Inactive

This is a Request For Information (RFI). To help gauge interest in up coming Solicitation. CLIN 0001 Firefighting suits for forest fire QTY 11 • Model FORESTIER in acc. with EN 15614 performance level... This is a Request For Information (RFI). To help gauge interest in up coming Solicitation. CLIN 0001 Firefighting suits for forest fire QTY 11 • Model FORESTIER in acc. with EN 15614 performance level A1 A2, EN 1149-5 • Composition: 57% kermel, 40% lenzing FR, 2% elastine, 1% belltron, 230 g/m2 • Reflective parts : fluorescent retroreflective yellow-silver strip • Suit Size and Quantity: XL =5; 3XL=4; XXL=2 • Pants Size and Quantity: XL=5; XXL=6 The fire suit has jackets and pants. • JACKET description: The jacket has a semi-long cut. Closing with a zipper covered with a strip. On the chest and the lower part of the jacket there are two incised pockets with flaps. A radio station pocket is sewn on the inside of the front on the right pocket. A microphone holder is sewn to the chest of the right front. A reinforcement of the base fabric in a different color has been added to the shoulders and upper part of the sleeves. Such reinforcement was added to the elbows, the length of the back and the lower part of the shoulder blade. Knit is sewn on the inside of the length of the sleeves, for better adhesion of the sleeves to the arm. The collar is also made of knit, with added reinforcement of the base fabric. A soft velcro for the flag and emblem is sewn on the left and right sleeves. Reflective tape: perforated yellow-silver- yellow 5 cm wide: on the front at chest height and at waist height, on the sleeve above and below the elbow reinforcement • PANTS description: The pants have adjustable removable suspenders. The pants close with a zipper and one button. On the back of the pants are two sewn-on pockets with combos in combination and with flaps that close with velcro. On the side of the legs, there are pockets in combination and lids that close with velcro. Reinforcements of the base fabric in a different color are sewn on the knees and on the length of the legs. In the knee area, there are seams for the 3D shape of the knee. Reflective tape: perforated yellow-silver, yellow 5 cm wide: vertically from the knee with a side seam on the back leg to the reinforcement in length, on the lower part of the sock in the entire circumference to the vertical strip – double CLIN 0002 Special boots Intervention boots multipurpose for forest and urban fire QTY 11 • Model TORCH BOA in acc. with EN15090 HI3+CI+AN+F2A+SRC • Safety Firefighting boot for professional use (Multipurpose: Forest, Structural, Rescue, Fire, Paramedics, etc..), certified under EN 15090:2012 -International Designation Codes: HI3+CI+SRC + AN (F2A) • Upper made of full grain leather and napa leather • Lining: Gore Tex® membrane and Poromax® fabric • Protections o Safety toecap: non-metallic with rubber external toe cap protection. o Non-Metallic penetration resistant midsole o Ankle protection • Removable insole • Sole: glued, Rubber nitrile + internal Polyurethane • 3M® Side fire-resistant reflectors and Kevlar threads • Closing system: Quick release Boa® system. • Sizes 36-50 (EU) / 3,5-15 (UK) (Sizes 36+37 EU all black) • Height: 26 cm internally without sole/30 cm externally with sole (size 42 ± 5%) • Weight: 2, 30 kg / pair size 42 ± 5% • Size and Quantity: 41=2; 42= 3; 43=4; 44=1; 45=1 CLIN 0003 Firefighting gloves /Intervention gloves for forest and urban fire QTY 11 • Model Cheyenne plus in acc. with EN659 cat 3 • Fire gloves constructed from grain cowhide leather for specially treated to make it heat, water and abrasion resistant. • Additional para-aramid reinforcement on the back and palm to ensure the team can handle anything the situation throws at them. • Fire Gloves Features: • Upper material: Grain cowhide leather – specially treated, heat, water and abrasion resistant • Reinforcement: Palm: Leather reinforcement • Intermediate layer: Aramid non-woven fabric • Membrane: Membrane Porelle® FR • Lining: Aramid lining with increased grammage • Wristband: Para-aramid knitted wristband • Additional information: Reflective element, hook for hanging gloves on clothing CLIN 0004 Helmet/ forest fire protection (polymer plastic) QTY 11 • PAB MP1Profesional in acc. with EN16471:2014 EN16473: 2014, EN12492:2012, EN1385:2012 • THERMOPLASTIC multi-purpose helmet designed for fighting wildfires, technical rescue, mountaineering, canoeing, and whitewater sports • High standard of protection and comfort with accessories that widen the customization options • High resistance to mechanical impacts Low-temperature classification –20°C • Electrical insulation capacity E2 • Effective visibility achieved by reflective tape for optimal use in specific conditions • Integrated adjustment system (52–64cm) • Head and headband padding, easily replaceable • Openings on the shell for effective ventilation • Weight 850 g ± 30 g (starting configuration) • High temperature resistant thermoplastic shell • Anti-scratch and anti-fog coated external visor (EN 14458) • Anti-scratch and anti-fog coated internal goggle (EN 166 and EN 14458) CLIN 0005 Protective mask QTY11 • Protective mask model M9200 + A2B2E2K2 In acc. with EN140 EN136 • Silicone full face mask with innovative ROTOR® system adjustment (patented) • One-hand use even when wearing gloves. • Wide polycarbonate screen (210°). • Inside silicone half-mask to reduce mist and increased comfort (3 inhalation valves, an exhalation valve, phonic system). • Adjustable sizes: S, M, L. • Compatible with EN148-1 type cartridges as M9000 range, sold separately. • Storage bag included. • Extra-large field of vision (210°) • Guaranteed maximum visual comfort • Adjustable size S/ M/ L CLIN 0006 Protective under hat (fire resistant) QTY 11 • Protective under hat (fire resistant) in acc. with EN ISO14116 EN1149-5 class A1A2B1C1F1 Composition: 68% wool, 30% modacrylic, 1% antistatic fibre, 225 g/m2