Inactive

1. Updated closing date 16 June 2020 3:00 PM --- ACTUAL issue date: 18 February 2020; ACTUAL closing/response date: 3 April 2020. 3:00 PM Estimated solicitation issue date: 14 February 2020; Estimated... 1. Updated closing date 16 June 2020 3:00 PM --- ACTUAL issue date: 18 February 2020; ACTUAL closing/response date: 3 April 2020. 3:00 PM Estimated solicitation issue date: 14 February 2020; Estimated solicitation closing/response date: 14 March 2020. **These dates are subject to change. Solicitation will be posted to https://beta.sam.gov/ and attached to this synopsis when it is issued. Closing/response date will be noted on the solicitation. ** 2. PR number: FD2030-20-00405. Solicitation number: FA8118-20-R-0016. 3. Service/Spare/Repair/OH: Remanufacture. 4. RMC/RMSC: R2/C. 5. Item: Remanufacture/Re-core of the C-5 Primary and Secondary Heat Exchanger(s) 6. NSN: 1660-00-456-8545 and 1660-00-456-8546. 7. P/N: 184720-4-1 and 184730-1-1. 8. Description: Dimensions 1660-00-456-8545 / 184720-4-1: Length 29.7500”, width: 27.1500", height: 14.7500", weight: 66.4000 LB. Material content: Steel, aluminum and various materials. Function: The heat exchanger precools hot bleed air for use in a compressor in the environmental control system. Description: Dimensions 1660-00-456-8546 / 184730-1-1: Length 33.8800”, width: 29.5000", height: 15.7500", weight: 40.9000 LB. Material content: Aluminum, steel and various materials. Function: The heat exchanger is a component of the air cycle refrigeration subsystem and is used to partially cool engine bleed air by transferring heat from the bleed air to ram air passing over the tubes and fins. 9. Total Line Item Quantity: Best Estimated Quantities are as follows: Remanufacture: 1660-00-456-8545 / 184720-4-1 Basic Year – 10 EA; Opt I – 10 EA; Opt II – 10 EA; Opt III – 10 EA; Opt IV – 10 EA. Remanufacture: 1660-00-456-8546 / 184730-1-1 Basic Year – 10 EA; Opt I – 10 EA; Opt II – 10 EA; Opt III – 10 EA; Opt IV – 10 EA. Over and Above: To Be Negotiated (as needed). Data: Not Separately Priced. 10. Application: C-5. 11. Destination: TBD. 12. Delivery: 1 EA every 30 days After Receipt of Order and Reparable, Whichever is Later. 5 year Requirements contract will be solicited, with 1 Basic Year and four-one year options. 13. Qualification Requirements DO apply. Initial Production Evaluation (IPE) may be required. Approved sources AeroKool Aviation and Honey Well Aerospace Tulsa/Lori. No set-asides applicable to this requirement. QRs are available at: https://beta.sam.gov/opp/b9af379898924595a2aa0f34d847b807/view?keywords=RQR-848&sort=-relevance&index=&is_active=true&page=1 14. Export Control: Not Applicable. 15. IUID Note to Contractor: IUID marking is required. Contractor Determined Location and Method. 16. Applicable Tech Orders: 15A4-55-3 Dated 30 November 2018 or later and 15A4-56-3 Dated 15 November 2018 or later. 17. Written procedures will be used for this solicitation. No telephone requests. Only written or faxed requests received directly from the requestor are acceptable. Note: An Ombudsman has been appointed to hear concerns from offerors or potential offerors during the proposal development phase of this acquisition. The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor concerns, issues, disagreements, and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as to source of the concern. The Ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call Ombudsman at (405) 736-3273. DO NOT CALL THIS NUMBER FOR SOLICATION REQUESTS. Note: Faxed solicitation requests can be submitted to AFSC/PZABB, Tinker AFB OK 73145 at FAX NUMBER (405) 739-4417. 18. Point of Contact: Eric Romero; Phone: 405-736-5555; Email: eric.romero.11@us.af.mil.