipment (Mirion Technologies CRONOS 11) Counting Equipment (Mirion Technologies FASTSCAN) Counting Equipment (Mirion Technologies High Purity Germanium Detector) Sealer (KABAR F15-25 S/N 6834-12) Air Particle Sampler (AVS-60AN) Subcomponent (Ametek Rotron Blow P/N DR202Y9) Subcomponent (Dwyer Flowmeter 20 to 200 SCFH) Subcomponent (P/N RMC-103-SSV or equivalent) Subcomponent (Redington Hour meter, P/N 270-6300 or equal) Subcomponent (Housing) Evaporator (ENCON Model E33V4-24) Throttling Ball Valve (AVCO 1933TT-BW-100-BAV60-LH or equivalent) The following brand-name or equal descriptions are presumed to have a limited number of equivalents from responsible sources; however, it is possible that a potentially superior product or system may be found or become available: Component/System Tank Level Indicator (VEGA VEGAPULS 6X) Backup Level Alarm (Temposonic Level Plus - Level Limit) Pump (Magnatex MP series) Filter (Cuno Drawing 14436) Demineralizer Vessel (Cochrane Drawing 128877) Conductivity Meter (Rosemount Series 400 Sensor with Rosemount Serview 1056 Process Meter) Pressure Gage (Ashcroft Part Number 1279) Camera System (Genral Electric Everest Ca-Zoom 6.2 PTZ140) Processing filters DMF-F-1 (Pall Part number 5HD4886-1963) Processing filters DMF-F-2 (Pall Part number 6MSO-304-2F-150U) Filter cartridges for processing filter DMF-F-1 (Pall Part number AB1U030Z3H13) Filter cartridges for processing filter DMF-F-2 (Pall Part number AB1NB3WH13) Ultrasonic Flow Meters (Siemens SITRANS FUS1010) Swing Ball Valve (SHARPE 1-25-1-2-6) Three-Way Solenoid Dump Valve (ASCO DWG AV-262534) Flexible Impellor Pump (Jabsco 30520-011) Motor (Baldor EM3661T) Liquid Level Float (Temposonics M-Series Model MR 201248-2) Process Meter (Precision Digital Corporation PD6000-6R5 with Red Display) Process Meter (Precision Digital Corporation PD6000-6R0 with Red Display) Liquid Level Gauge and Thermometer (Temposonics LPR2D1B11A11CFFAU100005) Instrument Enclosure (nVent Hoffman CSD242410WSS) Valve Hatch Support (McMASTER CARR Catalog# 11615A12, LID Support Style 2) Camera Hatch Support (SUGATSUNE LAMP Brand ITEM L-195) PC Setup Software on CD and Adapter (Temposonics Part Number 252273-1) Service Cable (McMASTER CARR Catalog# 7422K26) Electrical Plug (Ericsson Manufacturing Company Item #1512-PW6P) Valve (SWAGELOK SS-65TW16P40-JL) Check Valve (Check-All Valve Manufacturing Company US-I-SS-MT-.500-SS) Sewing Machine (Juki Corporation model # JUKI LU-1508N or NH) Grommet Machine (Edward Segal Inc. Thomaston CT 3P6 with pedestal stand and foot pedal) UT Cleaner (Blue Wave Ultrasonics Model # DI-1218) Ball Valve (SWAGELOK SS-68TW32P80-JL-BK) Instrument Enclosure Lockable Handle (nVent Hoffman Catalog# CWHPTO) Instrument Enclosure Panel (nVent Hoffman Catalog# CP2424) Instrument Enclosure Swing-Out Panel (nVent Hoffman Catalog# CSP2424) Instrument Enclosure Mounting Brackets (nVent Hoffman Catalog# CMFKSS) HEPA Filter (Donaldson Catalog# P19-4411) Rotating Spray Head (Lechler Part# 577.289.17.BN) Flat Fan Nozzle (Lechler Part# 688.722.16.BE) Solid Stream Nozzle (Lechler Part# 722.16.BE) Demister (Koch-Glitsch York Style 326 or Koch 706 with 1/4" Round Grid) Ball Joint Nozzle Mount (Lechler Part# 092.030.16.BF) Aperture Plate (Tandemloc Part# T10021A-100) Surge Suppressor (Sola/Hevi-Duty Catalog# STFV050-10N) Indicator Light (Eaton Part# E22HL2X8) Weatherproof Buzzer (Edwards Part# B-8698-P1) Safety Switch (Schneider Electric Part #H221NRB with 15A Fuse) Jumper Cable (Panduit LC600A-12) Secure AIS (SAAB R5) NH thread nozzle (Akron Brass Style 3020) NH thread nozzle (Akron Brass NH Style 3023) Fire detection and actuation components (Dynalec 63103-250-2) Fire detection and actuation components (Dynalec 63103-200-13) Fire detection and actuation components (Dynalec 63103-900) Fire detection and actuation components (Dynalec 63103-300) Wye type strainer (Aircraft Appliance and Equipment Limited (AAE) Part Number 740573-1) MOPV (Marotta Part Number 761-004) Digital density meter (Anton Paar DMA 35) Lock (FF-L-2740B Kaba MasCDX10) Padlock (Sargent and Greenleaf, Inc. Model 826A) Padlock (Sargent and Greenleaf, Inc. Model 951) Padlock (Sargent and Greenleaf, Inc. Model 8077AC) Padlock (American Lock Company Model 6530B) Padlock (American Lock Company Model MX-100) Padlock (American Lock Company Model 702) Padlock (Master Lock Co. Model 175) Padlock (Master Lock Co. Model 2001) Anti-sweat coating (Hempel Marine Coatings ANTI-CONDENS 617 US) Pigeon hold rack (Uline mail sorter unit, tan, model H-4469) GSA-approved Stanley Vidmar cabinets GSA-approved Equipto workbenches Alternating Tread Stair Rigid Ladder (Lapeyre) Brackets in Crash and Salvage Equipment Locker for SCBA (ZICO WALKAWAY brackets) Programmable Logic Controller (PLC) (Allen Bradley ControlLogix) Piping system component (Garlock 3000) Piping system component (Garlock IFG 5500/9900) Butterfly valve (VANESSA Series 30,000) Blast Profile Comparator (Keane-Tator) Replica Tape (Testex) Bradley Directional Flow Arrow Tape Electrical Test Panel (Westwood 700387-01-1'07) 3D-Printer (Metal) (HAAS TM-1) Chiller for 3D Printer (Metal) (Laird Thermal Systems NRC1200-A1-10-ST1) Pipe Threading Machine (Oster 716) Drill Press (metal) (Jet Tools 716300) Sheet Metal Laser Cutter (Amada LC Alpha) Oscillating Gasket Cutting Machine (NE Seal Industrial Products Atom Flashcut Flex 'S' 3015) Sheet Metal Bender (manual) (Baileigh HB-9612) Sheet Metal Bender (powered) (Baileigh HB-9612H) Iron Worker (Piranha P1188) Press Brake (Piranha 70-08) Band Saw, Metal (Powermatic PM1800B) Band Saw, Metal (DoAll Sawing Products DS-320SA) Band Saw, Metal (Baileigh BS-360SA) Metal Shearing Machine (Piranha 1/2"X8' Piranha Hydraulic Shear) Slip Roller, Manual (Pexto 416) Slip Roller, Powered (Webb 7L-9006) Welder, Cooler (Miller Welds Coolmate 3) Cornice Brake (Dreis & Krump BPU 612-6) Finger Brake (Baileigh HB-9616) Notcher (Scotchman AL150-HS) Rotary Punch (Rotex Model 18) Spot Welder (Miller Welds MSW-41) Fixed AC Welder (Miller Welds Synchrowave 400) Bake Oven (heat treatment) (Lewco EWT06ED-60-60-60) Powder Coat Oven (GFS GBO-080810) Powder Coat Spray Booth (Rohner STW-8-8-6) Walk-in Sand Blast Booth (Merchant 1 Manufacturing BBFT13813) Walk-in Spray Paint Booth (M-tek Spray Booths MT-F 21) Pipe Bender (large) (Ercolina GB200CNC) Pipe Bender (small) (Baileigh RDB-175) (media) Abrasive Blasting Machine/Sand Blast Booth (Media Blast Power Strip 4836) CNC Vertical Turret Lathe (KRC Machine Tool Solutions VTC-12C) Manual Lathe (Jet GHB-1340A (Small)) Manual Lathe (Monarch 1610 (Medium)) Manual Lathe (Lodge & Shipley RXE2516 (Large)) CNC Lathe (Haas ST20Y) Carbide Tool Bit Grinder/Sharpener (Shars Tool Co. SKU101-1008) Pedestal Grinder (Dayton 1FYX2) Radial Arm Drill Press (Kaast RD-50L) Surface Grinder (Grizzly G3104) Metal Finisher and Polisher (Woodstock International ShopFox W-1712) Tool and Cutter Grinder (ACRA Machinery M-40) Cylindrical Grinder (Kaast RC-Grind 1050) Horizontal Boring Mill (Summit Machine Tool HBM 110 H) Milling Machine (Summit Machine Tool SC EVS-760B CNC VBM) CNC Mill (Hardigne V710) Abrasive Cutoff Saw (Baileigh 350m) Manual Arbor Press (Famco Machine 6-C) Disintegrating Machine (Electro Arc 2-DVC) Hydraulic Press (Dake Corp 909250) Heat Treatment Furnace (Cress Manufacturing C1288 / PM4) Quench Tank (Penn Tool Co. QT-1734) CNC Water Jet Cutter (Techni Waterjet i713-G2) CNC Plasma Cutter (Lincoln Electric Cutting Systems Torchmate 4800) Welding Rod Pre-heating Ovens (Pheonix International Type 300 Part # 1200201) Hose Cut Off Machine (Custom Crimp HS500) Dog Leg Machine (hose crimping machine) (Custom Crimp IC-340) Hose Hydro Test Rig (Custom Crimp BE2500PLC) CNC Wire EDM (Mitsubishi MX600) Precision Measuring – Granite Surface Plate (Mitutoyo 517-843) 3D Printer (Polymer) (SourceGraphics Ultimaker S5) 3D Printer (Aluminum) (HAAS TM-1) Chiller for 3D Printer (Aluminum) (Laird Thermal Systems NRC1200-A1-10-ST1) Wet MT Machine (NDT Supply PTS MAS Series MAS 500) Vertical Valve Tester (Barbee HTF-50T) Hydrostatic Valve Test Stand (Barbee HP-6000-RV) Machine Tool Washer (Better Engineering G-1000) Ultrasonic Parts Washer (Graymills BTU1420-A) Aqueous Parts Washer (chemical) (Better Engineering G-1500) Governor Test Stand (Bauer Model 3576) Injector Test Stand (Rocken Tech RNT 11600-2) Hydraulic Test Stand (up to 10,000 PSI) (Calder UFV-14-165T) Pneumatic Valve Test Stand (EFCO USA PS-75MoOJ) Arbor Press, Hand Operated (Famco Machine 3 1/2 R) Variable Speed Buffer (Pedestal mount) (JET Tools IBG-8VSB 8") Oxygen Clean Workstation (Labconco 5220021) Table Saw (South Bend SB1111) Band Saw (Grizzly G0568) Disc / Belt Sander (combination unit) (Jet Tools J-4200A-2) Jointer (minimum 6” wide) (Northfield Wood No. 8 Planer) Laser Engraver (GCC World GLS H 80Ti) Oscillating Sander (Woodstock International W1686) Wood Planer (minimum 24" wide) (Grizzly G9961) Shaper (Baileigh Industrial SS-2725) Wood Lathe (able to handle 48” material between end stocks) (Baileigh Industrial WL-2060VS) CNC Router Table (Grizzly G0894) Downdraft Table with Ventilation Hood (minimum of 4’ X 8’) (Downdraft by Diversitech WGD 5050CFM) Dust Collection System (minimum of two) (Grizzly G1030Z2P) Key Cutter (ILCO Futura Auto) Computer Controlled Etching Machine (Keyence MDX2000A) Computer Controlled Laser Engraving Machine (Gravograph LS1000XP) Computer Controlled Rotary Engraving Machine (mechanical engraver) (Gravograph IS8000XP) Drill Press (King 41120-0) Ultrasonic Parts Washer (Graymills TUS3725SL) Bake Oven (Despatch PRC 48 x 48 x 72) Balancing Machine (Schenk HM20BU) Burn Out Oven (Despatch PRE 2-96-1E) Coil Puller (Whitelegg WHO3-CEM) Coil Winder & Tensioner (Samatic-Jenlor Model 2780) Core Loss Tester (Lexseco 1081) Varnish Dip Tank (Henek HVAR-10-HFV2-X) A/C Electric Motor Test Stand (Dyne Systems XYZ Lift Table) 30-Gallon PLASTISOL Dip Tank (Anthem Screen Printing EnviroLine 30 Gallon Dip Tank) Blast Cabinet (small) (Raptor Blaster RB4836) Disk and Belt Sander (Woodstock International W1712) Dust Collector (Spencer Turbine SA-405) Table Saw (Delta Machinery 36-725 T2) PLASTISOL Bake Oven (Despatch 36 x 36 x 60) Precision Lathe (Monarch Lathes EE 10" x 20" Precision Toolmakers Lathe) Oxygen Clean Workstation (Labconco 5065547) Force Machine (Chatillon Force Measurement CS2-1100) Rope Cutter (Talurit LK 100 1 VW) Rope Annealer (Talurit LGK 14) Swager (Talurit 400T Swager) Horizontal Test Bed (Talurit 100 mt x 12 m Test Bed) Vertical Test Stand (Talurit 102MT) Air Compressor (Alkin Compressors 702-Chassis) Penetrant Testing Workstation (Magnaflux ZA-1227 Post Emulsified Hydrophilic Fluorescent Penetrant Inspection Station)