Inactive

Requirement restricted to qualified source(s). All non-qualified vendors that submit a proposal in support of this requirement must comply with qualification requirements found in clause 52.209-1, and... Requirement restricted to qualified source(s). All non-qualified vendors that submit a proposal in support of this requirement must comply with qualification requirements found in clause 52.209-1, and the source qualification statement attached hereto, in order to be considered for award. Award shall not be delayed to qualify new sources. The requirement is not an inherently government function. Repair efforts is deemed performance based. Critical safety item (CSI) does not apply to this PI. 1.0 SCOPE OF WORK: For the end item, the contractor shall furnish all facilities, parts, materials, equipment and services, required to inspect and, if necessary, restore to serviceable condition. Work consists of one of three efforts: Test, teardown, and evaluation (TT&E) only, TT&E and Minor Repair, TT&E and Major Repair. 1.1 TEST, TEARDOWN, AND EVALUATION: (FFP) The contractor shall perform visual, mechanical and electrical testing of the end item, reusable or replacement component parts, and materials according to the schedule in the contract to determine the condition of the end item. Upon completion of this task, all of the components of the end item requiring repair or replacement will be identified by part number, NSN (if applicable), nomenclature, and location in the assembly. This information will be reported in writing to the Procurement Contracting Officer (PCO)/ Defense Contract Management Agency (DCMA) Administrative Contracting Officer (ACO) and, if necessary, approval to repair will be negotiated. If no further repair is required, the asset must be returned in serviceable like new condition. 1.2 MINOR REPAIR: (NTE) Minor repair is a repair that does not require total disassembly of the end item or replacement of major subcomponents. A minor repair candidate typically requires external adjustments or rework in order to meet all of the electrical specifications in accordance with the Technical Order Test Procedure and mechanical dimensions in accordance with the outline drawing. It would include repair or replacement of damaged or missing minor external parts as required. Test each end item IAW the specifications for P/N’s as listed in the contract schedule. If minor repair is initiated and it is found that, in order to return the end item to serviceable condition that the level of repair must increase to a major repair, the DCMA Government representative (ACO/PCO or QAR) will be notified and give the notice to proceed to the major repair category.) 1.3 MAJOR REPAIR: (NTE) Defined as an end item that is beyond the minor repair category to the extent that the end item is to be disassembled or reconstituted. This could be due to extensive mechanical damage, extensive disassembly to access or replace subcomponents and/or replacement of major subcomponents. As with minor repair, the end item will be tested IAW the specifications and Government approved test procedures to verify correct Form, Fit, Function and Interface of the P/N’s listed in the contract schedule.)

Inactive

Pre-Solicitation: This is a pre-solicitation synopsis in accordance with FAR 5.201. This is not a Request for Proposal or Quote (RFP/RFQ) or an Invitation For Bid (IFB), nor is it construed as a commi... Pre-Solicitation: This is a pre-solicitation synopsis in accordance with FAR 5.201. This is not a Request for Proposal or Quote (RFP/RFQ) or an Invitation For Bid (IFB), nor is it construed as a commitment by the Government. The synopsis is prepared for the purpose of notifying potential offerors of an upcoming solicitation. It is anticipated that a solicitation will be released in mid-April or soon thereafter. The Solicitation (FA8250-25-R-0647) and any/all attachments will be made available on SAM.GOV. Interested parties are responsible for monitoring this site to ensure they have the most up-to-date information about this solicitation. All responsible sources may submit a capability statement, proposal, or quotation, which shall be considered by the agency. Requirement restricted to qualified source(s). All non-qualified vendors that wish to submit a proposal in support of this requirement must comply with qualification requirements found in clause 52.209-1, and the source qualification statement attached hereto, in order to be considered for award. Award shall not be delayed qualifying new sources. 1. Requirements: PR Number(s): FD20202500647 Line Item: 0001 – TT&E NSN: 5430010798076ZR TANK, LIQUID STORAGE P/N: 353D663G01, P/N: 353D663, Description: oil tank assembly Supp. Description: tubes, nuts, packings, screws, washers, transformers, conductor, terminal, wires, bushings, insulator Quantity: 6.0000 EA Applicable to: None Delivery: *90 Days *ARO After Receipt of Carcass Destn: PLANT Quantity: 6.00 Unit of Issue: EA Line Item: 0002 – Minor Repair NSN: 5430010798076ZR TANK, LIQUID STORAGE P/N: 353D663G01, P/N: 353D663, Quantity: 6.0000 EA Applicable to: None Delivery: *60 Days *ARO After Completion of Study Destn: SW3215, BARSTOW CA 92311-5014,06 ,92311-5014. Quantity: 6.00 Unit of Issue: EA Line Item: 0003 – Major Repair NSN: 5430010798076ZR TANK, LIQUID STORAGE P/N: 353D663G01, P/N: 353D663, Quantity: 6.0000 EA Applicable to: None Delivery: *120 Days *ARO After Completion of Study Destn: SW3215, BARSTOW CA 92311-5014,06 ,92311-5014. Quantity: 6.00 Unit of Issue: EA Line Item: 0004 – TT&E NSN: 5840014830555ZR RADAR SET SUBASSEMB P/N: 1366839 Description: REGULATOR ASSEMBLY, PFN Supp. Description: STEEL, COPPER, ALUMIUM Quantity: 2.0000 EA Applicable to: None Delivery: *30 Days *ARO After Receipt of Carcass Destn: PLANT Quantity: 2.00 Unit of Issue: EA Line Item: 0005 – Minor Repair NSN: 5840014830555ZR RADAR SET SUBASSEMB P/N: 1366839, Quantity: 2.0000 EA Applicable to: None Delivery: *60 Days *ARO After Completion of Study Destn: SW3215, BARSTOW CA 92311-5014,06 ,92311-5014. Quantity: 2.00 Unit of Issue: EA Line Item: 0006 – Major Repair NSN: 5840014830555ZR RADAR SET SUBASSEMB P/N: 1366839, Quantity: 2.0000 EA Applicable to: None Delivery: *120 Days *ARO After Completion of Study Destn: SW3215, BARSTOW CA 92311-5014,06 ,92311-5014. Quantity: 2.00 Unit of Issue: EA Line Item: 0007 – CAV AF Data Description: IAW DD 1423-1 A001 A002 A003 CAV-AF Quantity: 1.0000 EA Delivery: IAW DD 1423-1 IAW DD 1423-1 Destn: FB2029, HILL AFB UT 84056,49 ,84056-4056. Quantity: 1.00 Unit of Issue: EA Line Item: 0008 – RIIR Data Description: IAW DD 1423-1 B001 RIIR Quantity: 3.0000 EA Delivery: IAW DD 1423-1 IAW DD 1423-1 Destn: FY2073, HILL AFB UT 84056-5820,49 ,84056-4056. Quantity: 3.00 Unit of Issue: EA Line Item: 0009 – CPP Data Description: IAW DD 1423-1 C001 CPP Quantity: 3.0000 EA Delivery: IAW DD 1423-1 IAW DD 1423-1 Destn: FY2073, HILL AFB UT 84056-5820,49 ,84056-4056. Quantity: 3.00 Unit of Issue: EA Line Item: 0010 – ECP Data Description: IAW DD 1423-1 D001 ENGINEERING CHANGE Quantity: 3.0000 EA Delivery: IAW DD 1423-1 IAW DD 1423-1 Destn: FY2073, HILL AFB UT 84056-5820,49 ,84056-4056. Quantity: 3.00 Unit of Issue: EA Line Item: 0011 – Test Procedure Data Description: IAW DD 1423-1 E001 TEST PROCEDURE Quantity: 3.0000 EA Delivery: IAW DD 1423-1 IAW DD 1423-1 Destn: FY2073, HILL AFB UT 84056-5820,49 ,84056-4056. Quantity: 3.00 Unit of Issue: EA Line Item: 0012 – Test/Inspection Report Data Description: IAW DD 1423-1 F001 TEST/INSPECTION REPORT Quantity: 3.0000 EA Delivery: IAW DD 1423-1 IAW DD 1423-1 Destn: FY2073, HILL AFB UT 84056-5820,49 ,84056-4056. Quantity: 3.00 Unit of Issue: EA 2. Contract Type: Firm-Fixed Price (FFP) TT&E, Not to Exceed (NTE) Minor/Major Repair 3. Acquisition Type: Other Than Full & Open Competition to Qualified Manufacturers 4. The requirement is not an inherently government function. Repair efforts is deemed performance based. Critical safety item (CSI) does not apply to this PI. 5. Electronic procedure will be used for this solicitation.