AFMC Command Swing Space Furniture
*** 25 June 2024, the solicitation due date has been extended to 01 July 2024 at 11:00am EDT.*** Instructions to Offerors – Solicitation FA8601-24-Q-0117 This combined synopsis/solicitation is expecte... *** 25 June 2024, the solicitation due date has been extended to 01 July 2024 at 11:00am EDT.*** Instructions to Offerors – Solicitation FA8601-24-Q-0117 This combined synopsis/solicitation is expected to result in the award of a firm-fixed-price contract for providing Furniture for the AFMC Command Swing Space as described under the requirements section of this combined synopsis/solicitation and accompanying requirements attachment. This combined synopsis/solicitation is prepared in accordance with the format in the Federal Acquisition Regulation (FAR) Subpart 12.6, as supplemented with additional information included in this notice. This solicitation incorporates FAR provisions and clauses in effect through Federal Acquisition Circular (FAC) FAC 2023-04, effective 2 Jun 2023; Defense Federal Acquisition Regulation Supplement (DFARS) Publication Notice (DPN) 20230929, effective 29 September 2023; and Department of the Air Force Acquisition Regulation Supplement (DAFFARS) Air Force Acquisition Circular (AFAC) 2023-0707, effective 7 July 2023. This announcement constitutes the only combined synopsis/solicitation; proposals are being requested and a written solicitation will not be issued. An award, if any, will be made LPTA. Ie, to the lowest priced Offeror who submits a proposal that: 1. Conforms to the requirements of the combined synopsis/solicitation. 2. Receives a rating of “Acceptable” on the Technical Capability evaluation factor. 3. Contains the lowest total evaluated price (TEP), provided that the TEP is not unbalanced and is fair and reasonable. The combined synopsis/solicitation number for this requirement is FA8601-24-Q-0117 and is hereby issued as a Request for Quote (RFQ) using FAR Part 12, Acquisition of Commercial Items and FAR Part 13, Simplified Acquisition Procedures. Acceptable means of Submission: All submissions must be submitted electronically to both of the following email addresses, dametria.walder@us.af.mil and candice.snow@us.af.mil, by Monday, 01 July 2024 by 11:00 AM Eastern Standard Time. Any correspondence sent via email must contain the subject line “FA8601-24-Q-0117, AFMC Command Swing Space Furniture.” The entire proposal must be contained in a single email, unless otherwise approved, including attachments. Please note: due to the email server, any emails that exceed 5 megabytes might not go through. Emails with compressed files are not permitted. Note that email filters at Wright-Patterson Air Force Base are designed to filter emails without subject lines or with suspicious subject lines or content (i.e., .exe or .zip files). Therefore, if the specified subject line is not included, the e-mail may not get through the email filters. Also be advised that .zip or .exe files are not allowable attachments and may be deleted by the email filters at Wright-Patterson. If sending attachments with email, ensure only .pdf, .doc, .docx, .xls or .xlsx documents are sent. The email filter may delete any other form of attachments. A confirmation email will be sent once the proposal is received. If you do not receive a confirmation email within 24 hours of submitting the proposal, please reach out to the point of contact listed on the solicitation. Submittal of proposals in response to this combined synopsis/solicitation constitutes agreement by the Offeror to all terms & conditions contained herein, which will also be the terms & conditions of any resulting contract. It is the Offerors responsibility to be familiar with the applicable clauses and provisions. Clauses and provisions in full text may be accessed via the Internet website https://www.acquisition.gov. The Government reserves the right to award without discussions or make no award depending upon the quality, price fairness, and price reasonableness of the proposals received. Period of Performance: Installation to begin no later than 13 weeks after awarded finishes and design are finalized. Delivery Destination: Identified in Statement of Work (SOW). Delivery Type: FOB Destination (As defined in FAR 2.101—Definitions, the seller or consignor is responsible for the cost of shipping and risk of loss). Inspection and Acceptance: Both inspection and acceptance will be by the Government at Destination. Requirement: This package is to furnish the Command Swing Space on the first floor of building 266, (Area A) Wright Patterson AFB, OH 45433. The Contractor shall provide all supervision, labor, materials, equipment, and when applicable Certified Electrician to hook up the Furniture to Building power, including transportation to accomplish this project in accordance with the Statement of Work (SOW), project drawings, 30 days storage, removal of existing furniture, and the requirements contained in the soliciting documents. Contract Type: The anticipated award is Firm-Fixed Price. Basis for Award: The Government will award a contract resulting from this RFQ to the responsible Offeror whose offer conforms to the requirements outlined in Attachment 1 (SOW) and is most advantageous to the Government, lowest evaluated price of proposals meeting or exceeding the acceptability standards and other factors considered. Technical Capability and Price will be used to evaluate all offers. Technical or Quality: The proposal will be evaluated to the extent to which it can meet and/or exceed the Government’s requirements as outlined in the solicitation and based on the information requested in the instructions to offerors section of the solicitation. Price: The Government will evaluate the price by adding the total of all line item prices, including all options. The proposals may be in any format but MUST include: 1. Proposing company’s name, address, DUNS number, Cage Code, and TIN. 2. Point of contact’s name, phone, and email. 3. Proposal number & date. 4. Timeframe that the proposal is valid. 5. Individual item price. 6. Total price, No Progress Payments. 7. Shipping (FOB Destination). 8. Completed copy of representations and certifications (Attachment 2) 9. Itemized price-list which includes the dimensions and specification of each typical. 10. Provide overall floorplan drawing, overall 3D rendered floorplan, and detailed 3D renderings for each typical. Important Notice to Contractors: Proposals MUST also contain a complete description of items offered and any technical manuals or literature to clearly show that the items meet or exceed the requirements outlined in the Statement of Work (Attachment 1). Important Notice to Contractors: All prospective awardees are required to register at the System for Award Management (SAM) and to maintain active registration during the life of the contract. SAM can be accessed at https://www.sam.gov. Any award resulting from this combined synopsis/solicitation will include DFARS Clause 252.232-7003, Electronic Submission of Payment Requests. Section 1008 of the National Defense Authorization Act of Fiscal Year 2001 requires any claims for payment (invoices) under DoD contract to be submitted in electronic form. Wide Area Workflow – Receipt and Acceptance (WAWF – RA) is the DoD system of choice for implementing this statutory requirement. Use of the basic system is at no cost to the contractor. Contractors must complete vendor training, which is also available at no cost at http://www.wawftraining.com. Prior to submitting invoices in the production system, contractors must register for an account at http://wawf.eb.mil/. ADDITIONAL INSTRUCTIONS TO OFFERORS: The following paragraphs in the provision at FAR 52.212-1-Instructions to Offerors-Commercial Items are tailored as follows: (a) North American Industry Classification System (NAICS) code and small business size standard are as specified in the solicitation document. (b) Submission of offers is as prescribed in the text of this combined synopsis/solicitation. Proposal Content: The proposals may be in any format, but shall consist of two separate parts, a technical proposal and a price proposal. Proposal Detail: The proposal shall be clear, concise, and shall include sufficient detail for effective evaluation and for substantiating the validity of stated claims. The proposal should not simply rephrase or restate the Government's requirements, but rather shall provide convincing rationale to address how the offeror intends to meet the listed requirements. Offerors shall assume that the Government has no prior knowledge of their facilities and experience, and will base its evaluation on the information presented in the offer submitted. Embellishments Not Desired: Elaborate brochures or documentation, binding, detailed artwork, or other embellishments are unnecessary and are not desired. Technical Proposal: Describe how the offeror will provide for the furniture as described in the SOW. Attachments: Statement of Work (SOW) Offeror Reps & Certs Model Contract Drawings & Cutsheets Memo for 2019-009 Interim FAR Rule
Data sourced from SAM.gov.
View Official Posting »