Inactive

Sources Sought For Multiple UH-1N and TH-1H Assets FROM: Anthony Light/411 GULBA TO: DLA/AWB LOCATION: Robins AFB, GA 31098-1813 FBO Post Title: Intent to Procure UH-1N Rotor Masts and TH-1H 90 Degree... Sources Sought For Multiple UH-1N and TH-1H Assets FROM: Anthony Light/411 GULBA TO: DLA/AWB LOCATION: Robins AFB, GA 31098-1813 FBO Post Title: Intent to Procure UH-1N Rotor Masts and TH-1H 90 Degree Gearboxes and 45 Degree gearboxes. SUBJECT: New procurement of the UH-1N Gate Valves, Rotor Masts, and Inner Rings and TH-1H 90 Degree Gearboxes and 45 Degree gearboxes on PR FD2060-25-00223. NSN P/N Noun 1615-00-255-2896 204-040-366-15 Rotor Mast 1615-01-008-7748 212-040-004-9 90 Degree Gearbox 1615-01-015-0584 212-040-003-023 42 Degree Gearbox 4820-00-991-3255 205-060-612-3 Gate Valve ITEM DESCRIPTION: The Rotor Mast is an assembly of parts not all having the same item name which is used as an extension between the transmission and rotor hub on the UH-1N ACFT. The 90 Degree Gearbox is located at the top of the tail-boom vertical fin. The gearbox provides 90-degree change in direction of the drive train and 2.6:1 speed reduction between input driveshaft and its output shaft on which the tail rotor is mounted. The gearbox consists of mating input and output gear quill assemblies set into a gear case provided with a breather-type oil filler cap, oil level sight gauge, and a drain plug with a chip detector. The input quill has a flexible coupling for attachment of driveshaft. Control linkage is attached on the left side with a control rod extending through the rotor shaft. The 42 Degree Gearbox is an intermediate gearbox located on the tail-boom, at the base of the vertical fin. This gearbox provides a 42-degree change in direction of the tail rotor drive-shafts, with no speed change. The gearbox assembly consists of a case with a gear quill in each end. The case is fitted with an oil filter cap, an oil level sight gauge, and a drain plug equipped with a magnetic insert. The input and output quills have flexible couplings for attachment of drive-shafts. Access is provided by a vented cover with quick- release fasteners. The Gate Valve is a Motor Operated Fuel Shutoff Valve that is part of the Filter Fuel System Installation of the TH-1H and UH-1N ACFTs. The fuel shutoff valves open or close to control the flow of fuel to the engines. Power is supplied to these valves by the essential bus through circuit breakers. INTEREST The DLA/AWB Contracting Office intends to award a sole source contract to Bell Textron Inc. All interested parties may identify their interest and capability to respond to the requirement no later than 11 March 2025 to Anthony Light anthony.light.2@us.af.mil and/or April Walls april.walls@us.af.mil . The Government intends to procure these items using Other Than Full and Open Competition as prescribed by FAR 6.302-1, only One Responsible Source and No Other Supplies or Services Will Satisfy Agency Requirements. Impediment to Competition: The original equipment manufacturer and source of supply for the above items is Bell Textron INC. (CAGE 97499). The Government does not own any data, drawings, schematics, or any other releasable technical data in support of this requirement. As a result, Bell Textron INC. is the only known source with adequate knowledge of performance requirements and possession of the required technical data and capabilities need to procure this item and ensure compatibility of the equipment. DISCLAIMER: This Sources Sought Synopsis is for informational purposes only. This is not a request for proposal. It does not constitute a solicitation and shall not be construed as a commitment by the government. Responses in any form are not offers, and the government is under no obligation to award a contract as a result of this announcement. No funds are available to pay for preparation of responses to this announcement. Any information submitted by respondents to this technical description is strictly voluntary.