Inactive

Request for Information Stability Augmenter System (SAS) Manual Tester This RFI will be used to identify potential sources in the industry that may be interested in acquisition opportunities with the ... Request for Information Stability Augmenter System (SAS) Manual Tester This RFI will be used to identify potential sources in the industry that may be interested in acquisition opportunities with the Government. The Government is conducting market research via this RFI/Source Sought to identify potential sources that possess the production and repair data, expertise, capabilities, and experience to meet qualification requirements to produce and repair the SAS Tester. The Government does have access to production/repair data or drawings for these items in JEDMICS. Additionally, the Government does have access or rights to any Technical Orders (TOs), parts prints, specifications, or reference material for the SAS Manual tester to include in this RFI. The Air Force (AF) is not in possession of a similar tester or any TOs, parts prints, specifications, or reference material of a similar tester. There are no SAS testers available for potential suppliers to evaluate. The Government has determined these items are non-commercial items. Both large and small businesses are encouraged to participate in this survey. However, this Sources Sought/RFI will, in part, assist the AF in determining set-aside potential. Contractors/Institutions responding to this market research are placed on notice that participation in this survey may not ensure participation in future solicitations or contract awards. The Government will not reimburse participants for any expenses associated with their participation in this survey. The following guidelines are provided to frame the SAS Manual Tester challenge: Designed with maximum use of commercial off the shelf (COTS) or modified off the shelf (MOTS) components Designed to operate in the harsh Flight-line environment Ability to interface with T-38 aircraft Designed to be deployable to support expeditionary operations at forward operating locations Transportable to be moved from one location to another via common military cargo aircraft with as minimal a logistics footprint as attainable Ability to operate without extensive supply chain In accordance with Federal Acquisition Regulation (FAR) 52.215-3: The Government does not intend to award a contract on the basis of this market research or to otherwise pay for the information solicited except as an allowable cost under other contracts as provided in subsection 31.205-18, Bid and proposal costs, of the FAR. Although "proposal" and "offeror" are used in this sources sought synopsis, your response will be treated as information only. It shall not be used as a proposal. This RFI is issued for the purpose of market research. INSTRUCTIONS: 1. Below is the Contractor Capability Survey. The Survey allows Contractors to provide their company’s capability. 2. If, after reviewing this document, you desire to participate in the market research, you should provide documentation that supports your company's capability in meeting these requirements. Failure to provide documentation may result in the Government being unable to adequately assess your capabilities. If you lack sufficient experience in a particular area, please provide details explaining how you would overcome the lack of experience/capabilities in order to perform that portion of the requirement (i.e., teaming, subcontracting, etc.) 3. Both large and small businesses are encouraged to participate this RFI. Joint ventures or teaming arrangements are encouraged. Respondents can devise their own solution approaches and system architecture(s) as long as the Government can obtain at least Government purpose data rights for the implemented architecture and that architecture complies with the other requirements of any associated development program(s). 4. Contractors/institutions responding to this market research are placed on notice that responding may not ensure participation in future solicitations or contract awards. This Request for Information (RFI) is issued for information and planning purposes only and does not constitute a solicitation. Responses to the RFI will not be returned. Responders are solely responsible for all expenses associated with responding to this RFI. The Government will not reimburse participants for any expenses associated with their participation in this survey. 5. Questions relative to this market survey should be addressed to the Procurement Contracting Officer (PCO) identified below. 6. The Responses must be received no later than close of business 06 September 2022. Responses must be submitted electronically via email to: tiffany.holmes.2@us.af.mil PURPOSE/DESCRIPTION: The Government is conducting market research to identify potential sources that possess the expertise, capabilities, and experience to produce and repair the SAS Manual Tester: NSN: 4920-00-731-7151 NOUN: Flight Control System Test Set PART NUMBER: 3-76790-501 The SAS Manual Tester is a portable, self-contained test unit designed to provide a functional check, isolate malfunctions, and aid in the calibration of the Stability Augmenter System. The Government's need for production and repair is required to support fielding for AF users. Therefore, this productin and repair strategy will consist of six months. The projected quantities are repair of 13 each and production of 8 each. The level of security clearance and amount of foreign participation in this requirement has not been determined. The contractor shall furnish all material, support equipment, tools, test equipment, and services. The contractor is responsible for providing, maintaining, and calibrating all support equipment required at their facility or a subcontractor's facility. Contractor furnished material or parts used for replacement shall equal or exceed the quality of the original material or parts. The AF does not own any proprietary data associated with this effort. Note: THIS IS A REQUEST FOR INFORMATION ONLY. The purpose of this RFI is to identify sources that can produce and repair the SAS Manual Tester. The AF has not made a commitment to procure any of the items/services discussed, and release of this RFI should not be construed as such a commitment or as authorization to incur cost for which reimbursement would be required or sought. All submissions become Government property and will not be returned. CONTRACTOR CAPABILITY SURVEY Part I. Business Information Please provide the following business information for your company/institution and for any teaming or joint venture partners: Company/Institute Name: DBA: Address: Point of Contact: CAGE Code: Phone Number: E-mail Address: Web Page URL: Based on NAICS Code 811219, state whether your company is: Large Business (Yes / No) Small Business (Yes / No) Woman Owned Small Business (Yes / No) Small Disadvantaged Business (Yes / No) 8(a) Certified (Yes / No) HUBZone Certified (Yes / No) Veteran Owned Small Business (Yes / No) Service Disabled Veteran Small Business (Yes / No) Central Contractor Registration (CCR). (Yes / No) A statement as to whether your company is domestically or foreign owned (if foreign, please indicate the country of ownership). NOTE: This questionnaire/survey is for obtaining information only. Companies are encouraged to provide responses to this questionnaire, but are advised that their participation is voluntary only. Keep responses to this RFI 3 – 5 pages in length. Part II. Capability Survey Questions A. General Capability Questions: 1. Describe your company’s experience in repair, testing and evaluation of the SAS Manual Tester, Part number 3-76790-501 (NSN 4920-00-731-7151) and/or similar testers. Provide approximate time required to produce and repair AS Manual Testers. 2. What quality assurance processes and test qualification practices does your company employ? Provide a description of your quality program (ISO 9001, AS9100, etc.). 3. Describe your company's experience in generating technical data, engineering drawings, and manuals. Identify the software programs used to generate data products and formats available for generated information. 4. Describe your company's past and/or current experience on projects related to commercially indicated countermeasure test sets similar in complexity to this requirement. Include contract numbers, a brief description of the work performed, period of performance, agency/organization supported, and individual point of contact (Contracting Officer or Program Manager). 5. Describe your company’s previous experience provisioning for USAF contracts, supporting cataloging actions, providing IUID information? B. Repair Questions: 1. How will your company address the absence of drawings, specifications, technical data, test procedures, etc. for the AS Manual Tester? 2. If the test set cannot be produced or repaired in total, state what your company can produce and repair, i.e. components of the test set, software, testing equipment, the case only, etc. 3. State any technology insertion ideas for the item that would be suitable for this effort. 4. Discuss any reverse engineering or item replacement opportunities that may be present. 5. Does your company repair a similar testers that is offered to the USAF or commercial sector? If so, is the product offered under similar terms and conditions to both the Government and commercial sectors? Briefly describe any differences. 6. What type of standard warranty would be provided on the repair of AS Manual Tester to include labor/technical support, covered parts, and length of warranty? 7. Does your company have the capability to provide a first article and what previous experience has your company had with providing first articles? C. Business Practices: 1. If your solution proposes proprietary data, are you willing to sell all the proprietary data to the Government? 2. Describe test procedures and inspection processes associated with this effort. For example, NDI/T. CONTRACTOR CAPABILITY SURVEY Part I. Business Information Please provide the following business information for your company/institution and for any teaming or joint venture partners: • Company/Institute Name: • Address: • Point of Contact: • CAGE Code: • Phone Number: • E-mail Address: • Web Page URL: • Size of business pursuant to North American Industry Classification System (NAICS) Code: NOTE: The NAICS code for this effort is 334220. Based on the above NAICS Code, state whether your company is: • Small Business (Yes / No) • Woman Owned Small Business (Yes / No) • Small Disadvantaged Business (Yes / No) • 8(a) Certified (Yes / No) • HUBZone Certified (Yes / No) • Veteran Owned Small Business (Yes / No) • Service-Disabled Veteran Small Business (Yes / No) • Central Contractor Registration (CCR) (Yes / No) • A statement as to whether your company is domestically or foreign owned (if foreign, please indicate the country of ownership). Part II. Capability Survey Questions A. General Capability Questions: 1. Briefly describe the capabilities of your facility and nature of the goods and/or services you provide. Include a description of your staff composition and management structure. 2. Describe your company's experience on previous projects similar in complexity to this requirement. Include contract numbers, a brief description of the work performed, period of performance, agency/organization supported, and individual point of contact (Contracting Officer and/or Program Manager). 3. Describe your company’s ability and approach to meeting the technical outcomes for accomplishing the objectives of this RFI. What percentage of the effort is anticipated to be accomplished by your company? What percentage is anticipated to be subcontracted? 4. Describe your company's capabilities for generating, handling, processing, and storing classified material and data. 5. Describe your company's capabilities and experience in generating technical data, engineering drawings, and manuals. Identify/name your company’s Model Based Systems Engineering (MBSE) tool(s) and list the design, logistics, and configuration control artifacts you generate using these tools and what formats are available for delivery of artifacts from these tools. 6. What quality assurance processes and test qualification practices does your company employ? Provide a description of your quality program (ISO 9001, AS9100, etc.). 7. Size of business pursuant to North American Industry Classification System (NAICS) Code: B. Design, Develop, Test, Qualify, Produce, and Field a prototype Questions: 1. Describe your capabilities and experience with designing and developing a prototype design with regard to the requirements of this effort. 2. Describe your experience with utilizing Agile software design principles/processes and how you would employ such processes on the requirements of this effort. 3. Describe your capabilities and experience in producing, developing/modifying repair or maintenance procedures. Include associated upgrade of technical orders and preparation of new technical orders. 4. Describe your capabilities and experience in test and evaluation of newly developed capabilities. Include dates, duration, and the names of relevant government test agencies you have worked with during the described experiences, including your role and theirs. 5. Include a description of facilities and equipment available to support this requirement. 6. Describe your standard warranty and return process for goods and services furnished to the Government for items similar in nature to this requirement. 7. Provide the contact information for your Defense Contract Management Agency (DCMA) representative. 8. Describe your experience and processes in producing products that are fully compliant with Department of Defense Cybersecurity/Risk Management Framework (RMF) and Anti-tamper requirements. Describe the qualifications of your Systems Security Engineers to work on these areas. C. Manufacturing Questions: 1. Describe your capabilities and experience in manufacturing with regard to the requirements of this effort. 2. Describe your capabilities and experience in developing/modifying manufacturing procedures. Include associated upgrade of technical orders and preparation of new technical orders related specifically to manufacturing. 3. Demonstrate your ability and experience in the manufacture of the same or similar components, which are currently utilized in the commercial or military environment, by providing the following information on the same or similar items: a) Contract Number b) Procuring Agency c) Contract Value d) Number of assets shipped. 4. Describe your capabilities and experience in test, evaluation, and repair processes/procedures with regard to manufacturing items. 5. Describe your configuration management processes and how you identify and resolve parts obsolescence and diminishing manufacturing sources problems. 6. Describe your supply chain processes with particular attention on protecting against the introduction of counterfeit parts into production, maintenance, and repair lines. 7. Include a description of facilities and equipment, including quantities, available to satisfy the requirements of this effort. 8. Describe what specific manufacturing activities of the described effort you would propose being accomplished in-house versus subcontracting. 9. State any technology insertion ideas for the item that would be suitable for this effort. D. Engineering Services Questions (Contractor logistic support, other services not listed) 1. Describe your services capabilities and experience as relevant/applicable to the requirements of this effort. 2. Describe the technical risk and problem areas for this requirement, including any anticipated interfaces/technical inputs required to implement effective fighter armament tester solutions. 3. Describe your company’s technical capabilities, ability and experience in producing adaptable, scalable, modular system architectures with common interfaces using Modular Open Systems Architecture (MOSA) compliant designs. 4. Demonstrate your ability and experience with performing the same or similar services, which are currently provided in the commercial and/or military environment, by providing the following information on the same or similar services: a) Contract Number b) Procuring Agency c) Contract Value d) Services Provided 5. Describe your capabilities and experience with performing test, evaluation, and repair processes/procedures related to sustainment and maintenance on end products similar to those described as being delivered as part of this effort. 6. Describe how you/your organization will identify and resolve parts obsolescence and diminishing manufacturing sources problems during maintenance and sustainment of the capability developed and fielded. 7. Describe your processes for maintaining inventory records and reporting on hand/work-in-process balance and manufacturing status to your customer as required. 8. Describe your capabilities, personnel, facilities, and experience performing Top Secret / Sensitive Compartmented Information (SCI) level programs for the Department of Defense.