Inactive

This is a Sources Sought Notice for barracks furniture. This announcement constitutes the only notice for sources sought. Request for company background and capabilities brief are being sought and req... This is a Sources Sought Notice for barracks furniture. This announcement constitutes the only notice for sources sought. Request for company background and capabilities brief are being sought and requested for this notice. An official solicitation notice is NOT applicable at this time. The proposed acquisition is to be openly competed and the applicable NAICS is 337124 with a size standard of 750 employees. Any quotes provided will not be accepted, or considered, in response to this sources sought. This document is for information and planning purposes and to allow industry the opportunity to verify reasonableness and feasibility of the requirement for consideration in the overall acquisition strategy, as well as to promote competition. Historically this type of requirement has been procured on an Unrestricted basis under the Navy Blanket Purchase Agreements (BPA). Marine Corps Installation-East (MCI-East) Contracting Department is seeking information from all business types to reassess the market and its capability. This information will also help in determining the appropriate level of competition and/or small business subcontracting goals for this requirement. Submit written responses to Chris Rabassi via email at chris.rabassi@usmc.mil, no later than 4:00 PM, 8 May 2020. Please state your ability to provide the following items: Metal Bed with 2 Lockable Drawers. -Bunkable with or without bunking brackets -Overall Dimensions with Headboard/Footboard:-Height: 34 inches to 36 inches, Length: 86 inches to 88 inches, Width: 40 inches to 42 inches -Ladder Style Bed Ends contain minimum of 14 sets of pin settings to accommodate height adjustments where warranted from 0 inches to 36 inches height -Assembly of bed accomplished with a hook or similar assembly (no tools required) -Powder coated steel -High Pressure Steel, thickness, 1.2 to 1.5 mm (18 to 16 gauge)- -Lockable Drawers shall consist of recessed locking device, -Metal Drawer Fronts-2 Lockable Drawers, minimum dimensions of 24 inches wide by 24 inches long by 6inches high -Double roller-bearing drawer glides -Bed supporting capacity: minimum 550 lbs. (combined weight person/gear) -Ability to support at minimum a 38 inch wide by 80 inch long by inch high mattress. -Depth of bed: 10 inches to 12 inches -Headboard panel: double-sided high-pressure wood laminate that consists of 50-52 pounds. particleboard core with 2 to 3 mm wood grain -PVC fused edge banding to match wood laminate panels. -Metal, rivets, brackets, and welding points shall be powder-coated and shall be smooth to the touch and visually without dimple or indentation -Wood Laminate Color: Similar to Tuscan Walnut -Metal Color: Tan or similar -Manufacturer warranty must be stated 2-Door Ventilated Wardrobe -Height: 77 inches to 80 inches, Width: 38 inches to 44 inches, Depth: 23 inches to 28 inches -High Pressure Steel, thickness, 1.2 to 1.5 mm (18 - 16 gauge), powder-coated metal with epoxy finish. -Solid Back Panel-Side Panels: Cut with diamond cut pattern ventilated holes -Front: Two doors with diamond cut pattern ventilated holes, left and right outswing (toward user) with the maximum opening capability of 180 degrees. -Interior: (1-2) fixed shelfs and full width clothes rod under-shelf; fixed shelfs shall be flush with back interior wall - (3) Chrome Hooks, (1) inside each door, (1) on back panel-Three-point latching system with padlock hasp -Equipped with (4) adjustable plastic nylon floor glides -Metal, rivets, brackets, and welding points shall be powder-coated and shall be smooth to the touch and visually without dimple or indentation -Shipped Fully Assembled -Metal Color: Tan or similar -Manufacturer warranty must be stated Twin-Mattress -Width: 36 inches to 38 inches, Length: 78 inches to 80 inches, Thickness: 8 inches to 10 inches -Provide two-sided Twin XL mattress with minimum 364 double, heat-tempered steel, Bonnell innerspring coils (minimum of 12.75 gauge Steel), and each coil with minimum one turn per inch -Edge support with 6-gauge minimum border wire secured to the outer row of perimeter coils by helicals to protect the edges from premature breakdown -Wire border must be butt-welded at ends (support seating usage) -All sides shall be completely enclosed with adequate padding so no sharp edges or coils can be felt through sides. -Smooth, dark- colored, outer-cover of breathable, soft, and comfortable polyurethane-coated nylon fabric or similar Polybrominated Diphenyl Ether (PDBE) and Polyvinyl Chloride (PVC) material and shall have inverted seams to resist raveling and zippering if stitches are broken or cut -Mattress shall have a bonded, flame resistant and chemical-free insulation pad or fire retardant fiber (laminated to the outer cover) on top and bottom as a fire barrier -Beneath the fire barrier, a minimum of 1.5 thick High Resilience (HR) polyurethane high density foam with an unfilled density of at least 1.5 pounds per cubic foot and minimum Indentation Load Deflection (ILD) of 30 on both sides of mattress -Product must be fluid proof, hypoallergenic, bug resistant, antimicrobial, antistatic, crack resistant, and flame retardant -Flame retardant chemicals shall not be used to meet FR requirements Meet CPSC 16 CFR 1632 and 16 CFR 1633 -Manufacturer warranty minimum of 10 years Blanket -Brand name or similar to Valley Forge Fabric Ships Ahoy! 2/ At Ease, -Double Sided Vertical Stripe Fleece Blanket Twin XL, double-sided fleece Comforter/ Blanket -Width: 66 inches to 68 inches, Length: 90 inches to 92 inches -Shall be inherently flame retardant (meeting NFPA 260 standards) with material weight no less than 4.1 oz. per square yard per each side and at least 87% Post-Consumer Recycled Polyester, 13% Virgin Polyester -Machine Washable (washable to 160F, tumble dry to 140F) -Shall be patterned such that each side is a different but coordinated medium to dark colors -Internal framing component, knife edge finish, Monofilament polyester thread to match comforter/blanket with minimum 10 stitches per inch, single stitched -Fabric and fabrication shall be made in the U.S., blanket shall comply with the Berry Amendment -Material samples/swatches shall be forwarded at time of proposal submission -Color(s)/design to be determined at Pre-Installation Meeting -Manufacturer warranty must be specified INFORMATION REQUESTED: Specifically, MCI-East is seeking written responses (contractor format is acceptable) to the following strategic sourcing and company specific questions (Any information provided is voluntary. Telephone calls will not be accepted): Is your business Small or Large? If small, is your business a small business concern? If yes, which type? (8A, SDVOSB, WOSB, etc…) In order to support this requirement: Is your business capable of supporting a high volume request? If yes, please providing supporting documentation, such as previous projects or government contracts awarded. What were your strengths? What were your deficiencies? How have you remedied deficiencies? Or improved? In addition to the above, please provide the following information: Company's Name, Business Address, Point of Contact (POC), telephone, and fax number. Include business size/type (Large, Veteran-Owned, 8a, HUBZone, SDB, JWOD, Women-owned, etc), cage code, email address, website (if applicable), GSA contract number (if applicable), experience, and an overview of your company. If your company has a current Navy Furniture BPA, please provide the BPA number. If you company currently provides the furniture under a GSA schedule, please provide the GSA schedule number. This announcement is not a contract, a request for proposal, a promise to contract, or a commitment of any kind on the part of the Government. The information provided herein is subject to change and in no way binds the Government to solicit for or award a contract. The Government will not pay for any effort expended or any material provided in response to this announcement, nor will the Government return any data provided.