Inactive

1. Estimated solicitation issue date: 29 December 2022; Estimated closing/response date: 28 January 2023. **These dates are subject to change. Solicitation will be posted to FBO and attached to this s... 1. Estimated solicitation issue date: 29 December 2022; Estimated closing/response date: 28 January 2023. **These dates are subject to change. Solicitation will be posted to FBO and attached to this synopsis when it is issued. Closing/response date will be noted on the solicitation. ** 2. PR number: FD2030-02-102432. 3. Remanufacture. KC135 Heat Exchanger. 4. RMC: R1/C. 5. Item: Precooler designed to cool bleed air for use in air conditioning system consists of hot air passages and cooling air passages within the core 10 inches width 11 inches height steel 6. NSN and P/N: NSN: 1660011401976 P/N: 184380-3-2 7. Description: Heat Exchanger, Air. Three Year (One Basic Year Plus Two One-Year Options) Requirements contract is contemplated. All quantities are estimated. 8. Total Line Item Quantity: Best Estimated Quantities are as follows: Basic Year: 336 each Option Year 1: 336 each Option Year 2: 336 each Over and Above: To Be Negotiated (as needed). Data: Not Separately Priced. 9. Application: KC-135. 10. Destination: TBD. 11. Delivery: 35 each every 30 days after receipt of a funded delivery order and/or reps. Early delivery is acceptable 12. Qualification Requirements: QUALIFICATION REQUIREMENTS APPLY. Interested vendors that have not been previously qualified for this acquisition must submit a Source Approval Request (SAR) package to the Source Development, Small Business Office at 405-739-7243. As prescribed in FAR 9.202(e), the contracting officer need not delay a proposed award in order to provide a potential offeror with an opportunity to demonstrate its ability to meet the standards specified for qualification. Part requires engineering source approval by the design control activity in order to maintain the quality of the part. Existing unique design capability, engineering skills, and manufacturing knowledge by the qualified source(s) require acquisition of the part from approve sources. Current approved sources include: Ametek MRO Defense dba Drake Air In (Cage Code 0GDJ0) Elite Aerospace (Cage Code 1WFQ3) Honeywell Aerospace Tulsa/Lori (Cage Code 63389) Limco MFG (Cage Code 16630) Sherwood Aviation (Cage Code 3EM37) 13. Export Control: Not Applicable. 14. UID Note to Contractor: UID Note to Contractor: If unit price exceeds $5,000, then UID requirements will apply. 15. Applicable Tech Orders: In order to receive any technical data related to this acquisition, offerors must send an email request the buyer point of contact. Release of any data is subject to applicable data rights. The request shall be on company letterhead and include the applicable solicitation number, the specific data needed (including TO and/or drawing numbers), and a copy of the current, approved DD Form 2345. The form, including instructions for completing the form, is available at: http://www.dtic.mil/whs/directives/infomgt/forms/forminfo/forminfopage2220.html. The Government is not responsible for incomplete, misdirected, or untimely requests. ** APPLICABLE TECHNICAL ORDERS Specific Technical Orders PART NUMBER REMANUFACTURE MANUAL/TO NUMBER TITLE/REVISION AND/OR OTHER DIRECTIVES (AFTO FORM 252) 184380-3-2 9P9-4-3 VERHAUL INSTRUCTIONS WITH ILLUSTRATED PARTS BREAKDOWN PRIMARY HEAT EXCHANGER General Technical Orders TO NUMBER DATE TITLE 00-5-1 14 JUN 2016 AF TECHNICAL ORDER SYSTEM 00-5-3 1 APRIL 2016 AF TECHNICAL ORDER LIFE CYCLE MANAGEMENT 00-35D-54 1 SEPT 2015 USAF DEFICIENCY REPORTING, INVESTIGATION AND RESOLUTION OTHER PUBLICATIONS FOR INFORMATION PURPOSES ONLY NOTE: These publications are for information purposes only. Air Force Manuals DOCUMENT NUMBER DATE TITLE AFI 23-101 12 DEC 2016 AIR FORCE MATERIAL MANAGEMENT AFMAN 23-215 6 AUG 2001 REPORTING OF SUPPLY DISCREPANCIES DoD/Air Force Forms FORM NUMBER TITLE SF 364 REPORT OF DISCREPANCY SF 368 QUALITY DEFICIENCY REPORT DD1574 DD1574-1 SERVICEABLE TAG – MATERIEL SERVICEABLE LABEL – MATERIEL DD1577-2 DD1577-3 UNSERVICEABLE (REPAIRABLE) TAG – MATERIEL UNSERVICEABLE (REPAIRABLE) LABEL – MATERIEL DD1577 DD1577-1 UNSERVICEABLE (CONDEMNED) TAG – MATERIEL UNSERVICEABLE (CONDEMNED) LABEL – MATERIEL DD1575 DD1575-1 SUSPENDED TAG – MATERIEL SUSPENDED LABEL – MATERIEL AFMC FORM 158 PACKAGING REQUIREMENTS CONTRACTOR DOCUMENTS PART NUMBER DRAWING NUMBER TITLE AND DATE N/A 16. Electronic procedures will be used for this solicitation. Note: An Ombudsman has been appointed to hear concerns from offerors or potential offerors during the proposal development phase of this acquisition. The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor concerns, issues, disagreements, and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as to source of the concern. The Ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call Ombudsman at (405) 736-3273. DO NOT CALL THIS NUMBER FOR SOLICATION REQUESTS. 17. Point of Contact: Bridgette Miles; Phone: 405-739-3459; Email: bridgette.miles@us.af.mil.

Inactive

INTERESTED SOURCES MUST SELECT “ADD ME TO INTERESTED VENDORS” BUTTON ABOVE OR BELOW TO BE CONSIDERED PARTICIPANTS IN THIS MARKET RESEARCH EFFORT BY THE “CLOSING DATE” OF THIS NOTICE. THERE IS NO SOLIC... INTERESTED SOURCES MUST SELECT “ADD ME TO INTERESTED VENDORS” BUTTON ABOVE OR BELOW TO BE CONSIDERED PARTICIPANTS IN THIS MARKET RESEARCH EFFORT BY THE “CLOSING DATE” OF THIS NOTICE. THERE IS NO SOLICITATION AVAILABLE AT THIS TIME. REQUESTS FOR A SOLICITATION WILL NOT RECEIVE A RESPONSE. PURPOSE This Sources Sought Synopsis (SSS) is in support of market research being conducted by the United States Air Force (USAF). This market research is being conducted to notify potential sources of the upcoming requirement and to re-advertise the qualification requirements for the subject item. Additionally, this notice will gauge small business interest. The determination to make this acquisition a Small Business Set-Aside is dependent on the number of small businesses approved to satisfy this requirement. The Government will use the information gathered through publication of this SSS to determine the best acquisition strategy for this requirement. The Government is interested in all potential sources including Small Businesses, Small Disadvantaged Businesses, 8(a) businesses, Service-Disabled Veteran-Owned Small Businesses, HUBZone Small Businesses, Women-Owned Small Businesses, etc. Potential sources shall be capable of furnishing all labor, materials, facilities and equipment required to accomplish the manufacture of the item(s) listed below. Generally, the work to be accomplished includes disassembly, cleaning, inspection, assembly, testing, preservation, and packaging to return an unserviceable asset to a serviceable condition. Additionally, potential sources may be responsible for supply chain management, logistics planning, forecasting production requirements, long-lead time parts procurement, and shipping serviceable assets. Potential sources may be responsible for nonrecurring engineering costs associated with becoming an approved source. DESCRIPTION North American Industry Classification System (NAICS) Code: 336413 (Other Aircraft Parts and Auxiliary Equipment Manufacturing) SBA Size Standard: 1,250 employees Requirement Information: Remanufacture of KC135 Heat Exchanger PRODUCTION INFORMATION P/N NSN Noun Est. Requirement 184380-3-2 1660-01-140-1976RX Heat Exchanger YR 1 - 180 YR 2 - 180 YR 3 - 180 ESTIMATED SOLICITATION INFORMATION Estimated Solicitation Date: Nov 2022 Estimated Solicitation Closing/Response Date: Dec 2022 PR#: FD20302102432 CONTRACTOR CAPABILITY SURVEY & TECHNICAL DATA Potential sources wishing to be qualified to perform the requirement specified above are REQUIRED to complete a Source Approval Request (SAR) package as specified in the Qualification Requirements for this item. QRs and Repair Data List (RDL), if applicable, are attached to this notice. The QR attached to this document is for reference only. The official synopsis of the QRs for this item can be found by searching www.sam.gov for the keyword “RQR-848”. Changes to the item list or QRs will be published to the official synopsis, not this notice. Government provided data is annotated on the RDL attached to this posting. Absence of an RDL indicates the Government cannot provide technical data and that potential sources are required to independently acquire the necessary technical data to satisfy this requirement. Vendors requesting Government-provided technical data should specifically review section 9 of the QR. Requests for technical data in response to this SSS posting should be submitted to the Tinker TO Public Sales Office at AFLCMC.LZP.PUBSALES@us.af.mil. SAR packages and SAR-process questions should be submitted to the AFSC Small Business Office at: AFSC/SB 3001 Staff Drive, Suite 1AG 85A Tinker AFB, OK 73145-3009 Email: afsc.sb.workflow@us.af.mil Website: https://www.afsc.af.mil/units/sbo/index.asp NOTE: Potential sources should only submit SAR related questions to the above contact. Inquiries of a technical nature should be submitted to the cognizant engineering activity at 423SCMS.FedBizOps.Inquiries@us.af.mil. Disclaimer: This SSS is issued solely for informational and planning purposes. It does not constitute a solicitation (Request for Information, Request for Proposal, or Request for Quotation) or a promise to issue a solicitation in the future. The information in this notice is based on current information as of the publication date. The information in this notice is subject to change and is not binding to the Government. If changes are made, updated information will be provided in future notices and will be posted on the Federal Business Opportunities website at www.sam.gov Responses to this SSS may or may not be returned. Contractors not responding to this SSS will not be precluded from participation in any future solicitation. INTERESTED SOURCES MUST SELECT “ADD ME TO INTERESTED VENDORS” BUTTON ABOVE OR BELOW TO BE CONSIDERED PARTICIPANTS IN THIS MARKET RESEARCH EFFORT BY THE “CLOSING DATE” OF THIS NOTICE.