Inactive 8(a) Set-Aside (FAR 19.8)

The Distribution Management Office (DMO), Marine Corps Base Hawaii (MCBH), has a requirement for the removal of workstation cubicles where the contractor shall be capable of providing all supervision,... The Distribution Management Office (DMO), Marine Corps Base Hawaii (MCBH), has a requirement for the removal of workstation cubicles where the contractor shall be capable of providing all supervision, labor, and equipment. The purpose of this requirement is to assist with the removal of workstations from the DMO office so that the flooring can be replaced. The DMO Office will be responsible for providing all guidance to the contractor while the work is being conducted. There are thirteen workstation cubicles located within the DMO Office. Each workstation will need to be disassembled and transported to the warehouse next door. The warehouse is attached to the same building as the office and is the next door over. There are no stairs or ramps leading into the warehouse In the warehouse, a DMO representative will provide a specific location to put the workstation pieces. After the flooring is completed, DMO will need the workstations brought back into the office and reassembled. The contractor should have basic knowledge of disassembling and reassembling office equipment. All help desk access and customer service will be conducted Monday through Friday from 0630 to 1630 Hawaii Standard Time. The contractor must be able to access MCBH and follow all rules and regulations governing the base.