Inactive

The Government is conducting market research to identify potential sources that possess the repair data, expertise, capabilities, and experience to meet qualification requirements to repair the F-15 V... The Government is conducting market research to identify potential sources that possess the repair data, expertise, capabilities, and experience to meet qualification requirements to repair the F-15 Very High Speed Integrated (VHSIC) Central Computer (CC). The National Stock Number (NSN) and Part Number (PN) are as follows: ITEM VHSIC NSN 1270-01-514-4336FX P/N 134A600-101 The VHSIC is currently repaired by Lockheed Martin Corp. (Cage Code 03640) under contract FA8522-17-D-0007 that expires 19 Sept 2022. The Repair Method Code (RMC)/Repair Method Suffix Code (RMSC) code for the VHSIC is R3/R.9 (See Note 1 below). The technical data required to organically repair or compete the repair is not owned by the Government, and is uneconomical to acquire the data by purchase or to reverse engineer the item. No samples are available for potential suppliers to evaluate. Contractor shall furnish all material, support equipment, tools, test equipment, and services. The contractor is responsible for providing, maintaining, and calibrating all support equipment required at their facility or a subcontractor’s facility. Contractor furnished material or parts used for replacement shall equal or exceed the quality of the original material or parts. Lockheed Martin Corp. is the manufacturer of the VHSIC and the known sole source contractor for repair of this item. Contractors/Institutions responding to this market research are placed on notice that participation in this survey may not ensure participation in future solicitations or contract awards. The government will not reimburse participants for any expenses associated with their participation in this survey. Note 1 RMC R3 - Repair, for the second or subsequent time, directly from the actual manufacturer. RMSC R. The Government does not own the data or the rights to the data needed to contract repair of this part from additional sources. It has been determined to be uneconomical to buy the data or rights to the data. It is uneconomical to reverse engineer the part. This code is used when the Government did not initially purchase the data and/or rights. If only one source has the rights or data to repair this item, RMCs 3, 4, or 5 are valid. If two or more sources have the rights or data to repair this item, RMCs 1 or 2 are valid). FAR 52.215-3, Request for Information or Solicitation for Planning Purposes (Oct 1997) applies to this request for proposal: (a) The Government does not intend to award a contract on the basis of this request or to otherwise pay for the information solicited except as provided in subsection 31.205-18 Bid and Proposal (B&P) Costs, of Federal Acquisition Regulation (b) Although "proposal" and "offeror" are used in this Request for Information, your response will be treated as information only. It shall not be used as a proposal. (c) This solicitation is issued for the purpose of: informational planning and budgetary forecasting by the government. INSTRUCTIONS: The document(s) below contain a description of the VHSIC repair requirements and a Contractor Capability Survey. The Survey allows Contractors to provide their company’s capability. If, after reviewing these documents, you desire to participate in the market research, you should provide documentation that supports your company’s capability in meeting these requirements. Failure to provide documentation may result in the government being unable to adequately assess your capabilities. If you lack sufficient experience in a particular area, please provide details explaining how you would overcome the lack of experience/capabilities in order to perform that portion of the requirement (i.e., teaming, subcontracting, etc.) Identify any areas of work that your organization believes should be broken out exclusively for Small Business. Both large and small businesses are encouraged to participate in this Market Research. Joint ventures or teaming arrangements are encouraged. Questions relative to this market survey should be addressed to Maureen Sandrock, Program Manager, 478-222-8054 (cell 618-363-2197) or via email at maureen.sandrock.2@us.af.mil. F-15 Very High Speed (VHSIC) Central Computer (CC) PURPOSE/DESCRIPTION The Government is conducting market research to identify potential sources that possess the expertise, capabilities, and experience to meet qualification requirements to provide depot-level test and repair of the F-15 Very High Speed (VHSIC) Central Computer (CC) The National Stock Number (NSN) and Part Number (PN) are as follows: Item VHSIC NSN 1270-01-514-4336FX PN 134A600-101 The VHSIC is a Line Replaceable Unit (LRU) on the F-15 C and D models and has one VHSIC per aircraft. The VHSIC provides the pilot with steering and weapon delivery cues, target data, avionic system status, weapons configuration and flight data in the air-to-air attack, air-to-ground attack, and ADI modes of operation The VHSIC was developed by Lockheed Martin. The service shall include providing obsolete parts resolution along with the necessary engineering to investigate Deficiency Reports and Material Improvement Projects (MIPs). The VHSIC must meet form, fit, function, and interface requirements as defined by the Government. However, the Government does not own the data or the rights to the data needed to compete the repair of this part. It has been determined to be uneconomical to reverse engineer the data, qualify a new source, or buy the data and/or data rights. Lockheed Martin is the only source of known repair for this system and has been since it was fielded. CONTRACTOR CAPABILITY SURVEY F-15E Very High Speed Integrated (VHSIC) Central Computer (CC) Part I. Business Information Please provide the following business information for your company/institution and for any teaming or joint venture partners: · Company/Institute Name: · Address: · Point of Contact: · CAGE Code: Phone Number: E-mail Address: Web Page URL: · Size of business pursuant to North American Industry Classification System (NAICS) Code: NAICS Code 811219 – Other Electronic and Precision Equipment Repair and Maintenance Based on the above NAICS Code, state whether your company is: Small Business (Yes / No) Woman Owned Small Business (Yes / No) Small Disadvantaged Business (Yes / No) 8(a) Certified (Yes / No) HUBZone Certified (Yes / No) Veteran Owned Small Business (Yes / No) Service Disabled Veteran Small Business (Yes / No) System for Award Management (SAM) (Yes / No) A statement as to whether your company is domestically or foreign owned (if foreign, please indicate the country of ownership). Responses to the Capability Survey Part I and Part II must be received no later than close of business 3/25/2021. Please ensure data is in a readable electronic format that can be received through a firewall. Attachments shall not to exceed 10 MB per email. Multiple emails are acceptable. Responses must be sent via email to the following: PCO: Erin Perdue, erin.perdue@us.af.mil Buyer: Teresa Duval, teresa.duval@us.af.mil Deborah Manly Buyer: PM: Maureen Sandrock, maureen.sandrock.2@us.af.mil Questions relative to this market research should be addressed to Maureen Sandrock, Program Manager, 478-222-8054 (cell 618-363-2197) or via email at maureen.sandrock.2@us.af.mil. Part II. Capability Survey Questions General Capability Questions: Describe briefly the capabilities of your facility and nature of the goods and/or services you provide. Include a description of your staff composition and management structure. Describe your company's past experience on previous projects similar in complexity to this requirement. Include contract numbers, a brief description of the work performed, period of performance, and agency/organization supported. Describe your company’s experience in repairing the F-15 VHSIC. Describe your company's capabilities for generating, handling, processing and storing classified material and data. What is your company’s current maximum capacity per month for this particular type of requirement? Provide information on any facility reserves you may possess to increase capacity in the event of an immediate need do to critical operational mission requirements. Repair Questions: Describe your capabilities and experience in repairing existing systems/equipment (hardware and software) to solve maintenance and support problems in the depot environment. Describe your configuration management processes and how you identify and resolve parts obsolescence and diminishing manufacturing sources problems? Discuss your process for addressing any fit, form, and or function issues that may arise out of this effort. Describe your process for maintaining inventory records and reporting on hand/work-in-process balances and repair status to your customer. How will your organization address the absence of drawings, specifications, technical data, test procedures, etc. If the item cannot be repaired in total, state what your organization can repair. Commerciality Questions: Are there established catalog or market prices for our requirement? If you offer this product and/or service to both U.S. Government and commercial sources, is the same workforce used for both the U.S. Government and general public? Describe your standard warranty and return process for goods and services furnished to the government for items similar in nature to this requirement.