Inactive

The United States Air Force through Air Force Sustainment Center (AFSC), Tinker AFB 73145 is contemplating the purchase of new manufacture CYLINDER ASSEMBLY, FORWARD. PART OFSTABILATOR ACTUATOR, PART ... The United States Air Force through Air Force Sustainment Center (AFSC), Tinker AFB 73145 is contemplating the purchase of new manufacture CYLINDER ASSEMBLY, FORWARD. PART OFSTABILATOR ACTUATOR, PART NUMBER 3831000-12. A firm fixed price, fixed quantity type contract is contemplated. This is a sole source requirement to Parker-Hannifin Corporation (Cage 82106). The requirements set forth in this notice are defined per Purchase Requests FD2030-22-00104 as follows: Written response is required. Purchase Request: FD2030-22-00104 NEW MANUFACTURE OF HYDRAULIC MANIFOLD ASSEMBLY Item 0001: Servocylinder NSN: 1650-00-315-0859 HS; Min: 3 Max: 18 Estimated Qty 12 each. AMC/AMSC: 3/P Function: Cylinder assembly Dimensions: 13.00” L x 4.00” W x 6.00” H and weighs 7.00 lbs. Material: Aluminum Delivery: Minimum qty 3 Medium Qty 11 Max Qty: 17 On or before: ARO 4 ea every 30 days ARO and reparable asset. Early delivery is acceptable. Ship To: DLA Distribution Depot Hill 7537 WARDLEIGH RD BLDG 849W CML 385 519 8898 HILL AFB UT 84056-5734, UT 84056-5734 USA Qualification Requirements: QUALIFICATION REQUIREMENTS APPLY. For qualification information/source approval requests contact the Source Development Office, OC-ALC/SB (405) 739-7243. Award will be based on meeting our requirements and cannot be delayed pending qualification of additional sources. Part requires engineering source approval by the design control activity in order to maintain the quality of the part. Existing unique design capability, engineering skills, and manufacturing knowledge by the qualified source(s) require acquisition of the part from approve sources. Current approved sources include: PARKER-HANNIFIN CORPORATION CAGE CODE: 82106 Export Control: N/A This is a sole source requirement to Parker-Hannifin Corporation (Cage 82106). Set-aside: N/A Sent to the OEM directly. In accordance with FAR 5.207(c)(16)(ii), when using the sole source authority at 6.302-1, all responsible sources may submit a capability statement, proposal, or quotation, which shall be considered by the agency. All questions regarding this notice are to be submitted in writing via E-mail. All questions submitted to this office are subject to be posted in this notice along with the appropriate response(s). Vendor identities will not be disclosed. Prospective offerors must comply with all the requirements of the solicitation and any attachments thereto to be considered responsive. All offerors are to specify in their response whether they are a large business, small business, small disadvantaged business, 8(a) concern, women-owned small business, HUBZone small business, veteran-owned small business or service-disabled veteran-owned small business. Also offerors must specify whether they are a U.S. or foreign-owned firm. OMBUDSMAN (AUG 2005) (An Ombudsman has been appointed to hear concerns from offerors or potential offerors during the proposal development phase of this acquisition). The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor concerns, issues, disagreements, and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as to source of the concern. The Ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call the Ombudsman at 405-736-3273. DO NOT CALL THIS NUMBER FOR SOLICITATION REQUESTS. Electronic procedures will be used for this solicitation.

Inactive

THERE IS NO SOLICITATION AVAILABLE AT THIS TIME. REQUESTS FOR A SOLICITATION WILL NOT RECEIVE A RESPONSE. This Sources Sought Synopsis (SSS) is in support of Market Research being conducted by the Uni... THERE IS NO SOLICITATION AVAILABLE AT THIS TIME. REQUESTS FOR A SOLICITATION WILL NOT RECEIVE A RESPONSE. This Sources Sought Synopsis (SSS) is in support of Market Research being conducted by the United States Air Force to identify potential manufacturing sources and to determine if this effort can be competitive or a Small Business Set-Aside. This is not a Request for Proposal (or solicitation) or an indication that a contractual commitment will exist for this requirement. The government does not intend to award a contract on the basis of this market research. No funds are available to fund the information solicited. The 423rd Supply Chain Management Squadron located at Tinker Air Force Base is requesting information, pursuant to FAR PART 10, in support of Market Research to identify potential sources for the manufacture of the NSN(s) listed below. The Government will use this information to determine the best future acquisition strategy for this procurement, inclusive of the need to do an Industry Day and/or Pre-solicitation Conference. The government does have the associated technical data to provide to potential sources. Interested parties will be given instructions on how to access the technical data upon request. This part requires engineering source approval by the design control activity in order to maintain the quality of the part. Existing unique design capability, engineering skills, and manufacturing knowledge by the qualified source(s) require acquisition of the part from the approved source(s). An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. The qualification procedures must be approved by the Government engineering activity having jurisdiction over the part in the intended application. See attached 848 SCMG MQR, 17 Aug 2020 for additional information on qualification requirements. The proposed North American Industry Classification Systems (NAICS) Code is 336412, which has a corresponding size standard of 1,500 employees. The Government will consider manufacturers NAICS 336413, size standard 1,250 employees. The Government is interested in all businesses to include, Large Business, Small Business, Small Disadvantaged Businesses 8(a)s, Service-Disabled Veteran-Owned Small Businesses, Hub zone Businesses, and Women-Owned Small Businesses. The government requests that interested parties respond to this notice if applicable and identify your small business status to the identified NAICS code. Additionally, please provide any anticipated teaming arrangements, along with a description of similar services offered to the Government and to commercial customers for the past three years. Any responses involving teaming agreements should delineate between the work that will be accomplished by the prime, and the work accomplished by the teaming partners. The contractor shall be capable of furnishing all required labor, material, facilities and equipment to accomplish manufacture, test, preservation and packaging, and return to the government a completely serviceable unit. Contractor will be responsible for supply chain management, logistics, forecasting of parts, long-lead parts procurement, reparable forecasting, obsolescence issues and delivery of serviceable assets. The government requests that interested parties respond, in writing to this notice indicating their interest in becoming a qualified source. The specific requirement for this effort is found the table below. Application: F-15 The item is a SERVOCYLINDER Part Number: 3831251-13 NSN: 1650-00-315-0859HS Estimated Requirement: 12 ea AMC/AMSC 3D PURCHASE REQUEST NUMBER PR#: FD20302200104-00 The work specified in this SSS has associated technical data available for distribution. Potential sources for this effort shall be companies who qualified manufacturers with the ability to complete the work described in this SSS. Companies interested in performing the work specified, and have met the requirements stated above, should submit this information to the requirements workflow at the following address. Please include the PR number in the subject line of the request to ensure the action is routed to the responsible organization Please e-mail your response advising if the requirements stated above can be met to the following address: 423SCMS.FedBizOps.Inquiries@us.af.mil. This SSS is issued solely for informational and planning purposes. No funds are available to fund the information requested. The information in this notice is current as of the publication date but is subject to change and is not binding to the Government. Oral submissions of information are not acceptable. Submit the following information also: Company Name and Address Cage Code DUNs Number Company business size by NAIC code Small Business Type (s), if applicable Point of Contact for questions and/or clarification Telephone Number, fax number, and email address Web Page URL Teaming Partners (if applicable) Provide any recommendations and/or concerns. Responses and/or questions to this synopsis will be posted through https://sam.gov.