Inactive Total Small Business Set-Aside (FAR 19.5)

PLEASE SEE ATTACHED FOR FURTHER INFORMATION. (i) This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with addition... PLEASE SEE ATTACHED FOR FURTHER INFORMATION. (i) This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. The Simplified Acquisition Procedures (FAR 13) will be used for requirement. (ii) Solicitation Number: F1S0AY2167A001 This solicitation is issued as a Request for Quote (RFQ) (iii) This solicitation document and incorporated provisions and clauses are in effect through Federal Acquisition Circular 2022-06 and DPN 20220623 and AFAC 2022-0502. (iv) THIS REQUIRMENT WILL BE: 100% SMALL BUSINESS SET-ASIDE. NAICS Code is 333517, size standard 500 employees. (v) CLIN Nomenclature CLIN 0001 – One (1) each, Tabletop Laser Marking System for wire/cable CLIN 0002 – Shipping Charges (vi) Description of items to be acquired: The purpose of tabletop laser marking system is to perform modifications to the Test Vehicles per the Design Handbook and per the Temporary Modification Procedures AFMC Instructions 21-126 for aircraft located at Edwards AFB. This item must comply with MIL50881, AS50881, and BAC5152. It shall also conform to SAE ARP5607 (Legibility of Print). It can be equivalent to Model Number M-100L-FG-TT-A-MOD100 (air cooled system). A. The Laser Wire Marker Class 1 for use on open shop floor Integrated with 355 nm solid state UV YAG Laser Full graphics capability including upper and lower cases of alpha-numeric characters in any language, bar codes, logos, etc. Unlimited font/size selection and orientation (horizontal, vertical, and multiline) Mark spacing from 2.5mm (0.1 inch) to 2500mm (99.9 inch) Three (3) different messages and variable mark spacing along wire length B. Wire Processing 1. Machine speed of wire output is up to 100 ft/min 2. Wire sizes .75mm to 10mm, 26 AWG – 4 AWG 3. Single conductor wire or multi-core cable 4. Min/Max cable length: 1 inch to 400,000 inches 5. Any UV laser markable wires including, but not limited to TKT/TK wires such as BMS 13-60, M22759/80-92, ETFE, XL-ETFE such as BMS 13-48, M22759/32, etc. (vii) Delivery Date: MUST BE received NO LATER THAN 3 to 6 weeks after receipt of award. Please notate estimated delivery timeframes in quote.