Inactive

The minimum specification includes the following features: GSM CORE solution that provides the following components: Infinite Software License for up to 50 attached devices Unlimited Number of Attache... The minimum specification includes the following features: GSM CORE solution that provides the following components: Infinite Software License for up to 50 attached devices Unlimited Number of Attached GSM/UMTS Base Stations Short Message Service Center (SMSC) Multimedia Messaging Server Center (MMSC) up to 20 messages per minute Authentication Center (AUC) supporting MILENAGE SIP Trunking feature to allow connection to other private core networks GSM (2G) GSN to support data attachments IP-based GSM Base Station Site including the following: IP-based GSM Pico BTS (1800 MHz) Customized Suitcase chassis supporting 1 TRX at 1800 MHz GSM Range Enhancement Package including: up to 20W PA, Duplexer Filter and PSU Antenna Kit--Omni or Sector Antenna with 10M RF cable GSM/UMTS Chatterbox Load Generator including voice and SMS generation software. The Chatterbox will support 850/900/1800/1900 MHz in 2G GSM and Bands 1, 2, 4, 5 and 8 in 3G UMTS. This equipment will be delivered in a 3RU shock-mounted transit case. The unit will be fully populated with 64 GSM/UMTS Programmable SIM cards. Ten (10) Handsets with battery and charger to support 2G/3G/4G (Nokia 5.3 or similar) Twenty-Five (25) GSM/UMTS/LTE/CDMA Programmable SIM card 5.8 GHz IP Microwave Radio Hop (pair), external antennas & cables (supports up to 200 Mbps) Three (3) Remote Technical Phone Support (8x5 M-F). This Technical Support Plan covers a period of one year and is renewable annually. This will also include existing equipment purchased from TLC. Five (5) days Operational Training (Per Day on Site at MCBH) to include travel expenses. for 2 Engineers to provide operational training at 3rd Radio Bn (MCBH) facility. Specifications: Dynamometer shall have a minimum torque measurement of 7,000 ft-lbs Dynamometer shall have minimum horse power measurement of 1800 Dynamometer shall have minimum speed measurement of 4000 RPM Dynamometer controller shall be programmable allowing various engines to be tested Dynamometer must have external oil cooler Engine mounted torsional coupling (adapter) allowing the dynamometer to test, at a minimum, the following engine configurations: Cummins 525 at 2212 lb-ft, 1549 Lb-ft, and 811 lb-ft. Interface between computer and dynamometer controller Software (with license included) shall analyze motor performance Load assembly system which provides the ability to test the output of the engine. Air starting system which provides the capability to start the engine remotely. Cooling system which provides the capability to cool the engine while it is being tested on the dynamometer. Sub base to have a fixed foundation to sustain maximum performance capability of dynamometer Universal drive shaft Floor mounted cart guides with the ability to hold the cart in place. Adjustable wheeled engine cart allowing engine swap to be easily manageable. Able to handle minimum weight of 8000 pounds. The cart must have adjustable brackets to be used to hold the engine in place. Calibration instrument which provides the government the ability to calibrate the dynometer localy, eliminating the need to contact the manufacturer to calibrate. Fueling system, to include pump, tank, and filter Minimum of 1 year equipment and software warranty