Synopsis Brake Bleeder Valve Protection Cap This synopsis provides notice of Naval Air Systems Command F/A-18 and EA-18G Program Office’s (PMA-265) intent to issue a firm fixed price (FFP), sole sourc... Synopsis Brake Bleeder Valve Protection Cap This synopsis provides notice of Naval Air Systems Command F/A-18 and EA-18G Program Office’s (PMA-265) intent to issue a firm fixed price (FFP), sole source, stand-alone contract to Honeywell Aerospace Technologies (3520 Westmoor St., South Bend, IN 46628) for the modification and retrofit of the Brake Bleeder Valve Protective Cap into the F/A-18/EA-18G aircraft weapon systems. This procurement includes the modification of the Brake Bleeder Valve Protective Cap, testing, updated drawings, and procurement of approximately 4,800 caps. The period of performance for this effort is expected to be approximately two years. This synopsis is for informational purposes only. THIS NOTICE IS NOT A REQUEST FOR COMPETITIVE PROPOSALS. The Government intends to negotiate the contract under the authority of FAR 6.302-1; only one responsible source and no other supplies or services will satisfy agency requirements. Honeywell is the original equipment manufacturer (OEM), sole designer, developer, integrator, and supplier of the Brake Bleeder Valve. Additionally, Honeywell possesses a repository of data for the engineering design of the Brake Bleeder Valve. The North American Industry Classification Systems (NAICS) code for the action described herein is 332912. A determination by the Government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the Government. This is not a commitment by the Government to issue any solicitations, make an award or awards, or to be responsible for any monies expended by any interested parties before award of a contract for the efforts mentioned above. Information provided herein is subject to change and in no way binds the Government to solicit for or award a contract. Any questions shall be submitted to Emily Schelling via email at emily.d.schelling.civ@us.navy.mil no later than 12 September 2025 at 1700 EST.

DISCLAIMER THIS SOURCES SOUGHT IS FOR INFORMATIONAL PURPOSES ONLY. THIS IS NOT A REQUEST FOR PROPOSAL. IT DOES NOT CONSTITUTE A SOLICITATION AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMEN... DISCLAIMER THIS SOURCES SOUGHT IS FOR INFORMATIONAL PURPOSES ONLY. THIS IS NOT A REQUEST FOR PROPOSAL. IT DOES NOT CONSTITUTE A SOLICITATION AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS, AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY VENDORS TO THIS TECHNICAL DESCRIPTION IS STRICTLY VOLUNTARY. Sources Sought – F/A-18 and EA-18G Brake Bleeder Valve Protective Cap This announcement constitutes a Request for Information (RFI) to identify potential sources for the development, design, production, and retrofit associated with the incorporation of the Brake Bleeder Valve Protective Cap into the F/A-18/EA-18G aircraft weapon systems. Departures of the Brake Bleeder Valve led to rapid and complete depletion of Hydraulic (Hyd) 2A and Hyd 2B systems, resulting in loss of normal and emergency braking and possible off-runway excursion. The Brake Bleeder Valve relies on torque application to resist backing out. No mechanical retention mechanism currently exists to prevent backing out. A mechanical retention mechanism, by way of a modified Brake Bleeder Protective Cap that can accommodate safety wire to prevent backing out and the departure of the Bleeder Valve (Part Number (PN) 2611992-5), is required to ensure all contributing factors to failure are adequately mitigated. This modification that the Government is seeking to procure will not affect form, fit, or hydraulic function of the Brake Bleeder Valve. The contractor will design a new configuration Protective Cap to meet the requirements of the Brake Assembly performance specification and provide the associated drawings/updates. The Government does not own the current drawings for PN 2611992-5. The anticipated start date is in 2nd quarter FY26. NAVAIR expects to procure up to 4,800 redesigned caps for retrofit. Vendors interested in responding to the RFI shall provide a one to two page overview statement addressing the following: 1) brief statement of interest/capabilities; 2) any other information at vendor discretion such as catalogs, drawings/illustrations, technical manuals, training description/material, pricing, testing documentation, brochures, and/or any other documentation that describes the capabilities, interfaces, and specifications; 3) identify any Government customer who has procured the Brake Bleeder Valve Protective Caps or a similar, comparable product and provide customer point of contact, including a telephone number, e-mail address, or website. Responses shall be submitted electronically to the e-mail address provided below. Responses are requested by the closing of the RFI. Earliest possible response is encouraged. Responses will be reviewed and additional information may be requested from individual vendors, if desired by the Government. Capability statement packages shall be no more than two 8.5 x 11 inch pages, font no smaller than 12 point, 1.5 spaced and must demonstrate ability to provide the supplies/services listed in the required capabilities described herein. The capability statement package shall be sent via email to emily.d.schelling.civ@us.navy.mil. Submissions must be received no later than 5:00 p.m. Eastern Standard Time on 8 August, 2025. Questions or comments regarding this notice may be addressed to emily.d.schelling.civ@us.navy.mil. All responses shall include Company Name, Company Address, Company CAGE Code, Company Business Size, and Point of Contact (POC) including name, phone number, and email address. This RFI does not constitute a commitment from the Government to issue a solicitation, make an award or awards, or be responsible for any monies expended by any interested party in support of the effort described above. It is a market research tool being used to determine potential and eligible firms capable of providing the supplies/services described herein prior to determining the method of acquisition and issuance of a Request for Proposal. The Government reserves the right to review and use the data submitted at its own discretion. Upon request, the Government will protect proprietary information from unwanted disclosure. Any such requests shall be submitted with the statement of capabilities. Any contract actions that the Government intends to procure in the future will be synopsized on the Government-wide Point of Entry (GPE) as applicable in accordance with FAR 5.201(b).