Inactive

The United States Government (USG) has a requirement to provide the International Engine Management Program (IEMP) members, with a 5-year (1-year basic and four 1-year options), firm-fixed price (FFP)... The United States Government (USG) has a requirement to provide the International Engine Management Program (IEMP) members, with a 5-year (1-year basic and four 1-year options), firm-fixed price (FFP), requirements contract for overhaul of F100-PW-220/229 balance segment assembly, from Paradigm Precision (CAGE: 1J4P3) . The delivery schedule of the component National Stock Numbers (NSNs) shall be as follows: NSN: 2840-01-454-8449NZ, 2840-01-308-4466NZ P/N: 4082959, 4079428, & 4070067 1. Estimated issue date for Solicitation: 26 May 2022 2. Estimated closing/response date for Solicitation: 27 June 2022 3. Request for Proposal (RFP) Number: FA8121-22-R-0026 4. PR Number(s): FD2030-22-31003 5. Nomenclature/Noun: F100-PW-220/229 Balance Segment Assembly 6. Overhaul NSN: 2840-01-454-8449NZ, 2840-01-308-4466NZ P/N: 4082959, 4079428, & 4070067 1. Required Delivery: Base + 4 Option Years 2. Destination: SW3211, Tinker AFB, OK 73145 3. Application (Engine or Aircraft): F100 4. History: FA8121-16F-0094 (awarded August 2016) and previously provided support on FA8121-11D-0016-00001 (awarded 27 September 17). 5. First Article Test: No 6. Set-Aside: N/A 7. Contract Type: Firm Fixed Price 8. Options: Yes 9. FMS: Yes 10. Qualification Requirements: Sources must be qualified prior to being considered for award. To be eligible for contract award, the offeror must be an approved source IAW FAR 52.209-1, Qualification Requirements. The Government is not required to delay contract award to review pending Source Approval Requests (SARs). Therefore, offerors are encouraged to submit SARs as soon as possible. If the Government has not completed review of a SAR when the contract is awarded, the SAR will be retained and the source will be reviewed as a possible source for future awards. Mandatory Language: All responsible sources may submit a bid, proposal, or quotation which shall be considered by the agency. Offerors must be an approved, qualified source prior to the solicitation closing date to be considered for award. All Offerors must be source approved before the closing of the solicitation to be considered for award. Item Unique Identification (IUID): If unit price exceeds $5,000.00, then IUID requirements will apply Ombudsman: An Ombudsman has been appointed to hear concerns from Offerors or potential Offerors during the proposal development phase of this acquisition. The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor concerns, issues, disagreements, and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as to source of concern. The Ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call the Ombudsman at (405) 736-3273. DO NOT CALL THIS NUMBER FOR SOLICITATION REQUESTS. Other Information: Electronic procedures will be used for this solicitation. Hardcopies of the solicitation will not be sent from this office. The solicitation will be available for download only at www.beta.sam.gov. Contract Funding: Release of Solicitations in Advance of Funding Availability Except for solicitations and contracts issued in accordance with FAR 32.703- 2(a) and clause 52.232-18, Availability of Funds, follow the procedures below when issuing solicitations in advance of available funds: (a) The following statement must be included in any such solicitation: “Notice to Offeror(s)/Supplier(s): Funds are not presently available for this effort. No award will be made under this solicitation until funds are available. The Government reserves the right to cancel this solicitation, either before or after the closing date. In the event the Government cancels this solicitation, the Government has no obligation to reimburse an offeror for any costs.” Buyer Name: Royce Abcede Email: royce.abcede@us.af.mil

Inactive

THERE IS NO SOLICITATION AVAILABLE AT THIS TIME. REQUESTS FOR A SOLICITATION WILL NOT RECEIVE A RESPONSE. PURPOSE This Sources Sought Synopsis (SSS) is in support of market research being conducted by... THERE IS NO SOLICITATION AVAILABLE AT THIS TIME. REQUESTS FOR A SOLICITATION WILL NOT RECEIVE A RESPONSE. PURPOSE This Sources Sought Synopsis (SSS) is in support of market research being conducted by the United States Air Force (USAF). This market research is being conducted to increase competition for this requirement by identifying potential sources and to gauge small business interest to determine whether or not this requirement can be satisfied with a Small Business Set-Aside. The Government will use the information gathered through publication of this SSS to determine the best acquisition strategy for this requirement. DESCRIPTION The AFLCMC/LPSIB organization, located at Tinker Air Force Base, is requesting information pursuant to FAR PART 10, in support of Market Research to identify potential sources for the overhaul of the F100-PW-220/229 Augmentor Balance Segment Assemblies National Stock Numbers (NSNs) in the attached list below. The Government will use this information to determine the best future acquisition strategy for this procurement, inclusive of the need to do an industry day and/or pre-solicitation conference. The proposed North American Industry Classification Systems (NAICS) Code is 336412 (Aircraft Engines and Engine Parts Manufacturing), which has a corresponding Size Standard of 1,500 employees. The Government is interested in all businesses to include, Large Business, Small Business, Small Disadvantaged Businesses 8(a)s, Service-Disabled Veteran-Owned Small Businesses, Hub-zone Businesses, and Women-Owned Small Businesses. The Government requests that interested parties respond to this notice if applicable and identify your small business status to the identified NAICS code. Additionally, please provide any anticipated teaming arrangements, along with a description of similar services offered to the Government and to commercial customers for the past three years. Any responses involving teaming agreements should delineate between the work that will be accomplished by the prime, and the work accomplished by the teaming partners. CONTRACTOR CAPABILITY SURVEY & TECHNICAL DATA The Government does not have the associated technical data to provide to potential sources. Consequently, any potential sources for this effort will need to undergo the Source Approval Requirement (SAR) process. The contractor shall be capable of furnishing all required labor, material, facilities and equipment to accomplish acquisition and packaging of completely serviceable units. Generally, the work to be accomplished includes disassembly, cleaning, inspection, assembly, testing, preservation, and packaging to return an unserviceable asset to a like-new condition. Additionally, potential sources may be responsible for supply chain management, logistics planning, forecasting production requirements, long-lead time parts procurement, diminishing manufacturing sources and material shortage issues, and shipping serviceable assets. Potential sources may be responsible for nonrecurring engineering costs associated with becoming an approved source. The Government requests that interested parties respond to this notice in writing including details of your ability to either provide a copy of the OEM’s overhaul manual (including disassembly, overhaul, test and an illustrated parts breakdown including part numbers) or an OEM licensee agreement certifying your business is approved by the OEM to overhaul this equipment. Companies interested in performing the work specified, and have met the requirements stated above, should submit this information (i.e. license or agreement information) to the cognizant engineering workflow at the following address: 423SCMS.FedBizOps.Inquiries@us.af.mil Potential sources wishing to be qualified to perform the requirement specified above are REQUIRED to complete a Source Approval Request (SAR) package as specified in RQR-PSD-1 attached. QRs and Repair Data List (RDL), if applicable, are attached to this notice. Government provided data is annotated on the RDL attached to this posting. Requests for technical data in response to this SSS posting should be submitted to the Tinker TO Public Sales Office at AFLCMC.LZP.PUBSALES@us.af.mil SAR packages and SAR-process questions should be submitted to the AFSC Small Business Office at: SAR submittal: https://www.tinker.af.mil/Home/429SCMS-SASPO/ Source Development Specialist Email: stacy.cochran@us.af.mil Due to COVID-19 and the increase in teleworking (social distancing) we ask that all SAR packages be temporarily submitted electronically through https://safe.apps.mil/. DoD safe is a safe option for large files. If you have a PKI certificate you can send directly, if you do not then send a request to: 429SCMS.SASPO.Workflow@us.af.mil or stacy.cochran@us.af.mil and include your email address and “request a drop off”. A “request for drop off” will be returned, use this to submit your SAR package. Thank you for your patience and understanding during this difficult time. PRODUCTION INFORMATION The specific requirement for this effort is found in the attachment below. The items are for the overhaul of F100-PW-220/229 Augmentor Balance Segment Assembly. Part Number NSN Quantity PWS SEE ATTACHED SEE ATTACHED SEE ATTACHED SEE ATTACHED ESTIMATED SOLICITATION INFORMATION Estimated Solicitation Date: March 2022 Estimated Solicitation Closing/Response Date: April 2022 PR#: FD2030-22-31003 Please e-mail your response advising if the requirements stated above can be met to the following address: treva.billinger@us.af.mil. This SSS is issued solely for informational and planning purposes. No funds are available to fund the information requested. The information in this notice is current as of the publication date but is subject to change and is not binding to the Government. Oral submissions of information are not acceptable. Submit the following information also: Company Name and Address Cage Code DUNs Number Company business size by NAIC code Small Business Type (s), if applicable Point of Contact for questions and/or clarification Telephone Number, fax number, and email address Web Page URL Teaming Partners (if applicable) OEM License/Agreement/Manual Provide any recommendations and/or concerns. Respond (along with the requested information) directly to: treva.billinger@us.af.mil